Project of 3 grave lights - Projekt trzech zniczy

  • Status: Closed
  • Hadiah: $1329
  • Penyertaan Diterima: 346
  • Pemenang: cesarchacondi

Ringkasan Peraduan

Project of 3 grave lights – glass containers (small version) including plastic part of the bottom and the top.

Good morning,

According to the subject, we are looking for the Designers, who will be able to prepare for us the project of three complete grave lights consists of glass container and plastic bottom and the top. We are looking for the modern projects according to the current trends. In attachements you will find the models of the top and the bottom parts of the grave light – these are the standards to which the project and the plastic elements should be adjusted. Before the proces of 3D modeling you can send us your idea as a drawing/sketch just to show the plan. Below are the additional info regarding the grave light:

Main guidelines:
- the height of the glass part – 180 mm
- the height of the grave Light including the plastic parts of bottom and the top – max 260 mm
- max size – view from the top – 80 mm

If you need more info, please contact.

=============================================================================================

PROJEKT TRZECH ZNICZY - POJEMNIKÓW SZKLANYCH (MAŁYCH) WRAZ Z PLASTIKOWĄ PODSTAWKĄ I DEKLEM.

Dzień dobry!
Zgodnie z tytułem konkursu, poszukujemy osoby, która wykona dla nas projekt trzech kompletnych zniczy składających się z pojemnika szklanego oraz plastikowej podstawki i dekla. Szukamy projektów nowoczesnych wpisujących się w obecne trendy.
Dołączamy również modele góry oraz spodu pojemnika, są to standardy, do których należy dostosować projekt i plastikowe elementy.
Przed rozpoczęciem modelowania 3D można przedstawić projekt w postaci szkicu. Poniżej znajdują się dodatkowe informacje dotyczące pojemnika.

Główne cechy:
- Wysokość pojemnika szklanego 180mm
- Wysokość całego znicza z podstawką i deklem max 260mm
- Wymiar maksymalny patrząc od góry nie może przekroczyć 80mm

W razie jakichkolwiek pytań pozostaję do dyspozycji.
Pozdrawiam i życzę powodzenia.

Kemahiran Disyorkan

Papan Penjelasan Umum

  • QUADROSTUDIO
    QUADROSTUDIO
    • 2 bulan yang lalu

    I'm a fool because I followed the requirements until the winning project didn't comply. I'm not going to comment on whether the winning design is modern, because that's not entirely objective. But there is no way that the winning project has an overall size of 80 mm (view from the top, written in the condition) and minimum size of the glass part of 76 mm (according to the drawing provided by the contest holder). The protruding glass part is also absolutely impossible to fit in the 80mm size. According to the terms of the competition, it is not possible to have such a wide bottom part. I have lost many contests and have not allowed myself to comment except when a design that does not meet the criteria is chosen. This leads to the situation where many of us have wasted our time. Because we could also make a wide bottom and a convex glass part if we knew that the conditions of the contest could be totally violated. My criticism is not to the winner, but to the contest holder.

    • 2 bulan yang lalu
    1. Ilmarcolino
      Ilmarcolino
      • 1 bulan yang lalu

      agree

      • 1 bulan yang lalu
  • nazmisevli
    nazmisevli
    • 1 bulan yang lalu

    Congratulations Caesar

    • 1 bulan yang lalu
  • Amr3d
    Amr3d
    • 1 bulan yang lalu

    Hello contest holder ,contact me please, thank you.

    • 1 bulan yang lalu
  • SergenKaan
    SergenKaan
    • 1 bulan yang lalu

    A very necessary and must-follow explanation that wastes almost everyone's time;
    **Main guidelines:
    - the height of the glass part – 180 mm
    - the height of the grave Light including the plastic parts of bottom and the top – max 260 mm
    - max size – view from the top – 80 mm **

    None of the liked entries are eligible, the winning entry is completely irrelevant...
    (I have no dissent towards the owner of the winning post, I'm just angry at the contest holder.)
    Congratulations Caesar...

    • 1 bulan yang lalu
  • Fanox
    Fanox
    • 2 bulan yang lalu

    there is some confusion.... First of all you asked for a modern design and classic designs get more stars. Second point, say you use your STEPS for plastic parts and those who don't use them get more stars. Third point, tell me to respect the 80mm diameter and 180mm height measurements for the glass and those who don't respect them get more stars.... It sounds like a waste of time or some smart move to get ideas for free by winning, look at the case , a "user from Poland".... I just want to see when he wins the competition what he has submitted and I'll be ready to apologize for my doubts on this last point!

    • 2 bulan yang lalu
    1. SergenKaan
      SergenKaan
      • 2 bulan yang lalu

      Agreed @Stefano P.
      I had almost the same thing with another contest and the result was as I expected.
      For the same reasons, after the first design I submitted, I decided not to work for this contest.
      I think that the award is so high that it is purely to attract attention.
      Waiting to see the result...

