Tapis

Carian terbaru saya
Tapis mengikut:
Bajet
hingga
hingga
hingga
Jenis
Kemahiran
Bahasa
    Status Pekerjaan
    1,802 lithium bms tugasan ditemui, harga dalam USD

    A Profile for a company that works in the field of medical equipment supply/installation/maintenance, civil works, mechanical works (HVAC, Pumps, etc...), and electrical installation (BMS, low current systems, MV/LV systems, etc..) and EPC/General Construction Contracts.

    $118 (Avg Bid)
    $118 Avg Bida
    64 bida

    The keywords are: can i use lithium batteries instead of alkaline Wordcount is: 1000 The link for instructions is: Guidelines - How to post: Guidelines - Question post:

    $15 (Avg Bid)
    $15 Avg Bida
    1 bida

    I am looking for a freelancer to create a Detailed Project Report focused on Lithium-ion Battery recycling. The report will primarily be targeted towards Government Agencies, investors. The ideal candidate will have experience in recycling and environmental impact studies. The report will specifically focus on the Sorting and Disassembly stage of the recycling process. Key deliverables of the project include: - An in-depth analysis of the environmental impact of Lithium-ion Battery recycling - Recommendations on best practices for Sorting and Disassembly - A detailed report of Lithium-ion Battery recycling The report should be presented in a clear and concise manner, using data and visual aids where appropriate.

    $78 (Avg Bid)
    $78 Avg Bida
    13 bida

    ...essential functions that enable polarization insensitive integrated photonic circuits. Although many efforts were dedicated to create adiabatic polarization manipulation devices on the silicon-on-insulator platform, a few were realized on the well-established lithium niobate material. The aim of this thesis is investigate the use of coupled mode theory to create efficient adiabatic polarization manipulation devices with minimal footprint. This work focuses in particular on the realization of adiabatic polarization beam splitters/rotators on the lithium niobate on insulator (LNOI) platform rib-loaded by silicon nitride (SiN) for telecommunications. Major contributions made by this project include the development of a design approach based on coupled mode theory that enables...

    $2863 (Avg Bid)
    $2863 Avg Bida
    15 bida

    ...electrical engineer to develop battery cell cycler test equipment that is dedicated to lithium-ion batteries. This specialized equipment will be able to perform charge and discharge testing, to ensure the highest quality product. The development of this equipment must use a combination of hardware and software tools. The ideal candidate will have extensive knowledge of the electrical engineering field, in regard to battery cells, and prior experience in developing such equipment. You must also be able to make modifications to the existing code and create custom software, as needed. A background in programming languages such as C++ and Python are highly desired. Develop and manufacture an 8-channel lithium-ion battery cell cycler test equipment with each channel able to ...

    $1150 (Avg Bid)
    $1150 Avg Bida
    14 bida

    CPU Environment: Arm Cortex M4 - Hope RF LORA6601 integrated CPU and LORA transceiver. Monitor 5 I/O pins - to determine if a switch contact is open or closed (this may be an analog resistance measurement - I will define threshold of open and closed in ohms) Closed is Good, open is alarm condition Contacts check 1/15 seconds, or allow a variable set during...temperature is over 75C once per 5 minutes - (this is a 'status ok' message) When alarm conditions occur (contact open or temperature >75C) alarm message sent. "pairing" prompt on power up or magnetic gauss sensor to send message for "Pairing" to a receiver. Message payload is 6bits - we have this defined. Device sends messages only 1650mAH battery - target 5 years life Power source 3V non rechargeable...

