Plc jobs

Maple Systems PLC & HMI Programmer – Automated Filling Machine We are looking for an experienced PLC / Industrial Automation Programmer to program and configure a Maple Systems PLC/HMI control system for an automated production filling machine. Hardware The system will use: Maple Systems HMC4043A-M Maple Systems HMC3-M1210Y0201-V2 Digital industrial scale with RS-232 communication Filling valve/nozzle controlled by the PLC Start button Additional sensors and I/O as required Main Machine Operation The filling machine will operate based on the weight received from the scale. The PLC must continuously read the live weight from the scale through RS-232. The basic filling sequence will be: Operator places a container on the scale. Operator pr...

...escalate, and reconcile all design discrepancies between physical schematics and software implementations across three core architectural tiers: Tier 1 (Siemens PLC/Safety), Tier 2 (Python Edge Intelligence), and Tier 3 (Streamlit HMI/Simulation). 2. Detailed Technical Work Package Requirements Traceability Matrix (RTM): Build and maintain a 1:1 RTM mapping every physical field instrument, safety loop, and control tag on E&I drawings directly to software I/O addresses, Siemens TIA Portal watch tables, and Python edge protocol tags. Tier 1: Hardware & Safety Loop Validation: Reconcile physical rack layouts, terminal rail connections, and PLC card channel assignments (4–20 mA, RTD, Discrete I/O). Cross-examine hardwired E-Stop circuits, safety relays, and...

1. Project Overview & Objective The objective is to perform a rigorous peer review and technical validation of process P&IDs for a multi-component chemical processing and fluid handling skid prior to final CAD updates and fabrication release. The review ensures process safety, fluid mechanics integrity, correct sensor positioning, fun...sensor selection and positioning (e.g., inline chemical concentration sensors, pH probes, differential pressure transmitters, RTD probes, flow meters) to guarantee reliable sampling and zero air-entrainment. Verify actuated valve control loops, solenoid controls, and failsafe positions (Fail Closed, Fail Open, Fail Locked). Cross-reference instrument tagging, signal lines (hardwired vs. software/PLC link), and I/O mapping against the core C...

I need code development for a Beckhoff PLC to control an oven. The primary functionality required is temperature monitoring and recording. Key requirements: - Develop PLC program for oven temperature monitoring through visualizing the reading for 44 thermocouples on the HMI and recording the data every (15 seconds) - data recorded should include date-time of the patch start (patch start will be recognized through one digital input) - alarm to be raised through HMI if memory going to be full Ideal skills and experience: - Proficiency in Beckhoff PLC programming - Knowledge of temperature sensors and data logging Looking for a freelancer who can deliver accurate and reliable control code.

I need an intensive, hands-on programme that will bring my team fully up to speed with Siemens Desigo CC and the ABT Site tools we rely on for our Building Management System. We have a tight window—one to two weeks—and want to start as soon as possible. The training must walk us through: • complete system setup and configuration • deeper dives into automation, PLC integration, SCADA workflows and HVAC/BMS optimisation inside Desigo CC • practical use of ABT Site for controller programming and deployment I’m looking for real-world, lab-style sessions that use live or simulated hardware so we can practise creating graphics, alarms, trends, schedules and custom logic. By the end, each participant should be confident enough to commission a fresh site f...

R7FS5D37A3A01CFP See my side hardware ready Actually my project . Collect data from plc and push into cloud server The plc have rs232 port some plc ds485 port Protocol may be modbus or some plc own . We give all format and structure Total 10 type of plc See . The collected data from plc push i into 4 sec interval to 3 location Ip address At the same time 1. TCP Ip format 2 location 104 format Maximum tags 100 from plc From that 100 tags 15 tags only we push 104 format See the main key point on ur code the ec200 module always connect with network more details will be shared with potential freelancer

R7FS5D37A3A01CFP See my side hardware ready Actually my project . Collect data from plc and push into cloud server The plc have rs232 port some plc ds485 port Protocol may be modbus or some plc own . We give all format and structure Total 10 type of plc See . The collected data from plc push i into 4 sec interval to 3 location Ip address At the same time 1. TCP Ip format 2 location 104 format Maximum tags 100 from plc From that 100 tags 15 tags only we push 104 format See the main key point on ur code the ec200 module always connect with network more details will be shared with potential freelancer

Complete the software implementation, integration, testing, commissioning support and documentation for a pilot project. This is a deliverables-and-acceptance based scope rather than a request for isolated code snippets. The source design identifies a three-tier architecture: Tier 1 deterministic PLC control and safety permissives; Tier 2 Python edge intelligence, communications watchdog and audit pipeline; and Tier 3 Streamlit HMI, protocol configuration and PLC simulation / commissioning functions. The source also identifies TIA Portal hardware configuration, watch/force tables, diagnostic organisation blocks and gateway configuration as deployment requirements. The supplied pilot document should be treated as the current functional design basis, not as evidence that every...