      • 2 bulan yang lalu
    2. marioorlando95
      marioorlando95
      • 2 bulan yang lalu

      Totally agree. I thought the same thing.

      • 2 bulan yang lalu
  • bibekanandaseth1
    bibekanandaseth1
    • 2 bulan yang lalu

    Hello sir please visit this link. https://drive.google.com/drive/folders/10ttFFvKXCiBaAn3jvoxONHEVRJlQnTwl?usp=share_link

    • 2 bulan yang lalu
  • ikramhasan640
    ikramhasan640
    • 2 bulan yang lalu

    #extended please

    • 2 bulan yang lalu
  • Vipuln932
    Vipuln932
    • 2 bulan yang lalu

    now i am deleting my entrys, hope any deserving candidate win this compititions, good luck.......

    • 2 bulan yang lalu
  • Adreyat08
    Adreyat08
    • 2 bulan yang lalu

    Check #388 Crystal Glass grave light model. Thank you.

    • 2 bulan yang lalu
  • ikramhasan640
    ikramhasan640
    • 2 bulan yang lalu

    I am working on your project, please extend the time by 1-2 days so that I can finish the work well.

    • 2 bulan yang lalu
  • mems2020
    mems2020
    • 2 bulan yang lalu

    Is it possible to open this contest for one day only or you can't?
    I hope you will do, so in order to share my work with you.
    thank you.

    • 2 bulan yang lalu
  • Vipuln932
    Vipuln932
    • 2 bulan yang lalu

    I am waiting for winner, who's entry is following products measurements..

    • 2 bulan yang lalu
  • ikramhasan640
    ikramhasan640
    • 2 bulan yang lalu

    I am working on your project, please extend the time by 1-2 days so that I can finish the work well.

    • 2 bulan yang lalu
  • mahmouddashraf94
    mahmouddashraf94
    • 2 bulan yang lalu

    kindlly find my last designs for this comp. i made NEW DESIGN ( OP 4) ENTRY #424 and my OLDEST DESIGN I THINK U DIDNT SEE IT ENTRY #411 #410 #409 AND ENTRY #183
    and MY FIRST SUBMIT ENTRY #62
    PLEASE FIND MY DESIGNS AND GIVE ME FEED BACK TO IMPROVE MY KNOWLAGE IF I DIDNT WIN CAUSE I DIDINT HAVE ANY COMMENT FROM U BEFOR AND I ASKED ALOT THANK YOU

    • 2 bulan yang lalu
  • ikramhasan640
    ikramhasan640
    • 2 bulan yang lalu

    #extended please

    • 2 bulan yang lalu
  • Ilmarcolino
    Ilmarcolino
    • 2 bulan yang lalu

    Yeah, my comment was not finished. sory. I only see good ratings for proposals that do not even use the step file or are not even modern. That is something strange. My suggestion: you will get better results from a contest if you give some kind of feedback. I understand this is a contest, but you are not being consistent in what you ask, and what you rate, makes me feel you are getting many ideas for free. Thats why my designs are withdrawn. Thank you for the oportunity!

    • 2 bulan yang lalu
    1. ZniczPlast
      Penganjur Peraduan
      • 2 bulan yang lalu

      I understand, maybe my description is not very clear, but I do not delete ideas even if they are not complete, because I can always ask for changes individually from each freelancer. Thank you for your comments, I will try to adapt to them in the future to achieve better results.

      • 2 bulan yang lalu
    2. IvanTsurkov
      IvanTsurkov
      • 2 bulan yang lalu

      I also withdrew all my bids due to the fact that most of the bids that were rated were either square or did not use the bid owner's file as "basic parts" and received the lowest score for their bids. It's kind of not right!! This is if I posted a competition and indicated that I need to come up with a new design for a three-wheeled car, but would I put high scores on four-wheeled cars?!?!?

      • 2 bulan yang lalu
  • IhorKozodoy
    IhorKozodoy
    • 2 bulan yang lalu

    Please check #390 #391 #392

    • 2 bulan yang lalu
  • Amr3d
    Amr3d
    • 2 bulan yang lalu

    Hello please give a feedback for #182 , or if you would contact me .thank you in advance.

    • 2 bulan yang lalu
  • Rileyphiles
    Rileyphiles
    • 2 bulan yang lalu

    I too asked for feedback on entry 225 but didn't get any. is this something that will be provided?

    • 2 bulan yang lalu
  • kalnienk
    kalnienk
    • 2 bulan yang lalu

    Would appreciate some feedback on #358

    • 2 bulan yang lalu
  • Vipuln932
    Vipuln932
    • 2 bulan yang lalu

    Entry #5 is better than #330 but that time you want measurements , but now I don't know what you are doing? It is impossible to know what you really want?

    • 2 bulan yang lalu
  • Adreyat08
    Adreyat08
    • 2 bulan yang lalu

    Hello dear CH. check update entries #347 I thought about some new models, what do you want to know? Looking forward to your feedback. Thank you.

