Design a Product/Solution for Protecting Car Windshields from Hail

  • Status: Closed
  • Hadiah: $215
  • Penyertaan Diterima: 14
  • Pemenang: Svinarchuk

Ringkasan Peraduan

Hi, freelancers! I'm looking for the best concept of a product that will protect car windshields from hail. There is no strict framework so your imagination and creativity are welcome. There are some requirements though:

1) The product must be possible to mass produce
2) The product cost must be as low as possible
3) It must be simple to apply
4) It should withstand even the biggest/strongest hail storm

Here are the criteria that will be used to select the winner:

1) Clear and clean concept description. Please use graphics if needed to describe your idea.
2) Amount of details provided regarding manufacturing and materials sourcing, i.e. you explained what materials will be needed and where to get them. A bonus will be given if you would explain the manufacturing process.
3) The product will be suitable for the largest market. This means that your product will be simple to manufacture and to use. It will also be cheap and will fit the majority of cars.
4) You compared your product to the existing alternatives.
5) Images, drawings, or renderings provided.

Please feel free to contact me should you have any questions.

Kemahiran Disyorkan

Penyertaan teratas dari peraduan ini

Lihat Lebih Banyak Entri

Papan Penjelasan Umum

  • swapnilshandilya
    swapnilshandilya
    • 5 tahun yang lalu

    Please check entry 23

    • 5 tahun yang lalu
  • Onega
    Penganjur Peraduan
    • 5 tahun yang lalu

    I know you can't submit your revised images. What you can do is just upload your new design to dropbox or any other website that allows image sharing and then just send me a link in comments to your entries.

    • 5 tahun yang lalu
    1. deaakk
      deaakk
      • 5 tahun yang lalu

      Check 10 comments please

      • 5 tahun yang lalu
  • Onega
    Penganjur Peraduan
    • 5 tahun yang lalu

    Guys, this is a GUARANTEED contest. So go through my comments on your entries, correct everything and you may be selected as a winner. I will need to choose one anyhow so whoever will be able to leverage my feedback more efficiently to improve his/her idea will win.

    • 5 tahun yang lalu
    1. swapnilshandilya
      swapnilshandilya
      • 5 tahun yang lalu

      how much time we have?

      • 5 tahun yang lalu
    2. Onega
      Penganjur Peraduan
      • 5 tahun yang lalu

      the first who will achieve a feasible concept will be awarded. I need this ASAP!

      • 5 tahun yang lalu
  • Onega
    Penganjur Peraduan
    • 5 tahun yang lalu

    Guys, please re-evaluate your fixtures. That is the main common issue.

    1) How do you make sure the product will fit all the windshield sizes? How do you ensure tension?

    2) Suction cups will not be sufficient.
    Wind can blow from a side. On example of Toyota Corolla some simple wind calculations result in approximate 450-650 lbs load (depending on the wind speed and drag coefficient) if the wind blows on the whole area of the screen. Even if it blows on a quarter of that area, it's still 100-150 lbs. Even if we use the 50 lbs suction cups (which are huge by the way!), the safety factor is close to 1 (not even taking into account that the load will be mainly immersed on two suction cups when the wind will be blowing from a side). This is not reliable from the engineering standpoint. I know you have some skills, and you can do better! Put some more thought into this!

    • 5 tahun yang lalu
    1. deaakk
      deaakk
      • 5 tahun yang lalu

      I proposed a solution, please check #10

      • 5 tahun yang lalu
    2. Onega
      Penganjur Peraduan
      • 5 tahun yang lalu

      Replied

      • 5 tahun yang lalu
  • rmissin
    rmissin
    • 5 tahun yang lalu

    Looks like someone's going for a refund, yet another example of the "Guaranteed" tag being absolutely meaningless.

    • 5 tahun yang lalu
    1. Onega
      Penganjur Peraduan
      • 5 tahun yang lalu

      Nope. If you would see the entries you would understand why I rejected all of them.

      • 5 tahun yang lalu
    2. Onega
      Penganjur Peraduan
      • 5 tahun yang lalu

      Generally speaking - not well thought

      • 5 tahun yang lalu
  • saptarshi14datta
    saptarshi14datta
    • 5 tahun yang lalu

    I have proposed the Wing Guard design concept. For further information please contact me directly.

    • 5 tahun yang lalu
    1. Onega
      Penganjur Peraduan
      • 5 tahun yang lalu

      If you solve the problems I outlined you will have all the chances to win this contest.

      • 5 tahun yang lalu
    2. Onega
      Penganjur Peraduan
      • 5 tahun yang lalu

      So far, you are probably the closest

      • 5 tahun yang lalu
  • Onega
    Penganjur Peraduan
    • 5 tahun yang lalu

    Com'on guys. I know you can do better. Almost everyone proposed the idea with suction cups. They won't be able to hold the protection during strong wind.Also, please consider that every car's windshield is different in size. So if your idea requires tightening the screen suction cups won't work for sure.