...system. We will provide all necessary machine details, existing PLC/HMI program information, I/O details, process parameters, batch sequence, existing reports, and other technical information required for the project. The freelancer should have **strong practical experience in 21 CFR Part 11 compliance and pharmaceutical automation**, preferably with multiple projects completed from **requirement gathering through development, validation, commissioning, and final execution**. ### Scope of Work The freelancer will be responsible for recommending, developing, configuring, and implementing the complete software solution, including: * **Required software/platform** * Recommended technology/platform and architecture * PLC/HMI/SCADA/database integration, as applicable ...

...European design. That means every page must adopt IEC symbols, device tag structure, and drawing layout the reference file I will supply. Beyond simple redrawing, I expect an intelligent P8 project: device macros correctly placed, full part master data filled out, cable and wire numbers auto-generated, and all PLC addresses mapped. Please include inverter parameter sheets and a tidy terminal block overview so the shop floor can build straight from the print. Key deliverables • PLC I/O mapping embedded in the project • Inverter parameter documentation tied to each drive object • Terminal block layouts generated from the device navigator • Part list of components To help me gauge fit quickly, attach examples of past EPLAN or similar IEC conversion work...

**Freelance PLC Programmer Required – Mitsubishi FX5 CPU / GX Works3** We are looking for an **experienced PLC programmer (10–12+ years of hands-on experience)** with strong expertise in **Mitsubishi FX5 series PLCs and GX Works3 programming software**. **Project Background:** We previously supplied a **complete paint shop automation system for a client in South Africa**. One of the spray booths is currently facing an operational issue, and we require an experienced PLC programmer to troubleshoot and rectify the issue remotely. **Issue Description:** The spray booth has two operating cycles: 1. **Spray Cycle** – The fan starts and operates as required. 2. **Cooling Period** – The fan switches OFF as per the sequence. 3. **Bake Cycle** &ndash...

...and software-programming sides of my machine-building project. The mechanical portion is already under control in-house, so your focus will be integrating, testing, and refining the control electronics and embedded code that drive the system. You should be comfortable reading and updating wiring schematics, selecting or replacing critical components, and writing clean, well-documented firmware or PLC logic that keeps everything running reliably. If you can also implement quick diagnostic routines and safety interlocks, even better. Scope at a glance • Review existing electrical design, spot weak points, propose improvements • Develop or optimise the control software (C/C++, Python, or ladder logic—whichever best fits) • Support bench-top testing and p...

I need an experienced Allen Bradley programmer to spend a few days on-site at a production facility in the Emirates. The installed PLC platform is ControlLogix, and the goal is simple: get the line running smoothly again by finding and clearing the underlying faults. You will connect with your own laptop loaded with Studio 5000 / RSLogix 5000, RSLinx, and the usual Allen Bradley diagnostics utilities, trace the error path, implement a solid fix, and document exactly what was changed so my maintenance crew can follow up later. A quick hand-over session with the local technician at the end of each day keeps everyone aligned. Daily rate is 68 USD; travel and accommodation are handled separately. If you have a track record of fast, methodical troubleshooting on ControlLogix platforms ...

...work. We prefer an engineer who has strong experience with both Allen-Bradley and Siemens PLC systems. Most of the issues we face are related to the communication between the compressor PLC and the DCS, so strong troubleshooting and communication experience is very important. The salary will be a fixed monthly salary. In addition, whenever we have a site/project assignment, the engineer will receive a daily per diem. The nature of the work is compressor commissioning. The engineer will travel to the site and work together with another engineer from our team. His main responsibility will be to support the commissioning and troubleshoot the PLC/automation system. If there is any issue or error in the PLC program, he should be able to identify and modify the...

