# Matlab project control jobs

...dynamics of composite plate with piezo layers using third order theory for active vibration **control** .... LQR and PID **control**... for formulation method u can see paper that i will sent you.. vibration response of plate with pzt layers and then **control** are two objectives... use comments for every activity so that i can understand code and

Problem Design a full-state, gain feedback controller using pole placement to change the damping ratios and natural frequencies for the longitudinal equations for the example aircraft: 1. Form the state space model (Alon, Blon,Clon,Dlon) for the longitudinal equations:

...of required freelancers:
Proficient in Electrical **Control** System, **MATLAB**.
**Project** 1:
Current and voltage loop based single phase inverter design.
Input DC Voltage 400V.
Output AC Voltage 230 V 60Hz.
Need current and voltage loop **control** to maintain output power factor approximately equals 1.
**Project** 2:
MPPT based step up chopper.
250 W DC input.
Output

Design and **control** of a multi-link robot system -
This **project** aims to design a multi-link robot and a **control** system such that the robot can be controlled to finish a given task, for example, to pick up an object located at a given point and move it to a specified area, or automatically detect the object and the specified

...experience on controller design and stability analysis.
I need someone to develp a **matlab** simulink model for a DC microgrid using hierrarchical droop **control** methods. The **project** is partially started (with componnets of the microgrid already designed in **Matlab** simulink). I would need an expert experience to do the design and implemenation of the

Ok, I have this **project** which requires a **MATLAB** Simulation of an aircraft releasing fuel tanks in flight. The aircraft will need to automatically **control** itself to remain stable when a weight is dropped from either wing. I have the aircraft code and data which you could use or you could do your own thing? Either way I need a simulation that demonstrates

Ok, I have this **project** which requires a **MATLAB** Simulation of an aircraft releasing fuel tanks in flight. The aircraft will need to automatically **control** itself to remain stable when a weight is dropped from either wing. I have the aircraft code and data which you could use or you could do your own thing? Either way I need a simulation that demonstrates

Its the **project** about voltage and power factor **control** of a Isolated system using **MATLAB**.
In this **project** we have utilized semiconductor devices to make an efficient **control** of 3-phase
voltage. Our objective is to make a close loop controller which can track the desired voltage
level (Specified by the user or the Appliance rating) from the fixed supply

...the **project** is to create a fuzzy PID controller under STEP7, object of regulation in **Matlab** / simulink. The problem itself is to write fuzzy controller using Step7. I want use **Matlab** ->OPC->STEP7(FuzzyPID)->OPC->SCADA. but due to lack of knowledge can not apply this LAD or ST algorithm.
I have a model in **Matlab**, with disturbance and PID **control**, I...

Can you create fuzzy controller based on the model in **Matlab** The CNC servo system ? You need to create a controller for servo system computer numerical **control**. I want to use as a **control** object object numerical **control** machines in **Matlab** and connected to a PLC across the OPC. I know how to create OPC. Problem: In the case of PLC with PID regulator

The **project** will need a freelancer that is expert on **Control** system and to be able to use **matLAB** software and simulink, for more information please message me.

The **project** will need a freelancer that is expert on **Control** system and to be able to use **matLAB** software and simulink, for more information please message me.

You need to create a controller for servo system computer numerical **control**. I want to use as a **control** object object numerical **control** machines in **Matlab** and connected to a PLC across the OPC. I know how to create OPC. Problem: In the case of PLC with PID regulator CNC model has a built-in PID controller in Siemens, but a fuzzy controller Siemens Step7

...stl, ladder - does not really matter. The essence of the **project** is to create a fuzzy PID controller under STEP7, object of regulation in **Matlab** / simulink.
The problem itself is to write fuzzy controller using Step7.
You only need to write a fuzzy controller for Step7.
I want use **Matlab**(object) ->OPC->STEP7(FuzzyPID)->OPC->SCADA.
All literature

Hi ,
The propose of **project** is to implement a **control** algorithm for a robot arm using only camera data as input to guide robot arm motion.
Potential applications of this technique include parts assembly or surface inspection in automated manufacturing environment.
The object or part can be simplified to a single coloured ball or cube for grasping

This **project** is all about **control** system. In this **project** you have to solve it numerically as well as on **matlab**. **Project** is simple.
Step1: To linearize a non linear system
Step 2: Find equilibrium point. .( Find Xeq & Ueq) If you are not able to find assume 1 equilibrium point (Ueq)as 0.
Step 3: Find state space matrices. (A, B, C, D)
Step

