Tapis

Carian terbaru saya
Tapis mengikut:
Bajet
hingga
hingga
hingga
Jenis
Kemahiran
Bahasa
    Status Pekerjaan
    755 zigbee tugasan ditemui, harga dalam USD

    Thank you for reading. We have a project to develop a fall detector using Bluetooth or Zigbee technology using pre-defined hardware. It is for an emergency help call and fall detection product. The project will be to: 1. Find a suitable fall detection algorithm 2. Implement it on the NRF52832 chipset 3. Test and confirm it works well. there are plenty of algorithms out there in research papers etc, we dont want the freelancer to create their own algorithm. key requirements are low power usage. We can provide all items for the development platform. Please reply with your experience in iOT, G sensor/accelerometers an Bluetooth or Zigbee

    $864 (Avg Bid)
    $864 Avg Bida
    6 bida

    We are looking for an experienced and skilled person who can develop the firmware for commercialization in an agricultural and city parks environment. *** PRODUCT SUMMARY *** - Consists of TWO types of devices: 'Gateway', which is an Internet-facing (WiFi) device communicating with the API, and 'Nodes' between 20-50x communicating with the Gateway via the on-premises mesh network (ZigBee) - Both Gateway and Node are almost identical in hardware components and design; both use their respective I/O channels to operate agricultural sensors or irrigation valves. - Customers will DIY their devices on their farm by connecting to each device's Bluetooth and providing the device with what it takes to join an existing on-premises WiFi network or existing lorawwan ...

    $1163 (Avg Bid)
    $1163 Avg Bida
    18 bida

    ...types of devices: the "Gateway" which is a Internet-facing (WiFi) device which communicates with API, and, anywhere from 20-50x "Nodes" communicating with the Gateway via a on-site mesh network (ZigBee) - Both Gateway and Node are virtually identical in hardware components and design, where both utilise their respective I/O channels to either operate agricultural sensors or irrigation valves - Customers will DIY setup their devices on their farms, by connecting to each device's Bluetooth and providing the device with whatever is required to either join an existing on-prem WiFi network or existing ZigBee mesh network (from a previously setup Gateway) - Customers interact with the devices via a mobile application (React Native app) where they oper...

    $853 (Avg Bid)
    $853 Avg Bida
    17 bida

    ...of devices: the "Gateway" which is a Internet-facing (WiFi) device which communicates with Web API, and, anywhere from 20-50x "Nodes" communicating with the Gateway via a on-site mesh network (ZigBee) - Both Gateway and Node are virtually identical in hardware components and design, where both utilise their respective I/O channels to either operate agricultural sensors or irrigation valves - Customers will DIY setup their devices on their farms, by connecting to each device's Bluetooth and providing the device with whatever is required to either join an existing on-prem WiFi network or existing ZigBee mesh network (from a previously setup Gateway) - Customers interact with the devices via a mobile application (React Native app) where they operat...

    $3198 (Avg Bid)
    $3198 Avg Bida
    28 bida

    I need CC2530 firmware can work with ZHA installed on Homeassistant. I have CC2530 Z-stack firmware but I have some problems. I can't connect the device to ZHA. My firmwre works well with my custom coordinator. I can provide my firmware.

    $537 (Avg Bid)
    $537 Avg Bida
    11 bida

    I am looking for expert of mesh network. please bid freelancer that have only plenty experience. Regards.

    $647 (Avg Bid)
    $647 Avg Bida
    5 bida

    I have a project that requires using Silabs MGM210P Mighty Gecko Modules to provide a Zigbee network to collect data. The System on Chip (SOC) code for the Coordinator and the Router is required using Simplicity Studio 5 The Silabs MGM210P Mighty Gecko Modules is to be used for the Coordinator and the Router The Router module functions are 1) Power up 2) Connect to the Coordinator 6) Send a custom packet of data to the Coordinate 7) Receive acknowledge from Coordinator 8) Wait 10 seconds Repeat process The Coordinator module functions are 1) Connect to the Router and form a network when the router powers up 2) Receive the data packet from the Router 3) Respond to the Router with Acknowledgement data packet 4) Output packet on the serial port / usb 5) Wait for next packet Simpl...