I need a PLC program for industrial automation in the Oil & Gas sector, specifically for upstream processes. The ideal candidate should have: - Expertise in PLC programming - Experience with Oil & Gas industry, especially upstream operations - Knowledge of industrial automation protocols and standards - Ability to develop reliable and efficient control systems Please provide examples of previous work and relevant certifications.

I have numerous Siemens PLC on the plant floor, and also some machines which do not have a PLC currently. The goal is to get all machines feeding data into "IGNITION PERSPECTIVE" software in various dashboards etc. For the machines that do not have PLC's currently, "CLICK PLC's" have been investigated and seem a good solution for basic "ON/OFF" monitoring etc. Some work has already been done and can be shared. Ideally this will be done on site at EN11 0BW (Hoddesdon, Hertfordshire) at least partially. Opportunity for continued permanent employement is available if interested.

...deliver a clean, documented integration that drops straight into the machine. Fanuc, Siemens, Centroid, or an open-architecture solution such as LinuxCNC are all on the table—the key is rock-solid reliability and supportability. To keep the project organized, I expect the following tangible items: • Detailed retrofit plan and schematics • Bill of materials with part numbers and suppliers • PLC/ladder or equivalent logic program plus HMI screens • Parameter files and post-processor setup for turning cycles • Commissioning checklist with test cuts focused on load, thermal stability, and vibration to prove the durability uplift Remote guidance is fine for most of the work, but I will need live video support during power-up and initial tuni...

...into detailed engineering and need a seasoned electrical designer to pick up the load calculations, schematics, and layout work. The scope centres on two areas: • Power distribution systems – accurate single-line diagrams, cable sizing, panel schedules, short-circuit and voltage-drop studies. • Control systems – control panel layouts, I/O lists, and wiring diagrams that integrate smoothly with PLC hardware. I already have general corporate guidelines and typical drawings that outline preferred symbols, layer naming, and drafting conventions; you’ll refine and expand these into full construction-ready documents that comply with NEC/IEC and any site standards we identify together. Typical deliverables I’ll be looking for: 1. Updated design...

I need a compact, well-structured PLC program for a Delta controller that will drive two servo motors in perfect synchrony, using pulse-and-direction signals. The servos form the heart of a custom lemongrass-cutting machine, so tight positional tracking between both axes is critical; any lag or mismatch will affect cut quality. The work involves: • Writing and commenting the ladder / structured-text code (WPLSoft or ISPSoft—whatever you are most comfortable with) so that both axes accelerate, run, and decelerate together from a single command source. • Setting up all relevant parameters for pulse output, high-speed counters, and motion settings on the Delta PLC as well as the matching Delta servo drives. • Supplying a brief commissioning guide&mda...

Build a professional, responsive one-page WordPress website for JSES (Jupiter Software & Engineering Solutions), an India-focused engineering procurement support company. The website should generate enquiries for PLC/automation hardware, industrial valves and process instrumentation. Use a clean, modern B2B industrial design with a strong hero section, JSES logo, brand/manufacturer section, product categories, technical procurement support/process, industries served, and a prominent “Tell Us What You Need” enquiry form. Navigation: Home | About Us | Contact | Submit Enquiry. Engineering Resources should remain Coming Soon. The enquiry form should collect manufacturer, product category, technical requirement/part number/BOM, quantity, required-by date, customer/com...

The shocker-testing machine on my line already has a full SCADA package in place, yet it keeps dropping communication with its PLC, attached sensors, and actuators. The HMI screens load fine, but tags freeze, commands fail to reach the field devices, and alarms flood the log. I need the existing project inspected, its driver or protocol stack corrected, and the link restored to rock-solid reliability—no redevelopment from scratch, just a clean, well-documented fix. Scope of work • Audit the current SCADA project, driver settings, and network configuration. • Pinpoint the root cause of the PLC, sensor, and actuator comms failures. • Implement and test the corrective actions so data reads accurately and control writes execute every cycle. • Supp...

I need an automated AHU filter cleaning machine designed. I'm looking for expertise in 2D drafting and PLC controls design. Requirements: - 2D Drafting: Full system design. - PLC Controls Design: - Automated cleaning cycle - Fault detection and reporting - User interface for manual control Ideal Skills and Experience: - Proficient in CAD software for 2D drafting - Experienced in PLC programming and control systems - Background in mechanical and electrical system integration Please provide portfolios and relevant experience in your bids.