I need a **Matlab** expert in **control** system field.I need urgently .I have a **project** and you have to finish it today within [login to view URL]

Full **project** description is available in the attachment. Please don't bid if you haven't read the attachment.
Context
My stock broker has a web based trading platform using ActiveX **control**.
The trading platform shows live streaming stock and trading data on the webpage.
Objective
I need someone who can understand the ActiveX and write software

...description;
**Project** related to sensors (LVTD, Inductive Proximity sensors, RTD, LVDT, RVDT, Potentiometer, Optical Encoder, Mutual-induction proximity sensor Resolver Synchro transformer Self-induction transducers …………..)
The **project** shall be designed to give more than one way to meet the problem requirements and to design and instrument a **contr**...

I am working on a **project** that deals heavily with advanced linear **control** systems, dynamical modeling, and controller design. I need someone who is knowledgeable in these areas. Knowledge in using **MATLAB**/SISO Tool/SIMULINK is helpful as well. It is a small **project**, and it should not take more than a few hours or a day at most.

i need to 3 main case:
- **matlab** code for IEEE 30 bus with 5 DGs(Distributed Generation)
- **matlab** code for fuzzy logic which is needed for creating data that i need for Training and testing of Artificial Neural Network(ANN), however i already created that i will send you my M-File for Fuzzy Inference System(FIs)
- link of 2 mentioned M-Files for

the aim of this **project** is to apply the motion planning algorithm for car-like model instead of using unicycle robot.
1. the result should be as follow:
a. the result of the algorithm without any obstacle.
b. the result of the algorithm if there is only one obstacle.
c. the result of the algorithm with different obstacle configuration.
2. you

UAV air traffic **control**
- UAV can fly from point to point via input coordinates
- UAV can be overwrite by manual **control** by input voice recognition (i.e. turn right heading 090)
- UAV live feedback to a radar(screen) in a form of radar plot, using gps to send the location of the gps and show on a radar. The radar plot of the UAV moves when the

The work for this **project** is a simulation on **Matlab** and has been completed. All that’s left is the dissertation of the **project**.
There are 7 files to upload.
I also have more research papers regarding this topic, which I can also give, but I think an easy google search can find some of them.
To give the idea of what wants to be done, please read:

Hi, I am an academic scientist. For a **project** we have recently had funded we are getting a small piece of equipment manufactured. This will be assembled using a custom-built PCB.
We have engaged a hardware manufacturer to manufacture the equipment, but need someone to write the firmware to **control** the device.
The unit will contain the following

...Automated **Control** system for [login to view URL] (interactive online game)
[login to view URL]
You have to write a one-page document on how you would approach building a program which would play slither.io.
Machine Leaning should be used.
No technical work involved only design concept is needed
1. Plan on high level what is needed for the **project** to succeed

The **project** will need a freelancer that is expert on **Control** system and to be able to use **matLAB** software and simulink, for more information please message me.

electrical power system with 4 synchronous generators operate with manual **control** mode (manual excitation ) all work simulate with **Matlab** Simulink .**project** will take 2-3 days only

...design – Building Automated **Control** system for [login to view URL] (interactive online game)
[login to view URL]
You have to write a one-page document on how you would approach building a program which would play slither.io.
No technical work involved only design concept is needed
1. Plan on high level what is needed for the **project** to succeed
a. Would

I have a **project** to be implemented using Flower Pollination Algorithm. This work involve smart grid. I want an experienced freelancer (Electrical Engineer or **Control** System Engineer) with excellent **matlab** skill to deliver on this task, Coding must be in Flower Pollination Algorithm Only. You have to guarantee accurate result upon accepting this task

hello, this **project** require a knowledge of **control** system which is a field of electrical engineering and also **matlab**, i will post a hand written solution of this **project** but every thing need to be done in **matlab**.

