Torque limiter asbestospekerjaan

Tapis

Carian terbaru saya
Tapis melalui:
Bajet
hingga
hingga
hingga
Jenis
Kemahiran
Bahasa
    Status Pekerjaan
    1,905 torque limiter asbestos tugasan ditemui, harga dalam USD

    I am in need of a simple php+Memcahe script or an Nginx rate limiter setup to help me prevent a user with the same IP from opening pages on my site too quickly. My initial thought was to use Nginx to accomplish this, but other people were mentioning that using php+memcache would be easier. I need someone who understands this and can best implement it for me immediately. Must be done tonight. P...

    $198 (Avg Bid)
    $198 Avg Bida
    7 bida

    I am in need of a simple php+Memcahe script or an Nginx rate limiter setup to help me prevent a user with the same IP from opening pages on my site too quickly. My initial thought was to use Nginx to accomplish this, but other people were mentioning that using php+memcache would be easier. I need someone who understands this and can best implement it for me immediately. Must be done tonight. P...

    $27 (Avg Bid)
    $27 Avg Bida
    2 bida

    we woud like to auto close our window shutters using no electric, so in effect a one way rotary damper if possible to link to our gears, the shutters are made in different heights and widths, possible max torque around 0.35 nm we need to open the louvres with no or little force and touch one louvre so they all close slowlly togther. please see attachment

    $168 (Avg Bid)
    $168 Avg Bida
    11 bida

    By using the analytical method for the motion generation synthesis for the given slider-crank mechanism. Find position values and link lengths for desired three positions. Attach any code of mathematics software if used. The torque variation of the given mechanism that is used in a tool is to be optimized. A spring is attached to the system for that purpose. The links are assumed massless. The for...

    $119 (Avg Bid)
    $119 Avg Bida
    12 bida

    I have build a model of permanent magnet synchronous motor using Ansys maxwell (Electronics). Now i am not getting required torque. There is need to calculate perfect angle between stator magnetization and permanent magnet rotor [log masuk untuk melihat URL] is high speed synchronous motor about 36000rpm 12KW 220V.

    $11 (Avg Bid)
    $11 Avg Bida
    2 bida

    I need someone with great knowledge of ods and statistics to help me on a project. Odds: The concept of probability and its laws, Bound probability, Independent contingencies, Total probability theorem and Bayes type. Random variables: Specific discrete and continuous distributions of a variable, Mean value and scatter of random variables, Multivariate distributions: Marginal distributions, indepe...

    $28 (Avg Bid)
    $28 Avg Bida
    8 bida

    After month of work I come to a point where one of my projects is finally mature with a detailed “Project Design/Game Document” (Around 10 pages, on LibreOffice, 8 without draws). It can not be enhanced but I included draws for you (I'm not designer, they will only be here for explanation), which cover the whole. Let’s first start with The Project: The Apex Arena, a fully ...

    $2550 (Avg Bid)
    Perjanjian Kerahsiaan
    $2550 Avg Bida
    7 bida
    DC/DC Drive Tamat left

    With reference to the DC motor, load, supply system and converter given in Tabs. 1-4, design a complete DC/DC drive system with:  closed loop current control,  closed loop speed control, by implementing the full model in Simulink. 1 MOTOR DATA 1.1 Nominal voltage V 12 1.2 No load speed rpm 6920 1.3 No load current mA 241 1.4 Nominal speed rpm 6370 1.5 Nominal torque mNm 94.9 1.6 Nominal current ...

    $56 (Avg Bid)
    $56 Avg Bida
    4 bida

    we have designed a powered window shutter using a stepper motor, rack and gears i need to know torque requirments over different heights of window shutters.

    $105 (Avg Bid)
    $105 Avg Bida
    13 bida

    Hi, I need to identify torque in key human joints such as ankle, knee, hip during simple motions like sit-standup, walking with specific speed or walking on the stairs. I can define physical properties of this human (weight and link lengths). Do you know SimTK from OpenSim?

    $31 (Avg Bid)
    $31 Avg Bida
    5 bida

    we need to add one thing. there must be added an electronic controller which s connected to torque converter and the gearbox above with a cable. this electronic controller can be shown as a HMI with screen. the camshaft turning constantly because it s diesel engine connected. but as soon as a signal comes from electronic controller the torque controller clutch the shaft and starts to turn the fans...