...legacy project, cleaning the device data, and redrawing the schematics so they comply with today’s automotive standards. During the conversion you will: • Add several new components recently introduced to the machine build. • Replace every instance of the obsolete drives, I/O cards and safety relays with their modern equivalents. • Re-work the PLC, HMI and safety networks so the drawings show a fully integrated system (all cross-references, PLC addressing, terminal plans and cable lists must update accordingly). Deliverables I expect at hand-off: 1. A complete, error-free EPLAN P8 project file (.elk) with all pages validated by EPLAN’s message management. 2. Updated device, terminal and cable reports exported to PDF and Excel. 3. A co...

I need a clean program backup taken from my Schneider Modicon TM218LDA40DRN PLC. The controller is currently powered up, functioning as normal, but it is offline from any engineering workstation. Nothing on the machine can be stopped or altered; the task is strictly to extract the application code for safekeeping. You will arrive (or connect, if you already have secure remote access to the site) with the correct Schneider cable and use EcoStruxure Machine Expert / SoMachine to communicate with the CPU. Once connected, please read out the complete program, including all symbol tables and comments that reside on the device, then save the archive in Schneider’s native formats (.stu and compressed backup). Afterward, open the file on a separate workstation to confirm its integrit...

...specialist to review, modify, and extend the PLC logic on an active production line. All programming will be done in TIA Portal, and the work includes: • Analysing the current STEP 7 code to spot inefficiencies or faults. • Implementing new control sequences and safety interlocks in accordance with our existing documentation. • Testing the revised logic with live I/O simulations before we deploy on-site. • Generating concise comments and a change log so future maintenance is straightforward. You will have remote access to the CPU (S7-1500 series) through a secure VPN, plus online support from our on-site technician during download and commissioning. Familiarity with industrial networks such as PROFINET and Modbus TCP is useful because the PLC ex...

We are looking for an experienced AutomationDirect Do-more PLC Engineer for a technical consultation to review an existing H2-DM1E PLC program, assess the current ladder logic and approximately 10,000 tags/data points, and recommend improvements for program optimization, communication, and future SCADA integration. Strong experience with Do-more Designer, Modbus TCP, PLC-to-SCADA communication, and legacy PLC modernization is required; experience with GMP/21 CFR Part 11 systems is preferred.

...and remove the legacy Siemens controller, old drives, and obsolete Assembly: Mount and wire the new Syntec controller, Yaskawa drives, breakers, and auxiliary components into the electrical cabinet based on the approved Integration: Replace or rewire end-stops, home sensors, and pneumatic control switches. Phase 4: PLC Programming & Parameters Configuration — On-SiteSyntec PLC Customization: Program the Syntec PLC logic to handle machine-specific functions (e.g., tool changer carousel, dust extraction hood, lubrication cycles, pneumatic clamps).Drive Tuning: Configure and tune the Yaskawa servo drives for optimal acceleration, deceleration, and loop stability. Phase 5: 5-Axis Calibration & Final Integration — On-SiteKinematic Setup: Configure ...

Node-RED + CODESYS OPC UA Dashboard I have developed a **Smart Warehouse Order Processing & Monitoring System in CODESYS** using Ladder Logic. The CODESYS HMI is already working, and the PLC simulation is running. I want to create a separate Node-RED dashboard** that connects to my CODESYS PLC through OPC UA without disturbing my existing CODESYS HMI. What I have done so far: * Created the complete warehouse logic in CODESYS. * Created the CODESYS HMI with buttons, status indicators, gauges, and order information. * Enabled the CODESYS OPC UA server. * Verified the OPC UA server using UA Expert; the variables show *Good* status there. * Installed and configured Node-RED with OPC UA nodes. * Configured the endpoint as `://localhost:4840`. * Added my CODESYS variable N...

...from my PLC / HMI instead of pressing the front panel keys. The idea is to tap into the oven’s control board (or replace it if that proves cleaner) and expose safe, isolated I/O points the PLC can drive. The job covers tracing the existing circuitry, designing a small interface that links the magnetron controls and door interlocks to digital or serial lines, and supplying the PLC logic and an HMI screen so I can trigger a cycle, set the exact seconds, and vary the power level without touching the appliance. Safety is critical: all native protections, RF shielding, and door-closed interlocks must stay intact. I am currently running a Siemens S7-1200 but can map your code to another platform if that speeds things up. Deliverables • Schematic and wiri...

