Usb cnc controllerpekerjaan

Tapis

Carian terbaru saya
Tapis melalui:
Bajet
hingga
hingga
hingga
Jenis
Kemahiran
Bahasa
    Status Pekerjaan
    9,694 usb cnc controller tugasan ditemui, harga dalam USD

    IAR Workbench Project. We will use only this format to exchange the code. Entire code on video is running of MSP430F2013 - part of Development USB Sticks. The one showing on video with flashing light. The code is working- the issue is I need external FROM chip where you have to generate the program pages - to download only as required. MSP430F2013 has

    $626 (Avg Bid)
    Ditampilkan
    $626 Avg Bida
    4 bida
    Product Development 6 hari left
    DISAHKAN

    I am looking for assistance in developing a product. It is similar to a folding knife, but with two folding tools. The major components need to be CNC machinable.

    $425 (Avg Bid)
    $425 Avg Bida
    19 bida
    Controller Midi keyboard 6 hari left
    DISAHKAN

    ATTENTION ONLY PERSONS RESPONSIBLE! Must enter protocols and MIDI programming This project consists in making a 49-key Midi controller with speed, operation, parameter editing and midi messages, eeprom to store 128 user banks, 7-segment LED display 3 columns, more details in private Details in private.

    $214 (Avg Bid)
    $214 Avg Bida
    6 bida

    ...design must be compatible with SolidWorks. The design must also be something that is both functional and something I can build with the tools I have available. I don't have a CNC but I do have a metal lathe with a mill attachment. Here are the basic parameters of the butterfly valve: - Female fitting, both ends - 1.25" inside diameter, both ends - must

    $198 (Avg Bid)
    $198 Avg Bida
    32 bida

    I need the following setup for my pump system: High torque motor ( stepper? ) connected to control box on which I should have a knob rotating it to adjust RPM from 20 to 200. It should have display showing how many ml/m of liquid it pushes (using formula RPM x ml/rev so I need to set it up somehow into the memory), Also I need safety feature that if pump stuck and motor cant turn it makes sound....

    $531 (Avg Bid)
    $531 Avg Bida
    4 bida

    Hi, I am looking for a coder to write a script to use usb ports remotely.

    $230 (Avg Bid)
    $230 Avg Bida
    2 bida

    Hi I want someone to write a script to use USB ports remotely. More details via chat. Should have experience with Orangepi, Linux, Armbian

    $150 (Avg Bid)
    $150 Avg Bida
    1 bida
    Sim controller switch on/off 5 hari left
    DISAHKAN

    I need an Android app. I would like it designed and built. In particular the solution should consist in one app interfaced to a remote circui...an Android app. I would like it designed and built. In particular the solution should consist in one app interfaced to a remote circuit with a sim card connected to a controller that controls a switcher .

    $245 (Avg Bid)
    $245 Avg Bida
    28 bida

    ...be the same, you could be writing on the '10 Best Gifts For Potterheads' for Buzzfeed in the morning, with a casual narrative and style, while ending the day with 'IIOT For CNC Machines - Dealing With Cyber-Security Threats' for AmericanMachinist. 3) You need not possess any technical understanding of the subject-matter in hand, since our editors will

    $335 (Avg Bid)
    $335 Avg Bida
    33 bida

    ...content. Because we will have a lot of professional content concerning materials, manufacture processes and methods, experts are preferred if s/he has some knowledge about CNC machining, molding, 3D printing, and chemical knowledge. We understand that "the difference between the almost right word and the right word is really a large matter -it's

    $399 (Avg Bid)
    $399 Avg Bida
    5 bida

    We want to use usb ports remotely We want a server - client architecture. Server is an Orange Pi device with an usb port running Armbian. Client will run on Win7 and Win10. Server is accesible over internet has a port open. Server and client software should be controlled via API. Main goal of the project is when any usb device is physically attached

    $1499 (Avg Bid)
    $1499 Avg Bida
    7 bida

    ...be the same, you could be writing on the '10 Best Gifts For Potterheads' for Buzzfeed in the morning, with a casual narrative and style, while ending the day with 'IIOT For CNC Machines - Dealing With Cyber-Security Threats' for AmericanMachinist. 3) You need not possess any technical understanding of the subject-matter in hand, since our editors will

    $340 (Avg Bid)
    $340 Avg Bida
    26 bida

    The goal is to construct programs (in C language) that implement a controller, one for each of 2 black boxes. The purpose of these control programs is to make the output of the black box remain within in a certain range past a certain number of iterations. If an input value of 0 is supplied to the black boxes at each iteration, the output after 1000

    $30 (Avg Bid)
    $30 Avg Bida
    3 bida

    I need a full time designer who can create beautiful designs for CNC Cutting. We have lots of work available and work will last for a long time. You need to be creative and fast. The first job that needs to be completed is to create a design similar to the attached image. A Fresh photoshop document is required for each letter of the alphabet and a

    $3 / hr (Avg Bid)
    $3 / hr Avg Bida
    6 bida

    Overall project. Generate Primary Keys on the windows PC and store in a raspberry Pi 3 via USB serial port. Python programming. Interface and data storage display of the primary keys.

