Tapis

Carian terbaru saya
Tapis mengikut:
Bajet
hingga
hingga
hingga
Jenis
Kemahiran
Bahasa
    Status Pekerjaan
    2,000 stl tugasan ditemui, harga dalam USD

    I want a 3d model of a pool in the shape of a hair bow. The lenght of the pool should be around 22 cm, the width of the pool should be around 11 cm, and the height of the pool should be around 5 cm. The tickness of the side should be around 2 mm. I also want a hole in the vertical line (the side only not the bottom) of one of the corners of the pool. It has to be as low as possible withou...width of the pool should be around 11 cm, and the height of the pool should be around 5 cm. The tickness of the side should be around 2 mm. I also want a hole in the vertical line (the side only not the bottom) of one of the corners of the pool. It has to be as low as possible without it going into the bottom of the pool. The diameter of hole has to be 8 mm. The 3d model has to be sent to me in stl...

    $86 (Avg Bid)
    $86 Avg Bida
    36 bida

    Sila Dafter atau Log masuk untuk melihat butiran.

    Ditampilkan Perjanjian Kerahsiaan

    i want to create the uploaded photo as a stl file so i can 3d print it

    $29 (Avg Bid)
    $29 Avg Bida
    34 bida

    Hello i need to modify a STL file and save it as STEP

    $104 (Avg Bid)
    $104 Avg Bida
    56 bida

    I want to design a snap lock mechanism frame. Most of the diagram is ready, only need to design one last piece. We are going to make an aluminum dye and test it with 3d printing first. We want some one whole will be able to design and provide us with the .stl file to 3d pint and test the product.

    $76 (Avg Bid)
    $76 Avg Bida
    27 bida
    3D Modeling Tamat left

    Hi, I'm looking for someone to make a 3D model of these shapes on Rhino in order to 3D print. I would only need the Rhino file I'll export the STL file myself. I want these shapes to be connected to each other and empty because I'll add magnets and lights inside and glue the parts together. My purpose is to create this cute little city and be able to build it together with magnets so I'll need someone to exchange with me to figure out where to put magnets on each piece. We will obviously only use the big shapes on the image. PS: It's a short project, so I need us to work fast on this one I'll give you more information privately, Thank you, Charlotte

    $111 (Avg Bid)
    $111 Avg Bida
    40 bida

    I am looking for someone who can process 'Artec Studio 15' scans. These are always technical scans for the construction of structural components. Artec studio 15 software is needed to process 3D scans to .stl format.

    $13 / hr (Avg Bid)
    $13 / hr Avg Bida
    12 bida

    I have about 30 Recon Sentinel SBC devices. I want to have someone create an STL file where I can print my own cases for them in a little different case design. I've attached a pic of the original design.

    $119 (Avg Bid)
    $119 Avg Bida
    25 bida

    Je cherche quelqu'un qui pourrait se basé sur des photos d'un visage pour le reproduire en 3D pour éventuellement être en fichier .stl et être imprimé par une imprimante 3D.

    $136 (Avg Bid)
    $136 Avg Bida
    6 bida

    crear un ortesis a partir de una STL generado por scanner 3D. debe tener 2 ml de offset.

    $27 (Avg Bid)
    $27 Avg Bida
    9 bida
    Create a stl. Tamat left

    Need provided picture turned into an stl. file so I can print it as a 10x10 plaque to go on a customers wall. Thank you.

    $26 (Avg Bid)
    $26 Avg Bida
    25 bida

    I supply you with a picture (jpeg) of face/torso and you prepare a 3D model that can be use for CNC carving. CNC software that I use is Aspire (version 10.5). Aspire in this version can import files: CRV3D, 3DCLIP, V3M, STL, DXF, 3DS, OBJ, SKP and other. Project consists from 3 pictures with different faces that need to be converted to 3D models. In future possible new jobs with the same scope of work. Work example is needed.

    $150 (Avg Bid)
    $150 Avg Bida
    8 bida

    I have STL scan data file for a simple tank I want to reverse engineer it using geomagic design x or solidworks The part is simple.

    $25 (Avg Bid)
    $25 Avg Bida
    57 bida

    Need two sheriff badges created and the .stl file for 3d printing with Cura. Both badges are the same except for a text change. the Badge is a simplified versionof the state of Ohio sheriff badge.