THE **Project** requires someone who knows in ( process engineering and controls ) using **Matlab** . not coding but ( using Simulink ) for someone who knows how to work with Simulink , this will be super easy where you only do the block diagram and graph the result for each controller or each system you have. i will attach a full description of the assignment

Need help with the mathematical model and **matlab** model of a flywheel energy storage system which will be incorporated into an Battery Electric vehicle (BEV) to recuperate energy lost through breaking.
The full **project** description is shown below:
**Project** Description:
Kinetic energy recovery systems (KERS) are now being considered to improve

Need help with the mathematical model and **matlab** model of a flywheel energy storage system which will be incorporated into an Battery Electric vehicle (BEV) to recuperate energy lost through breaking.
The full **project** description is shown below:
**Project** Description:
Kinetic energy recovery systems (KERS) are now being considered to improve

Hello
Very Urgently looking for **Matlab** programming expert that can work on small **project** today ie 21st June . In this **project**, i want you to open and run mapmakergui and design , test **matlab** **control** function to use robot motion and time only. Please check the attached file with complete details and screenshots of working. the deadline is 21st june

...main aim of the **project** is to obtain a position **control** of a overhead crane using **matlab**.
1. Pant model and the controller must be designed.
2. A report writing ( 60-80 pages) which include ( introduction, literature review(10-15 pages), main body of report, result, discussion etc).
The model which we are using for this **project** and the details

What work do you require?
**Project** name:
DC-DC ISO Converter Design and **Control** Design and Analysis
Enter some skills that relate to the **project**:
Electronic FormsElectronicsMatlab & MathematicaElectrical Engineering
Existing Description:
Analysis and Report of Converter Schematic with Proffessional Report
I need to design a voltage

i want to create a unity **project** where the user will be able to **control** the animation using program called **matlab**.
if you have experience in unity 3d and **matlab** please inform me. so we can discus more about the job and payment.

my **project** is a laboratory task ,it is the **control** system (in automatic **control**) of levitation of a ball using a water beam, it requires skills in **matlab** and design PID controlers,system identification ,the writing should be academic it is for a master thesis, and it should be all done in english (i have a little documentation and accurate description

In this **project**, a Hybrid AC/DC µG will be formulated that has an advantage to reduce multiple DC-AC-DC or AC-DC-AC conversions present in the standalone AC or DC µG. The µG consists of both AC and DC power networks that are connected together using bidirectional converters. The AC µG will be formulated using AC power generation sources, such as utility

The **project** is to design a boost converter circuit and analysis report, with high efficiencies. They need to have reasonably low costs of components for specification given. I need to design a voltage controller in PSim for 6 converters where the controller parameters are checked , analyze , tuned and chosen. **Matlab**, **Matlab** toolboxes and or simulink

The **project** is to design a boost converter circuit and analysis report, with high efficiencies. They need to have reasonably low costs of components for specification given. I need to design a voltage controller in PSim for 6 converters where the controller parameters are checked , analyze , tuned and chosen. **Matlab**, **Matlab** toolboxes and or simulink

the **project** talk about comparison between 6 programing languages on 5 factors
this is the languages :-
• C++
• Java
• Python
• Ruby
• **Matlab**
• PHP
this is the factors :-
• Names Bindings and Scopes
• Data Types
• Expression and Assignment statements
• **Control** structures
• Subprograms

...efficiency and meeting specifications (both should also be simulated for evaluation).
You should upload a written **project** report and a PowerPoint to present your design and results to the class
along with simulation files (Circuit and **MatLab** feedback)
Specifications:
ï‚· The car battery voltage can range from 10 to 15 volts and the system should maintain

...virtual keyboard using **matlab** gui and **control** it by voice (e.g direction **control** left, right,up,down) same as tv keyboard . also put shortcuts for **control** hardware (e.g "AC" shortcut for open ac) that the light will on in the arduino .i have the the code for **control**.
and i won't honest person that will complete my **project** perfectly ...

Write and explain about a **project** which involves Camera and **Matlab**.
1. You have excellent skills in :
A ) **MATLAB** & Simulink
B ) **Control** Systems
C ) Arduino
2. You have good technical writing skills as well for :
A) Report Writing
B) Technical Writing
C) Thesis Writing
3. You are hardworking and timely. Willing to get challenged by task

I have a **matlab** **project** in which i need some modification . It is based on wind-diesel-solar-battery hybrid power system I want to implement a **control** system which will on-off the power plants according to load demand.

I need to design a **control** system for a motor.

Hi Guys,
This **project** is about Automatic **Control** Lab.
In order to do the lab reports you have to do the **Matlab** first !! so you can make the report. Also, you have to do the report by following the format see the files for more info.
**Please Note
Not only I want to work with professional to do this **project** but also, I want a good writer to do