    $29 (Avg Bid)
    $29 Avg Bida
    10 bida

    Hello, Need someone to design BLDC motor per below given specification: 1) 1200 watts 2) 48 Volt 3) Rated Torque: 18-20 JM 4) RPM 600 5) gearless/ shoe or disc brake system

    $385 (Avg Bid)
    $385 Avg Bida
    10 bida

    I am looking for a FASTAPI service. Must include: - JWT - Some sort of Limiter to prevent Brute Force Attacks

    $15 / hr (Avg Bid)
    $15 / hr Avg Bida
    8 bida
    Motor drivers Tamat left

    Hi there. I have to replicate the resistance of gym weights by using e brushless motor, and in order to do so I need a driver+software that allows me to control torque and acceleration of the motor and change it in a simple way

    $527 (Avg Bid)
    $527 Avg Bida
    20 bida

    I need mount my camera on the robot, need design a binding mechanism. My camera intel l515 [log masuk untuk melihat URL] My robot [log masuk untuk melihat URL] FT300sensor on robot [log masuk untuk melihat URL] Robotiq140 gripper [log masuk untuk melihat URL] you can easily find the dim and model of these things my old binding mechanism is not desgin for intel l515

    $29 (Avg Bid)
    $29 Avg Bida
    16 bida

    I have a 3D model of a project and need someone to do analysis on it and select suitable material so the machine will not fail(including calculations) and show how different parts work in real life Also need to get calculations on motor specifications like power, torque etc

    $205 (Avg Bid)
    $205 Avg Bida
    11 bida

    I have a 3D model of a undergraduate project and need someone to do analysis on it and select suitable material so the machine will not fail and show how different parts work in real life Also need to get calculations on motor specifications like power, torque etc. And different calculations for a final project report

    $114 (Avg Bid)
    $114 Avg Bida
    19 bida

    I have a 3D model of a project and need someone to do analysis on it and select suitable material so the machine will not fail and show how different parts work in real life Also need to get calculations on motor specifications like power, torque etc. And different calculations for a final project report

    $172 - $516
    $172 - $516
    0 bida

    my project is a multipurpose agricultural machine which is solar [log masuk untuk melihat URL] can done upto 5 process ,seed sowing ,agricultural spraying,levelling,digging,weed [log masuk untuk melihat URL] didnt manufacture the [log masuk untuk melihat URL] we need to do a motion and force analysis of the [log masuk untuk melihat URL] sad part is that i dont know anything about the torque, HP of...

    $99 (Avg Bid)
    $99 Avg Bida
    4 bida

    my project is a multipurpose agricultural machine which is solar [log masuk untuk melihat URL] can done upto 5 process ,seed sowing ,agricultural spraying,levelling,digging,weed [log masuk untuk melihat URL] didnt manufacture the [log masuk untuk melihat URL] we need to do a motion and force analysis of the [log masuk untuk melihat URL] sad part is that i dont know anything about the torque, HP of...

    $184 (Avg Bid)
    $184 Avg Bida
    7 bida

    have to model and simulate the electric 2-wheeler, required results are; Dynamic results  Aerodynamic drag force vs. velocity of the EV Total tractive force vs. velocity of the EV Linear acceleration force vs. acceleration of the EV. Motor efficiency vs. motor torque Transmission Performance Results  Motor torque vs. angular speed Motor torque vs. velocity Motor torque v...

    $163 (Avg Bid)
    $163 Avg Bida
    6 bida

    After month of work I come to a point where one of my projects is finally mature with a detailed “Project Design/Game Document” (Around 10 pages, on LibreOffice, 8 without draws). It can not be enhanced but I included draws for you (I'm not designer, they will only be here for explanation), which cover the whole. Let’s first start with The Project: The Apex Arena, a fully ...

    $2724 (Avg Bid)
    $2724 Avg Bida
    4 bida

    I want a physics project done for my kid for Grade 12 Topics can be any of the below - kinematics - Work - impulse - Torque - simple harmonic motion - gravitation momentum energy - collisions and explosions - conservation of momentum - conservation of energy Examples of good project submission [log masuk untuk melihat URL] [log masuk untuk melihat URL] [log masuk untuk melihat URL]

    $151 (Avg Bid)
    Dijamin
    $151
    19 penyertaan

    [Tooning] Freelance English to French Web-comic Translators We are looking for skilled freelancers to translate webcomics from English to French. There are a variety of webcomic genres to translate including, but not limited to, romance fantasy, adventure, horror, modern romance, BL, and GL. The ideal candidate will have experience doing similar translations in the comic or entertainment industr...

    $20 / hr (Avg Bid)
    $20 / hr Avg Bida
    44 bida

    Mudança de layout de painel, atualização de tecnologia de motores de passo para servomotores Rexroth. Inserção de devices em rede profibus da linha de produção. Desenvolvimento de lógica de programação codesys, conforme a norma IEC 61131. Testes operacionais e acompanhamento produtivo. Manutenção de produtividade d...

    $250 - $750
    $250 - $750
    0 bida

    Looking for a smart chain developer who can develop a smart contract with the following tokenomics. 2% Burn per transcation 4% redistribution directly into BNB (not token) 2% auto LP 2% add to charity wallet. also buy/sell limiter with maximum buy/sell of 30,000$ if you can do such a contract for a BSC token please contact me.