    $23 (Avg Bid)
    $23 Avg Bida
    5 bida

    ...0.18. I am an absolut beginner and need help to finish my project. Current problems: 1) Corner fillets (each side of a cube) are only visible on the cube (main geometrical object) but not on the total object. It seems they are somehow separated? When I export the object to .STL, the fillets are not visible at all. I guess i didnt understand the "tree"/order of generating objects. 2) I added a text which is extruded on the object. The text is treated separated but i want it to be part of the object. When i export to .STL, the text becomes a separate file (I want it to be included in one file). 3) I would like to add two more graphs on the object but i dont know how. One is the CE mark (European health, safety, and environmental protection standard) and the second...

    $18 (Avg Bid)
    $18 Avg Bida
    7 bida

    Designing women's underwear to fit the size of a 3D body scan. Since the garment deforms (resting/kinetic energy) when it is put on, the challenge is to design the ergonomic garment before putting it on so that it fits perfectly after putting it on. There is already a 3D model version (.stl) that still needs to be specifically modified. For example, the material has to be thinned out in certain places (down to 2 mm). Precision is the top priority

    $107 (Avg Bid)
    $107 Avg Bida
    13 bida
    Clocks design Tamat left

    Hi I need a clock designed I need a stl stp ans pdf

    $65 (Avg Bid)
    $65 Avg Bida
    19 bida

    Hi, Im after an STL FILE, for a stone archway similar to the one in photo. Dimensions etc will be provided. It eill need to have 'feet area' with hole for acrews to hold it down. If its easier i van buy this exieting STL file and it can br mosified. Thanks T

    $14 (Avg Bid)
    $14 Avg Bida
    8 bida

    We have an existing STL file of a human hand, overall the model is good for our needs but requires a little more detail and/or definition for the creases in the skin at the joints and also around the fingernails, these details are not very clear when the file is 3D printed, as almost disappear completely when the printed model is sanded and painted We require 3D artist to sharpen the existing detail and add additional details if required please see the attached file for areas to be improved, STL file can be shared upon request Please note we require basic details to be added the details just need to be well defined - we are not looking for a work of art! This is a quick turnaround project with a minimal budget

    $81 (Avg Bid)
    $81 Avg Bida
    20 bida
    Stl model Tamat left

    700mm stl sculpted model ~ ...

    $51 (Avg Bid)
    $51 Avg Bida
    1 bida

    make a 3D model STL file of a can holder Later we will print it at home in our 3D PRINTER The hole diameter is 3mm greater than the diameter of a can. That is, 1.5mm gap each way. The can holder needs to be as deep as 1/3 of a typical can.

    $94 (Avg Bid)
    $94 Avg Bida
    41 bida

    I need a model (stl file is fine) for the amazon part : https://www.amazon.com/Drive-System-Chain-Sprocket-Motorcycle/dp/B088ZZ555L/ref=sr_1_2?crid=1R87YBHAO92MM&keywords=Drive+system+T8F+Chain+%26+6T+gear+box+%26+Rear+sprocket+kit+for+mini+motorcycle+47cc+49cc&qid=1649955525&sprefix=drive+system+t8f+chain+%26+6t+gear+box+%26+rear+sprocket+kit+for+mini+motorcycle+47cc+49cc%2Caps%2C154&sr=8-2. This would be the Drive System T8F Chain & 6T Gear Box & Rear Sprocket Kit for Mini Motorcycle 47cc 49cc listed for $33.8. I'll need the chain and sprocket as a separate stl and the gear box as a separate stl. I also need a method designed to interface the gear box to a nema 23 motor. This would use the shaft coupler https://www.amazon.com/Aluminum-Cou...

    $105 (Avg Bid)
    $105 Avg Bida
    53 bida

    Estoy buscando un diseñador que ajuste el tamaño y adicione algunos requerimientos a una cabeza de muñeca que ya está diseñada en stl , para imprimir en resina .

    $31 (Avg Bid)
    $31 Avg Bida
    13 bida

    We are are dental office who offer digital dentistry. We need a cad/cam technician to design crowns, create design mock up of teeth (smile design) from STL files.