    $25 / hr (Avg Bid)
    $25 / hr Avg Bida
    19 bida

    Dear Mosab, Hope you are doing well. We have a project For iFAT for BMS in Yokogawa FAT area in Khobar, Thoqbah, KSA. for a period of 5 to 8 days. Please let me know if you are interested and let me have your rate all we need have approval of your CV, reference list, sample of report from our final you have any experience in this field? Waiting for your kind reply. Please let me have your provide us also your best daily rate for this

    $224 (Avg Bid)
    $224 Avg Bida
    1 bida

    Dear Mahmoud, Hope you are doing well. We have a project For iFAT for BMS in Yokogawa FAT area in Khobar, Thoqbah, KSA. for a period of 5 to 8 days. Please let me know if you are interested and let me have your rate all we need have approval of your CV, reference list, sample of report from our final you have any experience in this field? Waiting for your kind reply. Please let me have your provide us also your best daily rate for this

    $275 (Avg Bid)
    $275 Avg Bida
    1 bida

    Project Overview: Our company is seeking a skilled freelancer with expertise in Battery Management System (BMS), AC-DC conversion, IC microcontroller programming, circuit design, and PCB designing to design and build a studio light that runs on a lithium-ion battery. The light should be portable, easy to use, and capable of providing bright, high-quality illumination for indoor photography and videography. Key Deliverables: The successful freelancer will be responsible for the following: Design and development of a lithium-ion battery-powered studio light Integration of Battery Management System (BMS) to ensure safe and efficient use of the battery AC-DC conversion design and implementation for reliable and stable power supply to the light IC microcontroller ...

    $855 (Avg Bid)
    $855 Avg Bida
    4 bida

    Hello! Hope you are doing well. We have a project For iFAT for BMS in Yokogawa FAT area in Khobar , Thoqbah, KSA. for a period of 5 to 8 days. Please let me know if you are interested and let me have your rate all included. Also we need have approval of your CV and reference list from our final client. Do you have any experience in this field? Waiting for your kind reply. Please let me have your CV and reference list. Best regards Nafttech

    $627 (Avg Bid)
    $627 Avg Bida
    14 bida

    BMS SharePoint-based application into a solution that was to be based in SharePoint Online and be able to utilize tools within the Office 365 ecosystem. This solution begins with the Agenda Editor which is a C# .Net desktop application suite that allows users to create agendas with items and attachments that are then published into a SharePoint BMS database. This application is extensive and contains several projects within the Visual Studio solution. The two we focused on were eAgendaPro and eAP3Publisher. The solution files can be found the eAgenda folder in this repository. Once an agenda is published into SharePoint, the Snapshot Builder can be used to create the corresponding Agendas and Agenda Files for a selected publication that enables the use of the Agenda Viewer....

    $36 / hr (Avg Bid)
    Segera Perjanjian Kerahsiaan
    $36 / hr Avg Bida
    15 bida

    Dear Shahzad, Hope you are doing well. We have a project For iFAT for BMS in Yokogawa FAT area in Khobar , Thoqbah, KSA. for a period of 5 to 8 days. Please let me know if you are interested and let me have your rate all included. Also we need have approval of your CV and reference list from our final client. Do you have any experience in this field? Waiting for your kind reply. Please let me have your CV and reference list. We will discuss about the budget later. Best regards

    $8 (Avg Bid)
    $8 Avg Bida
    1 bida

    Working on a small lithium cell powered kitchen gadget that would need to have a higher torque curve and a 4-6 hour power life and be completely water proof. trying to develop a small but powerful slow turning mechanism that can turn over ingredients in a soup or chili

    $37 / hr (Avg Bid)
    Perjanjian Kerahsiaan
    $37 / hr Avg Bida
    5 bida
    Trophy icon Design 4 new product labels Tamat left

    Design 4 new labels for LoneStar Lithium Golf Cart Batteries Use the attached logo and key info from the box label attached. A Top Label Approximately 2 3/4" Tall x 5" Wide Drop In Lithium Golf Car Battery Top Label Requires The Following Warnings: Risk Of Fire Or Explosion Avoid Mechanical Shock WARNING Do Not: Short Circuit Crush Disassemble Incinerate Heat Above 140F Submerge In Water UN38.3 Recyclable Li-ion logo Do Not Throw In Garbage Logo Plaque #1 - Approximately 6' Tall x 8" Wide LoneStar Lithium 36 Volt 50 Amp Hour (1.85 KwH) NMC Lithium Battery A Single Drop In Battery Replaces A Set Of 6 Lead Acid 6 Volt Batteries In Older Club Car, E-Z-GO And Yamaha Stock Electric Golf Carts Lifted Carts, Upgrades Controllers Or Hi...