    $347 (Avg Bid)
    $347 Avg Bida
    9 bida

    ...and processes across various cybersecurity areas. -Experience in Software Composition Analysis (SCA) / Static Application Security Testing (SAST) / Dynamic Application Security Testing (DAST) tools, secure coding objectives and principles, vulnerability classification scoring and ranking systems -Implementing PKI infrastructure/Cryptographic Keys, secure boot, secure communications (BLE, WiFi, Zigbee, etc.), Identity management, secure firmware Development, secure firmware updates & patch management, configuration management -Hardening security for binary executable loaded on the device, memory protection process -Knowledge on Internal communications Protocols, Open ports, JTAG debugging, Exacting Firmware from EEPROM /FLASH memory, Tampering -Binary Analysis, Reverse Enginee...

    $8 / hr (Avg Bid)
    $8 / hr Avg Bida
    6 bida
    Zigbee CC2530 Tamat left

    hello we need the modification code for cc2530 Zigbee concerning this adaptation software for announcement in protocol for keypad

    $110 (Avg Bid)
    $110 Avg Bida
    2 bida

    Hi Chirag J., I noticed your profile concerning the cc2530 Zigbee we need the modification software did you have the module ?

    $10 (Avg Bid)
    $10 Avg Bida
    1 bida

    Hi guys, starting from my PHP Laravel project I would like to be able to turn on a light bulb or switch, currently I have bought a switch from amzon that through SMARTLIFE or TUYA manages to turn the switch on / off, I would like to be able to communicate with this switch using some web service or http call? My goal is that through my php application I can press a button and turn the switch on / off.

    $165 (Avg Bid)
    $165 Avg Bida
    41 bida

    I have a project that requires using Silabs MGM12P Mighty Gecko Modules to provide a Zigbee network to collect data. One MGM12P is to be the Zigbee Coordinator and collect data from the MGM12P module configured as a Zigbee End Device. The End Device module functions are 1) Wake up 2) Connect to The Coordinator 3) Read 2 Analog Values on analog inputs 4) Read Battery Voltage 5) Read Device MAC address 6) send a packet with all of the above information 7) Receive acknowledge from Coordinator 8) go to sleep for 10 minutes Repeat process The Coordinator module functions are 1) Connect to the End Device when it wakes 2) Receive the packet for End Device 3) Respond to End device with Acknowledgement 4) Output packet on the serial port / usb 5) Wait for next connection...

    $395 (Avg Bid)
    $395 Avg Bida
    7 bida

    ...implement it. I wanted to understand more about the hardware and firmware used to build a Z-wave network. I already have a PCB board designed for manufacturing but this needs another, better version of the board and I'll need to understand if my objectives with this board are possible. My goal is to understand and create a PCB using ESP32 chip acting as the brain, allowing me to program attached zigbee and zwave chips that will broadcast signal, connect to respective devices, send and receive commands from those devices. Also onboard the ESP32 which has wifi and BLE integrated allowing me to send and receive those messages/commands to the Cloud. The only aspect I'd like to focus on here though is the full PCB integration of ESP32 and those chips, if something like this ...

    $48 / hr (Avg Bid)
    $48 / hr Avg Bida
    7 bida

    ...implement it. I wanted to understand more about the hardware and firmware used to build a Z-wave network. I already have a PCB board designed for manufacturing but this needs another, better version of the board and I'll need to understand if my objectives with this board are possible. My goal is to understand and create a PCB using ESP32 chip acting as the brain, allowing me to program attached zigbee and zwave chips that will broadcast signal, connect to respective devices, send and receive commands from those devices. Also onboard the ESP32 which has wifi and BLE integrated allowing me to send and receive those messages/commands to the Cloud. The only aspect I'd like to focus on here though is the full PCB integration of ESP32 and those chips, if something like this ...

    $51 / hr (Avg Bid)
    $51 / hr Avg Bida
    6 bida

    Hi Viswanathan R., I noticed your profile and would like to offer you my project. We can discuss any details over chat. we have to write a micropyhton code and integrate a zigbee gateway so that the data can be sent to Digi Remote manager, plant is at Puducherry and the job entails going to plant for 4 to 5 days , travel and stay will be paid by us

    $368 (Avg Bid)
    $368 Avg Bida
    1 bida

    Hi Narayanan Nampoothiri K., I noticed your profile and would like to offer you my project. We can discuss any details over chat. we have to write a micropyhton code and integrate a zigbee gateway so that the data can be sent to Digi Remote manager, plant is at Puducherry and the job entails going to plant for 4 to 5 days , travel and stay will be paid by us

    $368 (Avg Bid)
    $368 Avg Bida
    1 bida

    Hi Sumit K., I noticed your profile and would like to offer you my project. We can discuss any details over chat. we have to write a micropyhton code and integrate a zigbee gateway so that the data can be sent to Digi Remote manager, plant is at Puducherry and the job entails going to plant for 4 to 5 days , travel and stay will be paid by us