    $34 (Avg Bid)
    $34 Avg Bida
    21 bida

    Archivos STL para impresión 3D de miniaturas para pintado.

    $112 (Avg Bid)
    $112 Avg Bida
    38 bida
    Figura Rana 3D Tamat left

    Estoy creando una maqueta de la atracción de feria de la Rana. Necesitaria el diseño de la figura en formato STL para que pueda imprimirla en mi impresora 3D.

    $1157 (Avg Bid)
    $1157 Avg Bida
    14 bida

    We are looking for a contract Mechanical Engineer or technologist to process some work we are behind in. This work would be accurately producing a STEP file from high resolution 3D Scans (.STL). Ideally the contractor would have their own software, be conversationally fluent in English, and hardworking. If hired there is over 100 hours of work in the next few months.

    $9 / hr (Avg Bid)
    $9 / hr Avg Bida
    84 bida

    Necesito un archivo stl del busto de Cesar Vallejo para poderlo imprimir en una impresora 3d de resina y pla

    $56 (Avg Bid)
    $56 Avg Bida
    8 bida

    Hello we require a XML file to be produced into a 3d printing file STL format. ARCMap

    $81 (Avg Bid)
    $81 Avg Bida
    3 bida

    I have been working on a personal project which I'd like to make with 100% accuracy every-time a pill is dispensed. The mechanism is very simple but it requires me to know CAD/3D Modeling softwares which I have no experience in. I prefer someone with CAD/3D Modeling knowledge who also understands the concept from an engineering standpoint. The mechanism is very similar to () which I have already achieved with a slight different design but I think creating a new mechanism similar to the one in video will help me achieve what I want in this project. I have a 3D printer at home so I'd like to get this project going and test it out to be able to achieve a working prototype. (Will be discussed as we build revisions)

    $29 (Avg Bid)
    $29 Avg Bida
    11 bida

    i need designing a hammer from a game. its fairly small and nice looking.

    $114 (Avg Bid)
    $114 Avg Bida
    67 bida

    Deliverable is a simple web application that can be used to design "Name/Symbol Pendant models" in freely available Fonts/Symbols open source libraries with the ability to save the designed 3D model with Gold and Silver color rendering. The model should have ...application that can be used to design "Name/Symbol Pendant models" in freely available Fonts/Symbols open source libraries with the ability to save the designed 3D model with Gold and Silver color rendering. The model should have the ability to add different sizes of stones. The pendant should have the provision of adding bails. The the designed and saved file should be in .obj and .stl format. The file so created should be printable using a 3D printer. More details can be provided during further discus...

    $1187 (Avg Bid)
    $1187 Avg Bida
    14 bida

    I am seeking someone to deliver some 3D designs of figures that I can print on my 3D resin printer. I use these in my modelling hobby. I want the designs to be scalable, so that I can take the same design and rescale it myself to be able to print from...scalable, so that I can take the same design and rescale it myself to be able to print from 1:22.5 scale (16mm to foot) down to 1:76 (4mm to foot) scale depending on what I am building. Initially this brief is to produce 6 sitting figures in civilian clothing. If these turn our well, then the project will extend to producing a range of other figures. You will deliver your design source file and .stl file for each of the initial 6 designs. Please review the more detailed design brief attached but if you have any questions please get...

    $176 (Avg Bid)
    $176 Avg Bida
    31 bida

    I would like to have made 6 3d printable chess pieces of the attached people. Deliver STL files in addition to original format files. Note: contest is for set of 6 pieces.

    $100 (Avg Bid)
    Dijamin
    $100
    16 penyertaan

    I need someone to model a 3d figure for me from the provided pictures, please tell me your price and how long it would take. I need a different pose of the character. It needs to be solid on the inside so i can 3d print it. Output file for me needs to be .stl

    $162 (Avg Bid)
    $162 Avg Bida
    40 bida

    Deliverable is a simple application that can be used to design "Name/Symbol Ring and Pendant models" in freely available Fonts/Symbols open source libraries with the ability to save the designed 3D model with Gold and Silver color rendering. The the designed and saved file should be in .obj and .stl format. The file so created should be printable using a 3D printer. More details can be provided during further discussion

    $661 (Avg Bid)
    $661 Avg Bida
    6 bida

    hello, Nezuko Kamado is a character in Demon Slayer anime .. I would like printable STL 3d file with colors & details , to have a post for it .. example of work : I need something is not free in the internet , custom made with copyrights

    $68 (Avg Bid)
    $68 Avg Bida
    17 bida

    Looking to hire a 3d designer to revise an existing design. I can provide the STL file for the existing details, and I can provide other details for the revision.