...AutoCAD Electrical or EPLAN (DWG + PDF). • Control panel layout, terminal diagrams and cable schedules. • Bill of materials with manufacturer part numbers and load calculations. • Compliance notes to IEC/NFPA standards that apply to the plant. • A concise design brief explaining operational sequences so my PLC programmer can pick it up without guesswork. If you already work in a different CAD platform, mention it; I can adapt as long as I get editable files. Familiarity with PLC, SCADA and general automation practices is important because I value design decisions that anticipate programming and commissioning. I can supply the P&IDs, device list and an outline of the required sequences as soon as we start. Let me know your typical turnaroun...

...Requirements: 1. Plant Capacity: 3 TPD (Tons Per Day) - Batch Type Reactor System. 2. Final Product: Ultra-Low Sulfur Commercial Diesel (BS6 standard: Sulfur < 8 ppm, Cetane 55-58, Density 833-840). 3. 100% Zero Pollution: Must include a closed-loop Syn-Gas recycling system, water recycling (Zero Liquid Discharge - ZLD), and a dual-stage flue gas scrubber system. 4. Automation: Design for a semi-automatic PLC-based instrumentation panel to monitor temperature and pressure. Deliverables Needed: • Chemical Mass & Energy Balance Sheet. • 3D AutoCAD / SolidWorks design for Reactor, Fractionating Distillation Column, Condenser, and complete BOM (Bill of Materials). • Technical guidance for our local fabrication workshop teams. If you have prior experience in re...

I have an 18-station screw-tightening line that needs a robust PLC program and on-site commissioning. You will start with the existing PLC backup and full electrical drawings, then tailor the logic so each station runs smoothly from part loading right through to validated torque confirmation and safe de-clamping. The control platform is a mix of Siemens and Mitsubishi hardware, so proven experience with Step 7 / TIA Portal and GX Works (or the equivalent) is essential. If you are also comfortable on Allen-Bradley that’s a plus, but the core of the project must run flawlessly on the two brands already in place. A Delvo electric screwdriver system provides torque feedback; your code must capture that data, count every screw, compare it against setpoints, and trigger ala...

PLC & Robot Data Integration Engineer — Contract Project (4 Months) Project Type:Fixed Price Contract Budget: ₹3,00,000 (slightly negotiable) Duration: 4 months Location: On-site required (Satara, Maharashtra) — remote-only freelancers will not be considered Start: Immediate --- Project Overview We run AI-powered robot health monitoring and machine inspection systems on live automotive OEM shop floors — CNC/VMC/HMC/lathe machines and industrial robots (KUKA, Fanuc). We need a hands-on automation/controls freelancer to pull real-time and historical data directly off PLCs, CNC controllers, and robot controllers at our Satara plant, and get that data flowing reliably into our central server/database. This is floor-based integration work — connecting to ...

...design. That means every page must adopt IEC symbols, device tag structure, and drawing layout identical to the reference file I will supply. Beyond simple redrawing, I expect an intelligent P8 project: device macros correctly placed, full part master data filled out, cable and wire numbers auto-generated, and all PLC addresses mapped. Please include inverter parameter sheets and a tidy terminal block overview so the shop floor can build straight from the print. Key deliverables • PLC I/O mapping embedded in the project • Inverter parameter documentation tied to each drive object • Terminal block layouts generated from the device navigator To help me gauge fit quickly, attach examples of past EPLAN or similar IEC conversion work—screenshots or PDF e...

...tranquil and adult, focusing on the objects. We want to see four distinct working stations or object clusters representing our main services. The Four Essential Elements to Include: ENGINEERING (CAD & Konstruktion): A clean desk workstation with a modern computer running professional 3D CAD software (displaying a schematic). Refer to previous concepts: clean, organized desk. AUTOMATION (Steuerung & PLC): A professional electrical control cabinet, neatly organized, possibly slightly ajar to show internal components or with a clean HMI (Human-Machine Interface) screen. DRIVE TECHNOLOGY (Antriebstechnik): A high-quality electric motor (or a motor-gearbox assembly) professionally mounted on a test stand or work surface. REFRIGERATION TECHNOLOGY (Kältetechnik): A mod...

