I need some Graphic Design for a macbook decal

  • Status: Closed
  • Hadiah: $20
  • Penyertaan diterima: 5
  • Pemenang: HemaMaximDesign

Keterangan Peraduan

I need a decal designed based off of the attached images. The decal will be used to overlay on the back of a macbook.

The decal image will be the shoe. You will need to design a decal image based off the reference shoe pics that I have attached.
Use the same colors as in the reference pics.


The shoe image will be placed above the the white glowing macbook light. This light will make the bottom of the shoe glow.

The shoe image will lay over the apple light and cause the bottom of the shoe to glow light in the reference pics.

when submitting a image for consideration, please use the macbook image to make a proper mockup.

Kemahiran-kemahiran Cadangan

Maklum balas Majikan

“These guys are pros. Not only did they design a great image. They also gave me advice about printing my decal. Hire them asap for your next design project!”

Gambar Profil stevie504, United States.

Penyertaan teratas dari peraduan ini

Lihat Penyertaan Lain

Papan Penerangan Awam

  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Hi, Stevie.

    We're just informing you that this message board will be closed by Freelancer automatically within next 4 days. If you still wish to contact us and/or require additional help with delivered designs please contact us on one of our sources incl. email and Skype.

    All the best! :)
    HEMA-MAXIM Team.

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Link sent. Let us know if there's anything else you may need.

    • 2 tahun yang lalu
  • stevie504
    Pemegang Peraduan
    • 2 tahun yang lalu

    ok sent. thanks

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Hi, Stevie.

    We haven't received your message as of yet. Could you please send us an email (hema-maxim at mail dot ru) so that we can supply you with required files link or add us on Skype?

    Regards.

    • 2 tahun yang lalu
    1. HemaMaximDesign
      HemaMaximDesign
      • 2 tahun yang lalu

      We haven't yet.

      Once again, our Skype is hema-maxim

      It is a pity Freelancer doeasn't offer private messaging for contest holders and designers.
      We already have an uploaded file ready for delivery for the past 2 days. If you are unable to Skype us use one of the links from our profile or send us an email to which we will reply with the link.

      • 2 tahun yang lalu
    2. HemaMaximDesign
      HemaMaximDesign
      • 2 tahun yang lalu

      Additionally, you can try add us to your contacts on Freelancer, our ID is HemaMaximDesign, we tried adding you but Freelancer doensn't register your ID as searchable for us.

      Hope that helps.
      Regards.

      • 2 tahun yang lalu
  • stevie504
    Pemegang Peraduan
    • 2 tahun yang lalu

    I sent you a skype message

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Revisions ready, but we have a problem. Due to the fact contest was closed, we cannot upload new files and cannot send you a PM.

    Can you please add us on our Skype (hema-maxim) or give us your email address or add us to Freelancer contacts (we're new here so aren't sure how this works) so that we can send you revised images?

    Cheers.

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    No problem, your request is queued and will be processed by our Designers :)

    Regards. HEMA-MAXIM Team.

    • 2 tahun yang lalu
  • stevie504
    Pemegang Peraduan
    • 2 tahun yang lalu

    The one in ACT format and the png image. Based on the apple logo (approximately 46mm heigh by 38mm wide) Fitting in the glow part of the shoe like we discussed before. Thanks,

    • 2 tahun yang lalu
  • stevie504
    Pemegang Peraduan
    • 2 tahun yang lalu

    You are welcome. You earned it. Will you be able to give me the two resized files?Thanks

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Thank you for the heartwarming review, Stevie :)

    - HEMA-MAXIM Team.

    • 2 tahun yang lalu
  • stevie504
    Pemegang Peraduan
    • 2 tahun yang lalu

    Hey, Thanks again for the files. I am excited to move on to the next step in getting this decal printed. I did some research regarding size. The apple logo is approximately 46mm heigh by 38mm wide. When I printed out the shoe png file it was way to big. Is it possible for you to please resize the png to have the bottom humps in the apple fit right inside of the parts of the shoe that needs to light up? Thanks,

    • 2 tahun yang lalu
    1. stevie504
      Pemegang Peraduan
      • 2 tahun yang lalu

      Can you resize the png based on the apple logo please?