    $128 (Avg Bid)
    $128 Avg Bida
    50 bida

    I need a 3D model of an idol's face in STL format. Images from all angles of the face will be provided. No deadline, the freelancer can take time and finish the job.

    $23 (Avg Bid)
    $23 Avg Bida
    8 bida
    3D CAD Design Tamat left

    I would like to hire someone to use CAD to 3D render and create an STL file of our dog from photos, with the final intent to have it 3D printed.

    $128 (Avg Bid)
    $128 Avg Bida
    38 bida
    Pottery Base Tamat left

    Pottery base STL and DXF file

    $117 (Avg Bid)
    $117 Avg Bida
    12 bida
    3d modelling Tamat left

    I require a 3d stl format printable model built from photos. The original item was stolen and actual measurements are not available so they will have to be deduced from the photos.

    $145 (Avg Bid)
    $145 Avg Bida
    47 bida

    I require a 3d design to be printed, please check screenshot, I will be sending STL file for copy the dimensions, the piece should be copy, but should have any modifications to get to the target 3dmodel I attach pic Project where stl: SourcePiece TargetPiece (work terminated)

    $48 (Avg Bid)
    $48 Avg Bida
    37 bida

    deseo que me ayuden a diseñar gallos de pelea aparti de fotografías

    $51 (Avg Bid)
    $51 Avg Bida
    10 bida

    ...contest. If you are familiar with 3D printing it will also help as print orientation, holes, and printing without support materials are also factors. In previous contests the top 3 designs were all so well done that the 2nd and 3rd place designs were also purchased. Please ask for any clarifications before doing any work to avoid designing something that will ultimately get rejected. File formats are STL/3MF and the native format from your design software (please include both if you are the winner). Good luck! Additional Links for inspiration: :4229445 :3586392 :2397919 :4802113 :4964330 :3192178

    $89 (Avg Bid)
    Ditampilkan Dijamin Peraduan Teratas
    $89
    18 penyertaan

    ...terminar la nave, le falta un sector del motor trasero. b)"Alargar" la nave, las proporciones no son correctas. y si coresponde otros detalles. c) Agregar "parque" o "bosque" en sector trasero superior. la nave en la parte trasera en un secotr rectangular, posee "paruqe o bosuqes para que la tripulacion camine, se debe simular uno de estos desde una vista superior, con tectura, o /u otro archivo stl, que ya exista con tan de solo acomodarlo. d) Agregar ciudad interna o principal. No existen muchos planos o guias de cuantos "pisos" posee, pero tal como el anterior, si ya exiuste un modelo 2d de alguna cuidad futurista. el cual se pueda integrar a lo ya realizado. e) Agregar ciudad redonda., o mismo que en la ciudad anterior, solo que es...

    $50 (Avg Bid)
    Dijamin
    $50
    14 penyertaan

    Design of a garment adapted to the size of a 3D simulation (3D body scan). As the tensioned garment deforms when dressed, the challenge is to design the ergonomic garment before dressing so that it fits perfectly after dressing. There is already a 3D model version (.stl) that still has to be specifically modified. For example, the material has to be thinned in certain places (down to 2 mm). Precision is the highest priority.

    $140 (Avg Bid)
    $140 Avg Bida
    18 bida
    SYMMETRIC RING Tamat left

    Looking for a 3d designer to revise an exiting design. The design is available in STL and SLDPRT

    $107 (Avg Bid)
    $107 Avg Bida
    25 bida

    I am going to 3D print of this model. If you can send me stl file, please bid on this project.

    $138 (Avg Bid)
    $138 Avg Bida
    25 bida

    split the D10, d12, d20 dice shape step/stl symmetrically into half and filled, so the 2 shapes can stack back together when printed

    $59 (Avg Bid)
    $59 Avg Bida
    11 bida

    Artikel Komuniti stl Teratas