For this project, I need a SCARA robot controlled using four Mitsubishi motors and drivers to execute specific movements based on kinematic equations that I will provide. The system must be programmed on a PLC using GX Works3, and it must also simultaneously control an additional small motor for the gripper mechanism, allowing it to rotate 90 degrees in both directions. Please note that my GX Works3 license is provided by my school and is strictly tied to my personal PC; since I cannot share the software license, the developer will either need to have their own, or we will have to collaborate by setting up a remote desktop connection to my computer.

I need a PLC system designed and set up to control oven/kiln temperature and manage a speed-controlled auger that moves product through this oven/kiln. Requirements: - PLC setup to control temperature (480VAC) and DC auger speed. - Integration of 3-thermocouples for temperature zone measurement. Ideal Skills and Experience: - Proficiency in PLC programming (any brand). - Experience with thermocouples and temperature control systems. - Knowledge of industrial automation and control systems.

... speed, etc.) • Production statistics (throughput, yield, rejects) • Energy consumption (per machine and overall) The app must compile for both iOS and Android from a single code base—Flutter, React Native or a comparable toolkit is fine—presenting intuitive dashboards, trend charts and push-alert thresholds. A lightweight cloud back-end (Firebase, AWS, Azure or similar) will collect sensor or PLC data; please set it up, expose documented REST or MQTT endpoints, and ensure the architecture scales for later bidirectional control. Deliverables 1. Source-controlled mobile app running on iOS & Android 2. Cloud back-end with database schema and APIs 3. Deployment & hand-over documentation 4. Brief walk-through session Acceptance criteria: build install...

Overview We are looking for an experienced CSV and regulatory compliance consultant to support a GMP software remediation and validation project for a legacy PLC-based sterilization control system used in a regulated medical device and pharmaceutical environment. Project Background The system is a custom, Do-more Designer H2-DM1E PLC-based sterilization control system with a C-More HMI (Version 4.01), in continuous production use for over 10 years. The system currently has no audit trail, no user access controls, no password management, no electronic signatures, and no SDLC documentation — requiring full 21 CFR Part 11 compliance remediation. Scope of Work Stage 1: Gap Analysis & Risk Assessment including Software FMEA Stage 2: Remediation Planning & SDLC Fra...

...Feature • Exact location of the vibration units or air-pulse nozzles relative to the outlet gate, vessel wall and support frame. • Type of system selected (mechanical vibration only, pneumatic air-pulse only, or combination). • Mounting method (welded brackets, bolted, clamped, etc.). • Power source and control method (manual switch, automatic activation linked to the hydraulic tilting cylinder, PLC timer, pressure switch, etc.). • Operating sequence – when the system is activated and deactivated during the discharge cycle. • Any safety interlocks or features (e.g., cannot operate when inlet/outlet gates are closed, emergency stop). • Key component specifications (vibrator model/force rating, air pressure range, nozzle size, etc.). C. Adva...

I need a concise, production-ready program written in WPLSoft for a Delta DVP-series PLC. The sole objective is to automate a manufacturing process that is currently handled manually, so the logic must cover all machine sequences, safety interlocks, start/stop routines, and alarm handling. You will receive a full I/O list, basic wiring diagram, and the intended sequence of operations the moment we start. Your task is to translate that sequence into ladder logic (or sequential function chart if you prefer) inside WPLSoft, simulate it to prove the timing, and then provide the downloadable .DVP project along with a brief commissioning guide so my on-site technician can load, test, and fine-tune it. Key expectations • Program must be created in WPLSoft and match the Delta D...

I'm seeking an experienced PLC programmer to develop a program for Automation Direct PLCs. The primary task of this program will be motor control, essential for our machine control operations. Key Requirements: - Expertise in Automation Direct PLCs - Proficient in motor control programming - Experience in industrial automation, specifically in machine control contexts Ideal Skills and Experience: - Strong background in PLC programming - Familiarity with Automation Direct software and hardware - Previous projects involving similar motor control tasks Please provide samples of related work and a brief outline of your approach. Looking forward to your bids!

...and other assembly errors. The dashboard is only used to display the following information after fetching from the camera: 1. Current inspection image 2. Current inspection results Operating Procedure: • Operator loads the metal part onto the table • Operator triggers the camera • The camera captures an image and processes it • The camera gives the results over PROFINET to a connected Siemens PLC. • The camera sends the captured image using FTP to a connected PC • Our dashboard is running on this connected PC to display the images and the results from the camera. Deliverables • Stable WebSocket module with reliable, ordered data flow • Clear comments/tests showing the fix in action • Performance report plus implemented optimi...