    $368 (Avg Bid)
    $368 Avg Bida
    1 bida

    Hi Shanmugaraj K., I noticed your profile and would like to offer you my project. We can discuss any details over chat. we have to write a micropyhton code and integrate a zigbee gateway so that the data can be sent to Digi Remote manager, plant is at Puducherry and the job entails going to plant for 4 to 5 days , travel and stay will be paid by us

    $368 (Avg Bid)
    $368 Avg Bida
    1 bida

    Hi Narender S., I noticed your profile and would like to offer you my project. We can discuss any details over chat. we have to write a micropyhton code and integrate a zigbee gateway so that the data can be sent to Digi Remote manager, plant is at Puducherry and the job entails going to plant for 4 to 5 days , travel and stay will be paid by us

    $368 (Avg Bid)
    $368 Avg Bida
    1 bida

    Hi Arumugam P., I noticed your profile and would like to offer you my project. We can discuss any details over chat. we have to write a micropyhton code and integrate a zigbee gateway so that the data can be sent to Digi Remote manager, plant is at Puducherry and the job entails going to plant for 4 to 5 days , travel and stay will be paid by us

    $368 (Avg Bid)
    $368 Avg Bida
    1 bida

    Hi Amburose Sekar S., I noticed your profile and would like to offer you my project. We can discuss any details over chat. we have to write a micropyhton code and integrate a zigbee gateway so that the data can be sent to Digi Remote manager, plant is at Puducherry and the job entails going to plant for 4 to 5 days , travel and stay will be paid by us

    $368 (Avg Bid)
    $368 Avg Bida
    1 bida

    Hi Prakash A., I noticed your profile and would like to offer you my project. We can discuss any details over chat. we have to write a micropyhton code and integrate a zigbee gateway so that the data can be sent to Digi Remote manager, plant is at Puducherry and the job entails going to plant for 4 to 5 days , travel and stay will be paid by us

    $368 (Avg Bid)
    $368 Avg Bida
    1 bida

    I connected a Tuya Zigbee Smart Switch with a Tuya Zigbee(3.0) Wireless Gateway through Smart Life App, and it works perfectly with the app (ON/OFF). I need someone to help me to control the same Tuya Smart Switch with my ESP8266 through the Tuya Zigbee Gateway, without using the Smart Life App. (ESP8266 and Tuya Zigbee Gateway are connected to the same wifi network, so there is no need for internet) So the command should go from my ESP8266, to the router, to Tuya Zigbee gateway to the Smart switch, as shown in the attachment. If you do not have the Tuya hardware, you can connect to my Computer using Anydesk to download to my esp8266, then we can check it if it works with Tuya

    $465 (Avg Bid)
    $465 Avg Bida
    13 bida
    Android App Tamat left

    We currently have 4 different Android apps that we want to combine into one. I have attached 20 of the apps. They were written by someone with little experience and have various bugs. The GUI is also very messy. The app is intended to setup and control Zigbee enabled luminaires with a Mesh network. Please bid "I saw" as the first sentence. Otherwise, your bid will be ignored.

    $569 (Avg Bid)
    $569 Avg Bida
    83 bida

    I connected a Tuya Zigbee Smart Switch with a Tuya Zigbee(3.0) Wireless Gateway through Smart Life App, and it works perfectly with the app (ON/OFF). I need someone to help me to control the same Tuya Smart Switch with my ESP8266 through the Tuya Zigbee Gateway, without using the Smart Life App. So the command should go from my ESP8266 to the gateway to the Smart switch, as shown in the attachment

    $158 (Avg Bid)
    $158 Avg Bida
    7 bida

    I connected a Tuya Zigbee Smart Switch with a Tuya Zigbee(3.0) Wireless Gateway through Smart Life App, and it works perfectly with the app (ON/OFF). I need someone to help me to control the same Tuya Smart Switch with my ESP8266 through the Tuya Zigbee Gateway, without using the Smart Life App. So the command should go from my ESP8266 to the gateway to the Smart switch.

    $210 (Avg Bid)
    $210 Avg Bida
    7 bida

    I connected a Tuya Zigbee Smart Switch with a Tuya Zigbee(3.0) Wireless Gateway through Smart Life App, and it works perfectly with the app (ON/OFF). I need someone to help me to control the same Tuya Smart Switch with my ESP8266 through the Tuya Zigbee Gateway, without using the Smart Life App. So the command should go from my ESP8266 to the gateway to the Smart switch.