    • 5 tahun yang lalu
  • swapnilshandilya
    swapnilshandilya
    • 5 tahun yang lalu

    Please consider my proposal

    • 5 tahun yang lalu
    1. Onega
      Penganjur Peraduan
      • 5 tahun yang lalu

      Reviewed

      • 5 tahun yang lalu
    2. Onega
      Penganjur Peraduan
      • 5 tahun yang lalu

      Please reply to my questions asap

      • 5 tahun yang lalu
  • Onega
    Penganjur Peraduan
    • 5 tahun yang lalu

    I advise all freelancers planning to submit their solutions to do it ASAP so that you will have some time for adding modifications.

    • 5 tahun yang lalu
    1. kctcmadanpur
      kctcmadanpur
      • 5 tahun yang lalu

      I am working on it, and in the middle of completing work, will submit soon.

      • 5 tahun yang lalu
  • darshandarni
    darshandarni
    • 5 tahun yang lalu

    I'm a professional and expert in ANSYS.

    And i worked 3 years in BOEING Aircraft manufacturing company as ANSYS expert.

    I have published 45+ journal research papers.

    And i'm CEO of Winsun Global Tech in Bangalore, India and i have my employees who are expert in ANSYS and i'm taking 100's of academic projects per year based on ANSYS and have 5 year experience in ANSYS, UG-NX, CATIA, CAD/CAM.

    And i have 10 employees who are expert in different fields like ANSYS, UG-NX, CATIA, CAD/CAM, HYPERMESH, AUTOCAD, MATLAB, SOLID WORKS.

    And i have hard working employees working under me and we delivery you quality services at nominal price. Please provide actual feedback to ensure continuous improvement and suggest improvement points. I am a versatile professional with over 5 years of rich design experience and work hard to give you good service .

    • 5 tahun yang lalu
    1. Onega
      Penganjur Peraduan
      • 5 tahun yang lalu

      Ok, great. Waiting for your entry!

      • 5 tahun yang lalu
  • Onega
    Penganjur Peraduan
    • 5 tahun yang lalu

    Please NOTE: Nice looking renderings/pictures are cool, but what I'm mainly looking for is an idea. I can make renderings myself. So please, if it takes you a while to make them, substitute them with sketches.

    • 5 tahun yang lalu
  • telalovicr
    telalovicr
    • 5 tahun yang lalu

    Please, give me your feedback about my product. I can change some details if you dont like it, but i think this is the best solution for this kind of problem. I can make you this product for car, not just for car windshield. :)

    • 5 tahun yang lalu
    1. Onega
      Penganjur Peraduan
      • 5 tahun yang lalu

      Hi! Thanks for your entry. I will review it shortly

      • 5 tahun yang lalu
  • hajji2015
    hajji2015
    • 5 tahun yang lalu

    Hello,
    I have a Master's degree in Mechanical Engineering. I have 4+ years experience as a Designer. My services include the following CAD / SolidWorks 2014, SolidWorks 2015 and AutoCAD 2014 daily /:
    - Design products based on your information and reference for AISI, ESKD, DIN and ISO;
    - Create 3D models of parts and / or assemblies;
    - Create 3D models from 2D drawings or blueprints marked prints, catalog references, sketches and other information;
    - Generate 2D documentation;
    - 3D presentations and animations of some of reference; - Establish tooling parts / assemblies, with the necessary documentation. Regards,

    • 5 tahun yang lalu
    1. msarma
      msarma
      • 5 tahun yang lalu

      Hi Onega, Will the car be moving or stationary or both when this system will be used?

      • 5 tahun yang lalu
    2. Onega
      Penganjur Peraduan
      • 5 tahun yang lalu

      It's better if you can come with a solution that would allow cars to move while being protected

      • 5 tahun yang lalu
  • amienaeem
    amienaeem
    • 5 tahun yang lalu

    hello friend , very nice and use full idea >>>>>>>>>>.i start working >>>>>>>>>>>>>>>>

    • 5 tahun yang lalu
    1. Onega
      Penganjur Peraduan
      • 5 tahun yang lalu

      Thank you. Waiting for your entry!

      • 5 tahun yang lalu

Tunjukkan lebih banyak komen

Bagaimana untuk mulakan dengan peraduan

  • Siarkan peraduan anda

    Siarkan Peraduan Anda Cepat dan mudah

  • Dapatkan berjuta penyertaan

    Dapatkan Bertan-tan Penyertaan Dari serata dunia

  • Anugerahkan penyertaan terbaik

    Anugerahkan penyertaan terbaik Muat turun fail - Mudah!

Siarkan Peraduan Sekarang atau Sertai kami Hari Ini!