    $38 (Avg Bid)
    Dijamin
    $38
    58 penyertaan

    I would like to hire a freelancer to design a cooling system that dissipates heat from rechargeable batteries. MOFs, a metal foam material that absorbs water, wrap around lithium-ion batteries for electric vehicles. As the battery heats up, the water in the MOFs evaporates, taking the heat away and dissipating heat. The whole process is simulated by simulation software, and drawing a conclusion. Heat dissipation under different discharge power (3c and 5c) needs to be simulated. The Freelancer will be responsible for designing and implementing this system, using the evaporation principle to dissipate heat from the rechargeable battery. The Freelancer should have experience in designing cooling systems, and should be experienced with utilizing the evaporation principle. The relevant p...

    $187 (Avg Bid)
    $187 Avg Bida
    10 bida

    I am looking for a custom battery charger that is specifically designed for Lithium-Ion batteries. Additionally, no AC adapter is required and the charger won’t require a universal voltage input. The charger will be used to charge scooty and e-rickshaw batteries. I need someone who can design an effective, reliable and safe product which can serve our needs in the long run. For more details i am sharing my all charger requirement list, if you cna complete any of them then contact us. we need a sample piece for testing.

    $361 (Avg Bid)
    $361 Avg Bida
    7 bida

    Manufacturing charges for 2 and 6 channel BMS system

    $503 (Avg Bid)
    $503 Avg Bida
    1 bida

    Main specs: - 7-16s automa...build 100-200 boards at once. - bms data communication with Xiaomi/Ninebot family of scooters. As same as original bms from Xiaomi M365 battery. - settings or reading data via Android mobile apps such "m365Tools" or "PowerNine". (Google Play) - discharging 35A continuous, 60A peak, charging 6A - overload, shortcut and reverse polarity protection. - cca 50mA effective balancing current per bank - working with 3.6V Li-Ion and 3.2v LiFePO4 - 4 temperature measurement channels, 2x on pcb, 2x on cells - expected and guaranteed life of bms/components at least 2-3 years under standard working conditions. - full access to firmware settings and changes, create different versions (if necessary). Easy work with changes, adjustments...

    $278 - $835
    Dimeterai
    $278 - $835
    15 bida

    Background The future of transportation lies in EVs. Many firms are developing batteries to serve this market best. Almost all-electric and plug-in hybrid vehicles use lithium-ion batteries (LIBs). Despite much progress in battery development, some significant hurdles still exist and must be resolved. Long charging time is the main problem for EV adaptation. The US Department of Transportation reports that battery electric vehicles may be fully charged, using commonly home electric socket level 1 charger in 40–50 hours. Such a long battery charging time is a significant deterrent. Even high current level 3 DC chargers need 30 minutes to charge and require an infrastructure of specialized charging stations. Charging batteries at high currents is a hazard! Cars catching fire wh...

    $352 (Avg Bid)
    $352 Avg Bida
    22 bida

    Requirement of software development for cranking of electric bus using the existing hardware of Vehicle Control unit, BMS, Traction Control Unit, Electric vehicle charge controller, ECAS, ABS, and Cluster. Communication interface requirement is CAN 2.0 B following SAE J1939 protocol.

    $9183 (Avg Bid)
    $9183 Avg Bida
    3 bida

    About Tri-Mountain Recyling : We are a materials recover start up with a focus on the reuse and recycling of lithium batteries, solar panels, and electronics. Project Description: Looking for a design that incorporates three mountains offset from one another. (One in the forefront, two in the back) Each Mountain would be a different color (thinking blue for electronics, darker yellow for solar, purple, green, open to discuss). Each mountain is snow capped. Some texture on each mountain to make it realistic but with a minimalist design.