    $1076 (Avg Bid)
    $1076 Avg Bida
    24 bida

    We at E-Torque are developing an automatic climate control system for the classic E-Type Jaguar. These cars were made from 1961 - 1973, They are notorious for poor ventilation. We have computer modeled the components for ducting air to the windscreen, fascia and floor that have actuator controlled dampers for modulation. We have incorporated sensors for cabin and outside air temp and humidity....

    $1175 (Avg Bid)
    $1175 Avg Bida
    11 bida

    Customised brand logo at bootup, Disable access to everything except media playback page, Disable power button, enable volume limiter, etc.

    $64 (Avg Bid)
    $64 Avg Bida
    7 bida

    Choose frameless motor (brushless alternating current AC type. Inrunner) with negative temperature coefficient NTC thermistor fitted into the stator winding, harmonic drive module (other naming is strain wave gearhead) that reduces rotation speed RPM and increases motor torque, bearings, hollow shaft to use for laying the cables to connect to another servo drive joint. Conceptual drawing or prefer...

    $288 (Avg Bid)
    $288 Avg Bida
    4 bida

    I have made a PMaSynRM and a FSCWIPM (Distributed -v- concentrated wound) machines. We need to comparison them for Same magnet mass, Same fill factor, Same rotor topology? If not quantify and justify reason and Design for same average torque capability Compare Torque ripple and cogging EMF harmonics Iron loss DC winding loss Winding type in distributed –v- concentrated –...

    $193 (Avg Bid)
    $193 Avg Bida
    10 bida

    There are three total assignments but you can choose only one to do. (No need to do all 3) #1: Create a simulation for user-inputted moments of inertia and angular velocity vector in the principal body frame, it creates an animation of the attitude motion in a Torque-Free environment for a box with respect to an inertial frame. Assume that angular momentum is aligned with the 3rd axis of the inert...

    $103 (Avg Bid)
    $103 Avg Bida
    10 bida

    I received a request from a community group in South Manchester to build them a Plastic Shredding machine that would allow them to recycle plastic waste. As a qualified mechanical engineer and someone who has had many years’ experience both commissioning and repairing electro mechanical systems I agreed to take on the project. The project has been completed and the shredder is working well, ...

    $217 (Avg Bid)
    $217 Avg Bida
    3 bida

    We need to gather information from several websites. The sites to scrap are detailed as follows: - [log masuk untuk melihat URL] - [log masuk untuk melihat URL] - [log masuk untuk melihat URL] - [log masuk untuk melihat URL] - [log masuk untuk melihat URL] - [log masuk untuk melihat URL] NOTES: - We want a python or java process to process the detailed sites. - The process should be called by com...

    $296 (Avg Bid)
    $296 Avg Bida
    8 bida

    This arm will need to be 3D printed. In PLA material. Nema motors will be used. So you will have to make the cavity of the motors. (More information by chat). First you must calculate the necessary torque of the nema motors (within the simulation in Solidworks). And you will have to tell me what will be the necessary torque for me to know if I choose Nema 17 or Nema 23. The budget is not 10 USD....

    $30 (Avg Bid)
    $30 Avg Bida
    4 bida

    Requirements Closed-loop control system for Electric Bike: • The provided motor as an actuator • sensor to measure the controlled variable (torque) • reference input (step, or ramp) • A PID controller

    $31 (Avg Bid)
    $31 Avg Bida
    7 bida

    The project involves a Arduino sketch and a Android GUI. Includes 1- ESP8266/ESP32 Module. 1- BMP280, 3- MAX6675's. 1-Optocoupler, and 1- HX711 sensor. Basically the BMP280 is for ambient air temp and altitude, the 3 Max6675 for intake, exhaust, and oil temp. The optocoupler for RPM. The HX711 For torque. The sketch would collect the data. send to serial. and output the readings to the GUI v...

    $273 (Avg Bid)
    $273 Avg Bida
    18 bida

    I need you to design a torque tube in abaqus which is already given in a paper. I am attaching the paper for your reference. I also have the umat file for the material model coded you just need to model the torque tube andapply out the boundary condition. Please note that I would be needing the inp files and would be quite helpful if the job is done by Friday or almost Saturday. I am attaching the...

    $10 (Avg Bid)
    $10 Avg Bida
    4 bida
    Trophy icon Solar Advertisement Tamat left

    Needing an advertisement done up for my electrical business installing solar. I have 3 packages to choose from, bronze, silver and gold. Needing something done up within a reasonably fast time, chasing ideas and will be a quick smooth process. I require the following on the advertisement, 1- my company logo 2- ABN (bottom of previous advertisement 3- Clean energy council license no- A9913347 4- Cl...