      • 2 tahun yang lalu
    2. stevie504
      Pemegang Peraduan
      • 2 tahun yang lalu

      Also the one is in ACT format. Im sorry if I am asking to many questions or request.

      • 2 tahun yang lalu
  • stevie504
    Pemegang Peraduan
    • 2 tahun yang lalu

    You also said you would include the color codes for the design. Which file would I find this? I just want to give the printer the best files to work with. Thanks again,

    • 2 tahun yang lalu
    1. HemaMaximDesign
      HemaMaximDesign
      • 2 tahun yang lalu

      Indeed. We included two files - Color Swatches (as requested) in ACT format, this can be imported in editor software, and simple image with colors as a pallete (you can either extract with printer software or pick colors with color picker).

      There are also plenty of online apps where you can just drag the image we provided in and get exact color codes out.

      • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Also, feel free to once you print the stickers, snap some photos and send us samples, we'd like to see the outcome and may add them into our portfolio :)

    • 2 tahun yang lalu
    1. stevie504
      Pemegang Peraduan
      • 2 tahun yang lalu

      Yes, I sure will. Are you able to resize for me? Thanks,

      • 2 tahun yang lalu
    2. HemaMaximDesign
      HemaMaximDesign
      • 2 tahun yang lalu

      Yes, can you please which image file should we resize?

      • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Once again thanks for the award. It's been fun to work on this one.
    Feel free to contact us if you need the 2nd design done and/or any revisions with the 1st design.

    All the best.
    HEMA-MAXIM Team.

    • 2 tahun yang lalu
  • stevie504
    Pemegang Peraduan
    • 2 tahun yang lalu

    Thanks. I would like to focus on the design you just sent me. I will save design two for a later date. So lets close out this deal. I am going to do some print outs and measurements tomorrow. Monday, I will begin contacting printers. Thanks again

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Deliverables sent.

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Hope this answers all of your questions.

    Cheers. HEMA-MAXIM Team.

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    We do have a portfolio but our international HEMA-MAXIM branch was rebranded only recently thus our portfolio is limited, not to mention that we work for well known clients who offen like an NDA signed and forbid content share, thus we canno't demo you all we can do, however with over a decade of experience we are capable of designing almost everything. The best would be to contact us with all required details and see if we can help you. You can always count on us in the future for your future projects.

    While our Design Team used to design and animate 3D elements (even some CGI intros) we no longer participate in this kind of work as it is time consuming and doesn't pay up to our standards. With that being said, if you are seeking some minor 3D work we may be able to still do it, but a more complex 3D design by our Design Team is no longer a go.

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Hi again, Stevie.

    Thanks for awarding us the contest. Our Design Team will prepare first deliverables tomorrow morning (GMT+3/4) and deliver them to you. We will leave the contest open until then as we will also work on the 2nd design for you so that you can adjust awarding parameters as mentioned before.

    Sure we can adapt the 2nd design. But we have to note that both designs strongly depend on printing done. Using quality ink and paper is a must for best effect. When it comes for 2nd design, if you really want the green glow (luminescence) there are printing stores that can print this chemical, if you can't find one you can buy appropriate chemical for printing and paint it yourself over the print we will deliver.

    • 2 tahun yang lalu
  • stevie504
    Pemegang Peraduan
    • 2 tahun yang lalu

    One more question: Do you do 3d modeling? I currently have a few contest up you may be interested in. Thanks

    • 2 tahun yang lalu
  • stevie504
    Pemegang Peraduan
    • 2 tahun yang lalu

    Regarding the 2nd design: Yes, it is the black with green nike glow. The green part should glow. This may be harder for the printer to pull off. I am really just wondering how it would look. I think I will work on this design first. I want to make sure I can find a good printer to pull off this effect. Once I do that, we can work on other designs.

    • 2 tahun yang lalu
  • stevie504
    Pemegang Peraduan
    • 2 tahun yang lalu

    Thanks for the printing tips. You all are great! Btw: Do you have a port so I can see what design work you all do best? You already have my future business for the decals.

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Regarding the additional design, is it the black with green glow Nike shoe?

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    If you have more complex projects you'd like us to work on, feel free to create a job post and invite us, it would be much easier for both parties to address your project faster and provide accurate revisions.