    $229 (Avg Bid)
    $229 Avg Bida
    69 bida

    Connect an lcd display to a esp32, and a vs1053 board along with a lithium battery for a project. I also need appropiate code so that the esp32 can communicate with the display properly, and a system by which the vs1053 can send audio to an app. The app will analyze the audio and send back results to the esp32 and the display more details can be given. I can provide and send materials for the project. I already have a display, a battery, the esp32, the vs1053, and some connectors. Anything else I can buy, as long as it's relatively inexpensive. All I need is a functioning prototype and a possible cad design of the final device.

    $277 (Avg Bid)
    Segera Perjanjian Kerahsiaan
    $277 Avg Bida
    7 bida

    BMS SharePoint-based application into a solution that was to be based in SharePoint Online and be able to utilize tools within the Office 365 ecosystem. This solution begins with the Agenda Editor which is a C# .Net desktop application suite that allows users to create agendas with items and attachments that are then published into a SharePoint BMS database. This application is extensive and contains several projects within the Visual Studio solution. The two we focused on were eAgendaPro and eAP3Publisher. Once an agenda is published into SharePoint, the Snapshot Builder can be used to create the corresponding Agendas and Agenda Files for a selected publication that enables the use of the Agenda Viewer. The Snapshot Builder is an SPFx SharePoint webpart. The Agenda View...

    $25 - $50 / hr
    Ditampilkan Dimeterai Perjanjian Kerahsiaan
    $25 - $50 / hr
    34 bida

    We have PHILIPS 4ICR19/65-3 Battery. I need someone with good experience in BMS , Because the original BMS is not giving the output voltage. the internal battery pictures will be send in chat. link

    $35 (Avg Bid)
    $35 Avg Bida
    3 bida

    For optimal performance, the UPS requires an input power of 12V DC and an output power of 12V DC. It is capable of supporting a 2-3 amp load without delay or interruptions when the main power source is switched off or on. Additional...optimal performance, the UPS requires an input power of 12V DC and an output power of 12V DC. It is capable of supporting a 2-3 amp load without delay or interruptions when the main power source is switched off or on. Additionally, while operating on the main power supply, the UPS should simultaneously provide power to the load and charge the lithium-ion batteries. The circuit board must include a battery management system (BMS) to protect the 3S lithium-ion battery pack, including short circuit protection. Performance, reliability, and ...

    $92 (Avg Bid)
    $92 Avg Bida
    17 bida

    DISCLAIMER // DO NOT BID if you have no past experience with this ICs // Hi, I have designed and built a battery pack for a device, which includes a 2-S 32Wh Lion prismatic cell pack, an integrated BMS (BQ40Z50-R2), but unfortunately I have underestimated the difficulties in setting up the BMS due to the large number of required settings. I have built on prototype of the device (Rev1.0), and the BMS is responding to commands sent on the SMBUS. However, the BQ40Z50-R2 is not activating the charge and discharge FETs due to what I believe to be incorrect configuration (since the commands are rejected). I have the urgency to confirm that there are no issues with the schematic design and my only way to do so is to get the BQ40Z50 programmed with the minimum required to...

    $98 (Avg Bid)
    $98 Avg Bida
    4 bida
    Trophy icon Cricket Bat Stickers Tamat left

    I need designs for cricket bat stickers using the logos attached for the design. the front can only have graphics up high towards the handle(top third), the back of the bat can have graphics all over, and the sides can have graphics, would like to use the below as options 1-8 in colour schemes, best entry c...graphics, would like to use the below as options 1-8 in colour schemes, best entry can then work on all 8 designs at further charge. each will have the word MAGNIUM, then the colour options and then a spark word 1/ Magnium Black carbon 2/ Magnum Green element Active power, Geo 3/ Magnium Red plasma, plasmic, fluid 4/ Magnium gold aurum, geolo, gold rush 5/ Magnium magenta purple/red 6/ Magnium lithium pink/fushia 7/ Magnium magnesium brilliant white/silver 8/ Magnium vanadium s...