We are looking for an experienced CSV and regulatory compliance consultant to support a GMP software remediation and validation project for a legacy PLC-based sterilization control system used in a regulated medical device and pharmaceutical environment. Project Background The system is a custom, Do-more Designer H2-DM1E PLC-based sterilization control system with a C-More HMI (Version 4.01), in continuous production use for over 10 years. The system currently has no audit trail, no user access controls, no password management, no electronic signatures, and no SDLC documentation — requiring full 21 CFR Part 11 compliance remediation. Scope of Work Stage 1: Gap Analysis & Risk Assessment including Software FMEA Stage 2: Remediation Planning & SDLC Framewo...

...typical AutoCAD Electrical workflow—schematics first, panel layouts later—but the quality of the symbol library and the accuracy of the reports are what really drive my productivity. Here is what you will tackle first: • Design and manage custom schematic and footprint symbols, keeping the library tidy and searchable. • Set up automatic reports (BOMs, wire and cable lists, terminal plans, PLC I/O summaries, from/to reports) with custom templates that export smoothly to Excel or PDF. Beyond those priorities, you’ll also maintain the catalog/part database in line with IEC standards, making sure every new component entry or update stays compliant. If you are comfortable slipping a bit of LISP or other scripting into the process to speed repetiti...

...steel rings. The unit must run in fully automatic mode, triggered from a simple set of physical push-buttons on the front panel. Clear LED indicators should confirm current status, and the operator has to be able to dial the holding force up or down through adjustable strength settings. I’m expecting a turnkey package: electronic schematics, PCB layout files, firmware source code (C/C++ or suitable PLC ladder if you prefer), a concise bill of materials and basic assembly instructions. A short test routine that demonstrates a full magnetise–hold–demagnetise cycle will serve as acceptance. If you have experience with high-current power stages, H-bridge control, soft start / discharge techniques and safe handling of residual magnetism, that will be a big plus. Pl...

Development of an OCR-Based Industrial Vision System using NVIDIA Jetson Orin Nano About Us We are an industrial automation company specializing in r...instructions  Installation guide  User manual  Documented code  Camera configuration  Test dataset  Sample results  Deployment support Acceptance Criteria  Runs on Jetson Orin Nano  Reliable OCR under controlled lighting  Near real-time processing  Modular architecture Future Opportunities Successful completion may lead to follow-on projects in barcode reading, AI inspection, robot guidance, PLC communication and multi-camera vision. Proposal Requirements  Relevant experience  OCR references  Jetson/OpenCV experience  Timeline  Commercial quotation  Portfolio/GitHub  Proposed architecture

We are looking for an experienced CSV and regulatory compliance consultant to support a GMP software remediation and validation project for a legacy PLC-based sterilization control system used in a regulated medical device and pharmaceutical environment. Project Background The system is a custom, Do-more Designer H2-DM1E PLC-based sterilization control system with a C-More HMI (Version 4.01), in continuous production use for over 10 years. The system currently has no audit trail, no user access controls, no password management, no electronic signatures, and no SDLC documentation — requiring full 21 CFR Part 11 compliance remediation. Scope of Work Stage 1: Gap Analysis & Risk Assessment including Software FMEA Stage 2: Remediation Planning & SDLC Framewo...

I am building a small-scale oil-handling package and need a Siemens PLC program that keeps product moving efficiently while making sure tanks never run dry. The core of the job is to write, test, and document logic that optimises flow, pulls accurate readings from our flow sensors and low-level sensor, and then drives the valves, pumps, and any other actuators that respond to those readings. Everything must tie neatly into the HMI; I’d like operators to have both a touchscreen view and a secondary PC or hard-key option so they can work comfortably from the panel or the control room. The system’s sole purpose is process optimisation, so response time and deterministic behaviour are critical. I am already committed to Siemens hardware (S7-1200 series with a basic comfort ...

I need a skilled PLC programmer to develop a control system for an oil project. The PLC will be a Siemens model and will handle flow control and low-level sensing. Key Requirements: - Flow control management - Low-level sensor integration - Interface with sensors, actuators, and HMI Ideal Skills and Experience: - Proficiency in Siemens PLC programming - Experience with flow control and sensor integration - Familiarity with HMI and actuator interfacing Please provide relevant experience in your bids.