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Regarding the additional work, sure we can do it, it's always fun to do Design :) Just make sure all required details are provided.

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Either way we're glad you like our entries. Of course you can buy them all, in delivery (final) we would deliver all included versions above, some mockup images, print-ready rasters and vectors as well as some variations (if you need to) and color swatches used (for printing) regarding the sticker printing process itself, we cannot tell for sure, you'll have to see with the company that will print them for you, best way to get it right is measure the apple logo on your Macbook and calculate proportions, after we deliver the prints print them on regular paper in different sizes then see what fits best and print that as a sticker. Keep in mind that some companies cannot print transparent stickers (semi transparent blue needed for the glowy eyes) so make sure you ask the right company.

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Thanks for the update. We haven't received them, must be something with Freelancer.

    • 2 tahun yang lalu
  • stevie504
    Pemegang Peraduan
    • 2 tahun yang lalu

    Hey, I did. Here it is: I want to buy this design from you. This is my first time going through this process of decal production. Can you include the color codes and all necessary formats that the printer would need. I know the bottom color will be very important to get the right glow effect. In the future, will you be willing to make slight changes in the design for production needs. I like your work and would like to work with you in the future on some other projects. Also, I have one other design concept. can you make a mock up. if it looks good i will add another $20 to the contest and buy both designs. I am adding the reference images to the brief

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Stevie, have you sent us a message? We received email notifications but no actual messages appear on our Freelancer.

    Regards.

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Basically the design is set, should you award us the contest we can then output all the above demonstrated prints including revisions should you have any. You can then choose which ones to print and use. Ultimately the quality of the design will depend highly on sticker print quality.

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    We're glad you like our entries :)

    • 2 tahun yang lalu
  • stevie504
    Pemegang Peraduan
    • 2 tahun yang lalu

    Hey, This is getting better and better!

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    We uploaded 3 more entries, this time with more color and made the glow parts semi-transparent.

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    As soon you clarify which parts are to be changed exactly we will up new mockups creens.

    Cheers.

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Of course, would you like the Swoosh (checkmark from Nike) and the letter M removed? It can all be done easily.

    We'd recommend that the glow part is made semi transparent and that the sticker covers the whole Apple logo, but this strongly depends to the company/firm that will produce the print designs. If we made the glow parts semi transparent and bluish as you mentioned only these two parts would glow and would achieve much better effect than as your drawing suggested (which we followed)

    • 2 tahun yang lalu
  • stevie504
    Pemegang Peraduan
    • 2 tahun yang lalu

    The idea of placing this area of the shoe over the apple light is to create a glow like the shoe has in real life. The real life glow is a bluish color. (see mock up) I wonder if it is possible if the designer creates a slight tint of blue in that area so the white apple light shines through and creates a blueish glow. Too match the glow, the shoe may need to be a bit darker in color and perhaps a bit of more detail in the overall shoe design. Thanks to all who submit!

    • 2 tahun yang lalu
  • stevie504
    Pemegang Peraduan
    • 2 tahun yang lalu

    Thanks for your entry. I am happy my contest caught your eye! I like your design. Is it possible to remove the nike check? Don't want a dirty letter from nike. lol

    • 2 tahun yang lalu
  • HemaMaximDesign
    HemaMaximDesign
    • 2 tahun yang lalu

    Greetings.

    We don't usually attend contests but yours caught out attention. The supplied mockup samples contain a print that is in vector AI and EPS as well as print-ready HD raster outputs.
    We can alter colors and or parts on request.

    If you like our entry feel free to finalize, and we'll send you all required data.
    Kind Regards. HEMA-MAXIM Team.

    • 2 tahun yang lalu

Tunjukkan lebih banyak komen

Bagaimana mula dengan peraduan

  • Papar peraduan anda

    Papar Peraduan Anda Cepat dan senang

  • Dapatkan bertan-tan penyertaan

    Dapatkan Bertan-tan Penyertaan Dari seluruh dunia

  • Anugerahkan penyertaan terbaik

    Anugerahkan penyertaan terbaik Muat turun fail-fail - Senang!

Papar Peraduan Sekarang atau Sertai kami Hari Ini!