    $77 (Avg Bid)
    Dijamin
    $77
    66 penyertaan

    We are only interested in talking to a freelancer that is an aeronautical engineer with propeller hub design experience. We would like the design to be mechanical and electrical (not hydraulic). It will use 12 V DC for the power. We would like the propellers to be able to provide reverse thrust in the design. The hub design needs to be enclosed because of the application being used on airboats. A...

    $602 (Avg Bid)
    $602 Avg Bida
    12 bida

    I need someone professional in Abaqus to model a total of 35 cases including 25 beams + 10 parametric studies. The objective is to verify the experimentally obtained results and extract the required relationships and find or compare the findings with the experimental and/or theoretical ones. Keywords: Torsion, FRP bars and stirrups, steel bar and stirrup, high-strength concrete, hollow box girder...

    $507 (Avg Bid)
    $507 Avg Bida
    8 bida

    I need a design for a M.S Shed for the purpose of poultry of area 12500 Square Feet. The dimensions must be 25 to 30 feet in width and 470 to 500 feet in length. The height on both sides must be 6 feet and Height at center must be 10 feet. The roof should be covered with asbestos sheets. There should be atleast 2 feet of roofing sheet over hanging on both sides for the purpose to avoid the rain wa...

    $182 (Avg Bid)
    $182 Avg Bida
    9 bida
    Web scraping Tamat left

    We need to gather information from several websites. The sites to scrap are detailed as follows: - [log masuk untuk melihat URL] - [log masuk untuk melihat URL] - [log masuk untuk melihat URL] - [log masuk untuk melihat URL] - [log masuk untuk melihat URL] - [log masuk untuk melihat URL] NOTES: - We want a python or java process to process the detailed sites. - The process should be called by com...

    $582 (Avg Bid)
    $582 Avg Bida
    39 bida

    Looking to recruit building, roofing, asbestos and snagging surveyors from across the UK for freelance surveys in your area. We provide Surveyors to all parts of the UK and due to demand require more surveys than we have staff. Require surveys in all parts of the UK. Please get in touch if you are a building surveyor and have any spare capacity to carry out surveys on our behalf. We will provide a...

    $699 (Avg Bid)
    Tempatan
    $699 Avg Bida
    2 bida
    Trophy icon develop a new business logo Tamat left

    "Dutch Reman " is a new sales platform for B2B clients who are repairing automatic transmissions for light vehicles . We needs a logo that represents our clients and our business ( Remanufacturing torque converters) Logo for "DUTCH REMAN" Our core business is the repair of torque converters. This is a part of the automatic transmission in a car. Our B2B clients send thi...

    $89 (Avg Bid)
    Dijamin
    $89
    689 penyertaan

    Using this temp website colour scheme, - [log masuk untuk melihat URL] I'll like a company's Tri-Fold flyer(s), business cards and brochures - all. The photos used MUST be royalty Free and should add to the service been explained. The company office the following Services Their services include: Water Damage Remediation Blackwater & Sewage Backup Cleanup Mold Removal & Mold Rem...

    $98 (Avg Bid)
    $98 Avg Bida
    70 bida

    Company that carries out asbestos removal and small demolition works. The Company’s name Asbest en Sloopwerk Blancquaert (needs to be under the heading logo - in smaller type) (A.S.B - heading logo) I would like a few different designs ( color etc)

    $35 (Avg Bid)
    $35 Avg Bida
    61 bida

    Im looking to conduct a finite element analysis on a pair of helical gears to calculate the contact pressure using ABAQUS. please have a look at the attached images of the gear I constructed. I'll provide the files and torque conditions after I hire. Once the FEA analysis is done, I need screen shots of all the steps taken to carry out the analysis. I'm specifically looking for a freela...

    $110 (Avg Bid)
    $110 Avg Bida
    3 bida

    Im looking to conduct a finite element analysis on a pair of helical gears to calculate the contact pressure using ABAQUS. please have a look at the attached images of the gear I constructed. I'll provide the files and torque conditions after I hire. Once the FEA analysis is done, I need screen shots of all the steps taken to carry out the analysis. I'm specifically looking for a freela...

    $103 (Avg Bid)
    $103 Avg Bida
    9 bida

    Run 2d simulation for a new axial flux motor design (I will provide 3D CAD model , and define materials). Tasks: 1) set up the model 2) Magnetic fields for no-load, and full load conditions at rated speed for two winding 3) Motor parameter calculations for a full load, for one turns per coil value 4) Losses Calculation at rated speed, for max continuous power, and peak power, one turns per c...

    $1127 (Avg Bid)
    $1127 Avg Bida
    4 bida

    I need a asbestos report and lead paint report for a new restaurant in Denton

    $815 (Avg Bid)
    $815 Avg Bida
    15 bida