    $138 (Avg Bid)
    Ditampilkan Dijamin
    $138
    80 penyertaan

    write source or help trouble shoot using debugging tools our existing code. C (Arduino IDE) but prefer to use Atmel Studio Using ATmega328 or ATMega168P QFP CPU Monitor 5 I/O pins - to determine if a switch contact is open or closed Closed is Good, open is alarm condition Also use A/D to drive an LM84T temperature sensor and measure once per minute Alarm condition ...When alarm conditions occur (contact open or temperature >75C) alarm message sent. Message payload is 6bits - we have this defined. Device sends messages only 1650mAH battery - target 5 years life We have this all working but there is a bug causing CPU hand and battery drain. considering fresh start as back up while we continue to troubleshoot the code we have. Power source 3V non rechargeable lithium battery or Thi...

    $27 / hr (Avg Bid)
    $27 / hr Avg Bida
    22 bida

    Minimalistic design stickers for Solar Inverter and Lithium Batteries. Dimensions, samples, Logos, colours and fonts will be provided.

    $16 (Avg Bid)
    $16 Avg Bida
    33 bida

    Sila Dafter atau Log masuk untuk melihat butiran.

    Ditampilkan Dimeterai Perjanjian Kerahsiaan

    link, title , price , Product Details ,Specifications , brand , image , catalogy ............ input link for scraping For example : Need code that can open input links from text files, to be able to scrape multiple links at once! use proxy and api proxy - api proxy - proxy ip:port , ip:proxy:user:pass / please add a question do you want to use proxy(1) or api-proxywq(2) or not use proxy(3) ? / please

    $218 (Avg Bid)
    $218 Avg Bida
    16 bida

    FoxBMS 2 - You have to develop 3 BMS using the OS framework FoxBMS 2 for the provided configurations: 1P2S - using Molicel P28A 4P6S - using P45B 7P14S - using P45B (Maybe 1 BMS for these 2 will be sufficient) Project includes: - Come up with feature suggestions like cell level monitoring, etc - End to end implementation along with board schematics, support multiple controllers(MCs) based on the requirements and availability - Debug and fix issues in hardware in the final stages in minimum iterations (hopefully 0 with foxbms 2) - Take care of heat sync design for the 4P6S and 7P14S Hardware testing will take time and milestones will be created accordingly.

    $423 (Avg Bid)
    $423 Avg Bida
    7 bida

    Hello Freelancer, We need your help. Please find three alternatives to the following Andersen EURO-320 connectors(see Link) The specs we are looking for are below: Specs: • Voltage: 24-85V • Current: > 350A • Dimensions: +/- 20%, Length 130mm, Heigh = 33mm, width = 83mm Application: • Lithium Battery connectors Features: • Connectors will work with 4/0 AWG cable • Wire contacts are plated with a metal such as tin or silver etc. • Mating cycles: greater than 10000 mating cycles • Mechanical keys mouled into the connectors to assure only connectors of the same colour will name • Terminal Connectors are round(not rectangular); see link attached for example of round connector: â—‹ Good Example of round connector:

    $88 (Avg Bid)
    $88 Avg Bida
    18 bida

    Thermal model of Lithium ion battery for electric vehicle in openmodelica.

    $154 (Avg Bid)
    $154 Avg Bida
    30 bida

    ...to the /api/refresh endpoint, but the backend sends a 403 response. The relevant code that adds the refresh route to the backend is included in this file. The frontend code sends the refresh request to the /api/refresh endpoint, but the backend sends a 403 response. The relevant code that adds the refresh route to the backend is included in this file. If this file is removed, the route disappears from the strapi backend. The backend expects a refreshToken in a cookie. However, it does not send a cookie request in the response. The problem must be debugged with breakpoints. Without breakpoints it becomes difficult. If you are familiar with such things, this could be interesting