    • 2 bulan yang lalu
  • cesarchacondi
    cesarchacondi
    • 2 bulan yang lalu

    Dear Contest holder:

    I see you liked some of my proposals ( #154 #160 #161 ) , and I would like to have some feedback, to see how can I improve them or maybe submit new ones based on your comments.

    Looking forward to hear from you.
    Thank you

    • 2 bulan yang lalu
    1. ZniczPlast
      Penganjur Peraduan
      • 2 bulan yang lalu

      I send you information on msg.

      • 2 bulan yang lalu
  • nazmisevli
    nazmisevli
    • 2 bulan yang lalu

    Is it the cover or the design that is missing? #338 #337 #341 #342

    • 2 bulan yang lalu
    1. nazmisevli
      nazmisevli
      • 2 bulan yang lalu

      I can't move forward as there is no verbal feedback.

      • 2 bulan yang lalu
    2. ZniczPlast
      Penganjur Peraduan
      • 2 bulan yang lalu

      please, check msg.

      • 2 bulan yang lalu
  • Fanox
    Fanox
    • 2 bulan yang lalu

    I open the bets.... I bet on @Techmipl as the winner!

    • 2 bulan yang lalu
    1. Vipuln932
      Vipuln932
      • 2 bulan yang lalu

      i also

      • 2 bulan yang lalu
    2. IvanTsurkov
      IvanTsurkov
      • 2 bulan yang lalu

      Looking forward to this masterpiece)

      • 2 bulan yang lalu
  • lawrence2design2
    lawrence2design2
    • 2 bulan yang lalu

    Hello, Could you review #290 , Regards.

    • 2 bulan yang lalu
  • milyaas77
    milyaas77
    • 2 bulan yang lalu

    Please check entry #322

    • 2 bulan yang lalu
  • pamakdipak6
    pamakdipak6
    • 2 bulan yang lalu

    Please check #319

    • 2 bulan yang lalu
  • IvanTsurkov
    IvanTsurkov
    • 2 bulan yang lalu

    Check out my new designs #317 #315 #312 #297

    • 2 bulan yang lalu
  • Thestylehauz
    Thestylehauz
    • 2 bulan yang lalu

    working on it

    • 2 bulan yang lalu
  • sriharivaila2000
    sriharivaila2000
    • 2 bulan yang lalu

    Hi client please explain about how the design is going to be manufactured on glass. It will be helpful to make for you to get the accurate work you want.

    • 2 bulan yang lalu
  • kathire
    kathire
    • 2 bulan yang lalu

    please check #273

    • 2 bulan yang lalu
  • riolaa15
    riolaa15
    • 2 bulan yang lalu

    Please check #262 , thank you

    • 2 bulan yang lalu
  • Ilmarcolino
    Ilmarcolino
    • 2 bulan yang lalu

    strange contest. Modern designs do not recieve any feedback

    • 2 bulan yang lalu
    1. sriharivaila2000
      sriharivaila2000
      • 2 bulan yang lalu

      How can we know that whether the design is manufacturable or not.

      • 2 bulan yang lalu
    2. Vipuln932
      Vipuln932
      • 2 bulan yang lalu

      i think you are right, i just waiting for who become winner, i try my all efforts but gets only two or three stars,

      • 2 bulan yang lalu
  • Fanox
    Fanox
    • 2 bulan yang lalu

    Moreover, it is not clear whether you want to use a candle or an electric/led light bulb.... if the first solution is the most suitable, your STEP files are not good, much less the many 3-star choices with the candle

    • 2 bulan yang lalu
    1. ZniczPlast
      Penganjur Peraduan
      • 2 bulan yang lalu

      We put both traditional and electric candles in the models. I expect complete works. Many models are nice, but impossible to make by the glassworks and our production.

      • 2 bulan yang lalu
  • riolaa15
    riolaa15
    • 2 bulan yang lalu

    Please check #208 , thank you

    • 2 bulan yang lalu
  • mahmouddashraf94
    mahmouddashraf94
    • 2 bulan yang lalu

    I ATTACHED 8 PHOTOS EVERY SINGLE MODEL HAVE TWO SHOOTS TO SHOW ALL DETAILS OF THE MODEL AND I PUT COLLECT PHOTO FOR ALL MODELS AND FINALLY THE SHOOT FROM 3D MAX TO DESCRIPE THE BODY OF EVERY MODEL PLEASE CHECK ALL PICTURES ENTRY #183

    • 2 bulan yang lalu

Tunjukkan lebih banyak komen

Bagaimana untuk mulakan dengan peraduan

  • Siarkan peraduan anda

    Siarkan Peraduan Anda Cepat dan mudah

  • Dapatkan berjuta penyertaan

    Dapatkan Bertan-tan Penyertaan Dari serata dunia

  • Anugerahkan penyertaan terbaik

    Anugerahkan penyertaan terbaik Muat turun fail - Mudah!

Siarkan Peraduan Sekarang atau Sertai kami Hari Ini!