    $516 (Avg Bid)
    $516 Avg Bida
    10 bida

    I need to implement SOD for a customer using JDE E1 9.1

    $15 - $25 / hr
    $15 - $25 / hr
    0 bida
    catia&solid work 3 hari left

    modeling and cnc programmer and operator

    $131 (Avg Bid)
    $131 Avg Bida
    8 bida

    Hi, I need a vector pattern to be made in corel 17 file which will be used for cutting a sheet with cnc machine. 1. DESIGN TO BE PUT IN 3 BOXES (DIMENSIONS PROVIDED in IMAGE) 2. IT IS A FADING/GRADIENT PATTERN. ARROWS MARKED TO SHOW THE FLOW OF DESIGN. 3. HOUSE EXTERIOR IMAGE IS TO SHOW THE REQUIRED DESIGN. 4. ONE IMAGE SHOW THE EXAMPLE/ILLUSTRATION

    $21 (Avg Bid)
    $21 Avg Bida
    12 bida

    I need to link receipt printing of Odoo's POS to an USB Serial ESC command receipt printer on Android (click on a button on a webpage then send the command to the printer), the documentation of the printer has attached below, the SDK (.jar file) will be provided.

    $300 (Avg Bid)
    Ditampilkan
    $300 Avg Bida
    5 bida

    We need the DXF file for a simple image in attach. we need the DXF file for a CNC cutting metal.

    $24 (Avg Bid)
    $24 Avg Bida
    28 bida

    We do are using USB caller devices to show caller ID on the screen, at the moment we are using This product: [log masuk untuk melihat URL] Which has drivers to install virtual com port for this device. There is another USB device, which is USB HID, can you be able to create virtual port to transfer caller id info same as

    $609 (Avg Bid)
    $609 Avg Bida
    8 bida

    Hi, I need a new ASP.NET Core 2.0/2.1 MVC web project that will be converted from al...contact page should write to a MySql database and send e-mail. Update On 1202: Pages should be responsive Pages To Be Created: [log masuk untuk melihat URL] [log masuk untuk melihat URL] [log masuk untuk melihat URL] BR, Merve

    $95 (Avg Bid)
    $95 Avg Bida
    12 bida

    ...create a mobile app that can allow for a mobile phones/tablets to be used as a controller for Nintendo switch, PS4, Xbox One. We will need this done for both Apple and Android. Ideally the phone can connect to the Xbox/PS4/Nintendo switch via Bluetuth or worst case via USB. This is a serious project, and we are looking for quotes, and looking to begin

    $2420 (Avg Bid)
    $2420 Avg Bida
    39 bida

    ...simultaneous charge and act as a USB host using the OTG cable. Standard micro USB OTG cables have pin 4 and 5 shorted, and I think i will need to add a resistor between these pins, but that is not a problem. BACKGROUND: I am currently working on a project that requires both continuously powering an Android tablet through micro-USB port and using that same

    $186 (Avg Bid)
    $186 Avg Bida
    3 bida

    ...have been finalized and locked in, then detailed 3D model of the following is required: • Structural Detailing o Weldment Drawings o Cultists, BOM’s Etc o Profile cutsheets for CNC cutting o Machining Drawings o Each part requires a drawing, no combined drawings allowed. • Vessel Detailing o Detailed design drawing for manufacturing. • Piping Detailing

    $4303 (Avg Bid)
    $4303 Avg Bida
    19 bida

    Need a simple iOS App which will control Wifi or IR controlled devices through the RS232 and IR code(configurable ie, some button which accepts the code and perform based on that) function with the same as following the pseudo code from Android App. Attached Sample Android code, IR and RS232 code. Note: Already have developed an Android-app which will control devices through specific code. And...

    $248 (Avg Bid)
    $248 Avg Bida
    13 bida
    PID controller 20 jam left

    buiding a ring ball balancing plate using PID control on labview components used, MyRIO, resistive touch screen , 2 RC servo motors

    $150 (Avg Bid)
    $150 Avg Bida
    12 bida

    We do are using USB caller devices to show caller ID on the screen, at the moment we are using This product: [log masuk untuk melihat URL] Which has drivers to install virtual com port for this device. There is another usb device, which is USB HID, can you be able to create virtual port to transfer caller id info same as

    $308 (Avg Bid)
    $308 Avg Bida
    4 bida

    All types of program of machine manufacturing job

    $3 / hr (Avg Bid)
    $3 / hr Avg Bida
    13 bida

    I need to manufacture a CNC waterjet machine. Currently, just a concept and I need CAD designs to forward to manufacturers. If your able to help please contact me so we can discuss this further.

    $201 (Avg Bid)
    $201 Avg Bida
    40 bida

    ...simple commands (as long as the Raspberry pi provides appropriate authentication and that windows user has the rights to the file/executable.) - Raspberry Pi connects to PC via USB ONLY - no ethernet - Correct Data transfer cable is connected between PC and Raspberry Pi - A windows service is started and listens for a connection from the RPi - generated

    $571 (Avg Bid)
    $571 Avg Bida
    22 bida
    Trophy icon Beach house sign logo 1 hari left

    Would like a cartoon sea turtle wearing sunglasses and drinking a margarita on his back, resting his head on a conch shell. Caption to read "Conched Out". suitable for cnc etching on sign and shirt sublimation.