    $46 (Avg Bid)
    $46 Avg Bida
    4 bida

    Hello - I am looking for someone who has dangerous goods experience in transportation to give a brief overview on a virtual seminar of some dangerous goods requirements, rules and regs, nothing deep, more of an overview and shallow dive into SP961 +962, a couple of UN numbers and maybe some q+a on lithium ion batteries

    $1660 (Avg Bid)
    $1660 Avg Bida
    33 bida

    the simulink model should contain a ev model powered using a lithium battery. the ev model values must be a replica of real world ev (any ev car). and analysis of battery must include all parameters like voltage,current, soc, range estimation, battery aging ,temperature affecting factors and etc. Also while charging a battery the same parameters how it varies must be show. The same must be compared with different drive cycle.

    $104 (Avg Bid)
    $104 Avg Bida
    9 bida

    Sila Dafter atau Log masuk untuk melihat butiran.

    Segera Dimeterai Perjanjian Kerahsiaan

    I am currently developing a battery powered DC variable power supply and I need a PCB created to control it. I would need it to have a buck boost ci...limiting digitally through the menu. I also will be using a TFT LCD to display a menu & to show voltages & current draw, so using an STM32 to drive & control all the logic would be preferable. Im not sure which batteries would be best to use in this so achieve the desired power outputs that I want so perhaps you may have some suggestions for batteries but for whichever batteries it would need a BMS and all protections as well with a USB C recharging circuit for recharging it & finally a power switch to disconnect the battery to the input to turn the device on & off. I attached the case I developed for it to give y...

    $334 (Avg Bid)
    $334 Avg Bida
    23 bida

    NAME - BAGALA MINING Mining Company Based in Congo DRC. Require a Corporate Logo company specialises in Metals (Gold, Diamonds, Copper, Lithium etc) Colour themes - Blue thankyou

    $13 (Avg Bid)
    Dijamin
    $13
    354 penyertaan

    En este caso estamos precisando modelar un auto de Formula E Gen3, listo como para Assetto Corsa. Yo tengo un modelo que te voy a subir que puede servir bien de referencia pero que le faltan muchos detalles. 1

    $1500 (Avg Bid)
    $1500 Avg Bida
    1 bida

    We are looking for an expert who is familiar with Modbus and knows how to read data parameters from Lithium battery. We want use Raspberry Pi to communicate with the Li battery through RS485.

    $175 (Avg Bid)
    $175 Avg Bida
    16 bida

    Hola Dani, como estas? En este caso estamos precisando modelar un auto de Formula E Gen3, listo como para Assetto Corsa. Yo tengo un modelo que te voy a subir que puede servir bien de referencia pero que le faltan muchos detalles.

    $1500 (Avg Bid)
    $1500 Avg Bida
    1 bida
    Trophy icon Business Plan Tamat left

    Business plan on Establishment Of Lithium Ore Separation Factory. It will be presented to the Bank To Attract Loan From the bank.

    $190 (Avg Bid)
    Dijamin
    $190
    51 penyertaan

    Thermal and Electrical Modeling of Lithium Ion battery for Electrical vehicles using Matlab and Openmodelica.

    $531 (Avg Bid)
    $531 Avg Bida
    31 bida

    We are looking for individual that are able to carry out BMS (building management System) installation, testing and commissioning in Europe but most importantly in Hungary. The following skillset is considered as an asset: - Technical understand of devices from datasheets (HVAC system, pumps, chillers) - Troubleshooting skills in plantrooms Project details and training to be further explained over a meeting

    $17 / hr (Avg Bid)
    $17 / hr Avg Bida
    3 bida

    We are looking for individual that are able to carry out BMS (building management System) installation, testing and commissioning in Europe but most importantly in Hungary. The following skillset is considered as an asset: - Technical understand of devices from datasheets (HVAC system, pumps, chillers) - Troubleshooting skills in plantrooms Project details and training to be further explained over a meeting

    $6 - $13 / hr
    $6 - $13 / hr
    0 bida