    $181 (Avg Bid)
    $181 Avg Bida
    7 bida

    I connected a Tuya Zigbee Smart Switch with a Tuya Zigbee(3.0) Wireless Gateway through Smart Life App, and it works perfectly with the app (ON/OFF). I need someone to help me to control the same Tuya Smart Switch with my ESP8266 through the Tuya Zigbee Gateway, without using the Smart Life App. So the command should go from my ESP8266 to the gateway to the Smart switch.

    $23 (Avg Bid)
    $23 Avg Bida
    6 bida

    This is a proje...is a project for using an Arduino module and interfacing to Wi-Fi, BLE and ZigBee. The designer must chose a suitable radio module with performance at a good price. The designer must include all schematics, net list, bill of material. Upon receipt, our company will send the PCB order to the automated system of JLCPCB and if the order is accepted as being in a state to produce, then we will pay the freelancer. Small minor adjustments to component placement may be required after or review. This is part of the project as it is well known that items may arise that need adjustment. Consideration may also be given to the Freelancer on other projects to include software interface to the radio devices (Wi-Fi, BLE, and Zigbee) R.F. experience would be an advantage to...

    $186 - $558
    Dimeterai Perjanjian Kerahsiaan
    $186 - $558
    26 bida

    PCB design, manufacture and firmware programming for a heating controller. It will involve multiple inputs and outputs, both digital and analogue, NTC,0-10v, pulse, CT, on-off, power supply, separate high quality touch screen controller, 8 gig SD storage, Modbus master, Lora, Zigbee (connection to Sonoff sensors), Wi-Fi and LAN. It must connect to a website for analysis of data and the ability to upload data and download instructions and update the firmware through the internet. The project will also include the development of the firmware, website apps ect. I do have a precious version written in C as an example. A full description of the firmware will be supplied after a NDA is signed.

    $3540 (Avg Bid)
    $3540 Avg Bida
    45 bida

    I am looking for a professional Atmel firmware engineer with experience in Zigbee protocol. Our custom board is designed to send data over Zigbee. The other parts are working great. We just have an issue in Zigbee communication. It is mainly related with the Zigbee message packet. I can provide with the existing Atmel source code. The task is to review the existing project and resolve the Zigbee communication issue. Only apply if you have experience with Zigbee. To prove that you are serious, please start your proposal with a word "zigbee".

    $159 (Avg Bid)
    $159 Avg Bida
    11 bida

    ...charge an SLA (Sealed lead acid battery) Common in the alarm industry. The design must include supervision of the battery. I.E: Low battery at 10 Volts and no battery. An additional driver is needed to power as much as 3.0 amp. at 13.68 volts D.C to act as an siren driver. The Arduino must have Wi-Fi and Bluetooth to communicate with a local cell phone. Additionally the motherboard shall act as a ZigBee hub to connect to nearby sensors such as motion detectors, door/window contacts, water sensors, Fire, smoke etc. We also require 16 inputs to connect to the Arduino to act as connections from existing hardwired alarm contact inputs that may be Normally Closed, Normally opened with E.O.L. supervision resistors, as well as N/C with either 1K, 5.6K and 2K Ohm. The overall PCB form di...

    $389 (Avg Bid)
    $389 Avg Bida
    49 bida

    Part1- Assembling/testing one of Lora/Zigbee/ESB mode hardware

    $50 (Avg Bid)
    $50 Avg Bida
    1 bida

    We are looking for a developer for project work who can integrate ZigBee devices into our smart home system. Linux, .net, C knowledge required.

    $2612 (Avg Bid)
    $2612 Avg Bida
    33 bida

    Implementation and testing of data fusion algorithms in wireless sensor networks. - Implement: Wireless network algorithms with LoRa protocol, ZigBee protocol and Enhanced ShockBurst protocol. - A wireless node that transmits data to a base station through the LoRa protocol, a node that transmits data to a base station through the ZigBee protocol, and a node that transmits data to a base station through the Enhanced ShockBurst protocol will be implemented. - The LoRa node will be based on the Arduino MKR WAN 1310 transceiver development board, the ZigBee node will be based on the Arduino Nano Every development board and the XBEE transceiver and the ShockBurst node will be based on the Arduino Pro Mini development board and the nrf24L01 + transceiver. The implemen...