    $100 (Avg Bid)
    $100
    13 penyertaan

    ...we sell controllers for CNC machines that run the Open-Source Smoothieware firmware. We also contribute to the continued development of the firmware, and are participating in the elaboration of the version 2 of the board and firmware for the Smoothieware project. As part of this, the project is aiming to move from USB/MSD to USB/MTP ( the same way Android

    $1575 (Avg Bid)
    $1575 Avg Bida
    12 bida

    We want to use usb ports remotely We want a server - client architecture. Server will be a rpi-like device with an usb port. Client will run on Windows OS. Server and client computers are accessible through LAN. Server and client software should be controlled via API. Main goal of the project is when any usb device is physically attached to pi, it

    $540 (Avg Bid)
    $540 Avg Bida
    12 bida
    Vba 2d nesting Tamat left

    I have software for producing cabinet doors designed in vba. I would like to have a 2d nesting program that I could integrate. You should enter materials and part to ...to have a 2d nesting program that I could integrate. You should enter materials and part to be nested. I would like to be able to save the nested sheets and export gcode for Cnc router

    $460 (Avg Bid)
    $460 Avg Bida
    12 bida

    We need a simple controller using Microcontroller or any cheap controller EXCEPT Arduino & PC software (*.exe) for configuring the controller i.e. setting name, output delay, output action (On/OFF, PWM freq., PWM duty cycle, what output pin will be operated when any input switch turned off or on ,…etc). with the following A. functions: 1. The min.

    $609 (Avg Bid)
    $609 Avg Bida
    11 bida

    Hi, ongoing daily basis programing for cnc router works. I'm looking for someone to do cutting programs for cnc router. payment will be on an hourly rate. please message me for more details.

    $5 / hr (Avg Bid)
    $5 / hr Avg Bida
    21 bida

    install LAN for CNC-Router as enclose and follow instruktion as enclose for program setting. The "Netzwerkkarte" Network card, must also has a automatic Crossover, you please check.

    $42 (Avg Bid)
    $42 Avg Bida
    6 bida

    The ...know what kind of filter and amplifier to use to get the output of the photodiode, the output is processed by the micro controller from the two photodiodes and their ratio calculated and if above a certain threshold the micro controller can light up an LED or LCD with warning. The infrared emitter needs to be controlled with the microcontroller

    $102 (Avg Bid)
    $102 Avg Bida
    9 bida

    I need a Linux-based proxy controller/forwarded that will take requests from users, and use a proxy from our database to relay it. Preferably, you would use something out-of-the-box like Squid Proxy Server and modify it to achieve the below. ============================ DB STRUCTURE ============================ Sample DB structure: http://104.200

    $530 (Avg Bid)
    $530 Avg Bida
    8 bida

    ...create a mobile app that can allow for a mobile phones/tablets to be used as a controller for Nintendo switch, PS4, Xbox One. We will need this done for both Apple and Android. Ideally the phone can connect to the Xbox/PS4/Nintendo switch via Bluetuth or worst case via USB. This is a serious project, and we are looking for quotes, and looking to begin

    $1500 (Avg Bid)
    $1500 Avg Bida
    35 bida

    I have this small program that runs with a dongle. It is a hassle. Need to run it without a dongle.

    $42 (Avg Bid)
    $42 Avg Bida
    2 bida

    Bluetooth Printer setup in Unity Game . Unity Expert Required.

    $120 (Avg Bid)
    $120 Avg Bida
    3 bida

    Ok I know how its done with debian but debian uses live-boot which already has the feature where in Ubuntu it used capser I need to patch capser to make it ask for password of an encrypted persistent casper-rw file and mount it as persistence storage I followed this link [log masuk untuk melihat URL] then modified my install xubuntu but after building the iso it only asks for password but it wo...

    $175 (Avg Bid)
    $175 Avg Bida
    4 bida

    We want to use a micro-controller with Arduino, please contact for details

    $344 (Avg Bid)
    $344 Avg Bida
    26 bida

    I need a developer that understand python, openflow, and mininet. I have done some of the work. Still there is some other parts that need a real programmer.

    $116 (Avg Bid)
    $116 Avg Bida
    3 bida

    ...LION cells terminated via 8mm.015mm nickel strips (ideally with low temperature solder or spot weld to board). • USBC input port for DC power to charge with USBC Charge controller • Down conversion to 5V and breakout to Arduino headers • Adruino charge monitoring • Arduino switchable optical (ideally) relay to disable load until enabled The PCB is

    $938 (Avg Bid)
    $938 Avg Bida
    25 bida

    Need to implement CCP protocol in dsPic33F MCU to capture can frames coming in and to store simultaneously on to USB Hardware support will be provided

    $263 (Avg Bid)
    $263 Avg Bida
    6 bida