    $196 (Avg Bid)
    $196 Avg Bida
    6 bida

    Ready to go platform that supports major protocols like zwave and zigbee Scalable and have deployed already Needs full team to link to mqtt and apps and front end

    $119985 (Avg Bid)
    $119985 Avg Bida
    23 bida
    WSN in omnet++ Tamat left

    Develop a wireless sensor network scenario that comprises of 100 sensor nodes and a base station in a 100m x 100m environment. The base station would be placed at the coordinate (50,150). All sensor nodes are source nodes that is they generate information from the environment and send this information to the environment at intervals (for example 1 packet ever...environment at intervals (for example 1 packet every 10 seconds). The topology would be a hierarchical topology in which nodes are clustered and every node in a cluster is one hop away from the cluster head. The cluster head would then forward the information to the next cluster head closer to the base station or directly to the base station. The planned communication technology is Zigbee or 6LoWPAN (preferably Zigbee)...

    $165 (Avg Bid)
    $165 Avg Bida
    1 bida

    ...Encryption WAN security, VPN, Encryption, DMZ security: Proxy, Firewall servers. Mail and Web servers should be here Use of Cloud environment, public or private Wireless: You could include one or more wireless technology to your project in order to improve your enterprise network accessibility. Typical wireless technologies in an enterprise are WiFi, WiMAX, Cellular systems (LTE), Bluetooth, ZigBee, Wireless Local Loop (WLL), etc. Cloud Computing: You could consider to use a cloud system (either public or private) to enhance your enterprise network capability. Cloud environment could be deployed for your network and cloud services could be used for both your enterprise employee and/or for your customers. Based on your technical evaluation decide whether to go with the cloud or...

    $234 (Avg Bid)
    $234 Avg Bida
    15 bida

    having available a Raspberry PI 4, a conbee II key I would like to create the code to make the data of all the zigbee devices acquired by the system available on the modbus tcp server inside the raspberry.

    $387 (Avg Bid)
    $387 Avg Bida
    2 bida

    I would like an advice on which PLATFORM should I use to implement an upcoming project. I need to implement a home automation using Alexa, Remote patient monitoring and elderly care. I need to upload data from SPo2 meters, Heart pressure meters etc for remote patient monitoring. I will use emergency button wearable for elderly (BLE or Zigbee) . The target is to develop one mobile app that we can receive notifications (via cloud) for example if emergency button pressed. We should be able to read room temperature, lights, doors etc. Also is needed to develop a desktop app on which I could get analytics, for example how many times during week a specific motion detector was triggered, etc. Via this dashboard I should also to be able to read-display all sensor states. The freelan...

    $31 (Avg Bid)
    $31 Avg Bida
    1 bida

    I need to develop the zigbee mesh device using Xbee module for home automation system. I want to work with engineers who has experience about this fields. I worked with previous engineer by now. But he did not finished it. If necessary, you can build the system from the scratch.

    $24 / hr (Avg Bid)
    $24 / hr Avg Bida
    17 bida

    i need report and simulation. you have to do original and plagiarism free report. my topic is "Authentication design and implementation for ZigBee based IoT devices"

    $145 (Avg Bid)
    $145 Avg Bida
    2 bida

    i want long term employee. i need report +code. it should be own and plagiarism free report

    $52 (Avg Bid)
    $52 Avg Bida
    2 bida
    cryptography Tamat left

    i need report and simulation. you have to do original and plagiarism free report. my topic is "Authentication design and implementation for ZigBee based IoT devices"

    $113 (Avg Bid)
    $113 Avg Bida
    2 bida

    i need report and simulation. you have to do original and plagiarism free report. my topic is "Authentication design and implementation for ZigBee based IoT devices"

    $2 / hr (Avg Bid)
    $2 / hr Avg Bida
    2 bida

    i need report and simulation. you have to do original and plagiarism free report. my topic is "Authentication design and implementation for ZigBee based IoT devices"

    $116 (Avg Bid)
    $116 Avg Bida
    1 bida

    i need report and simulation. you have to do original and plagiarism free report. my topic is "Authentication design and implementation for ZigBee based IoT devices"

    $41 (Avg Bid)
    $41 Avg Bida
    2 bida

    i need report and simulation. you have to do original and plagiarism free report. my topic is "Authentication design and implementation for ZigBee based IoT devices"

    $62 (Avg Bid)
    $62 Avg Bida
    3 bida

    We are a small New Zealand based company who design and manufacture industrial LED lighting. We require an experienced Android developer to provide on going services for our app. General app development, involving Bluetooth and communicating with an external ESP32 device to control a Zigbee network, app GUI, also, porting app over from B4A to Kotlin. Please only apply if you are an experienced ANDROID developer.

    $20 / hr (Avg Bid)
    $20 / hr Avg Bida
    38 bida

    I am looking for a developer to work with that has experience building mobile apps for home automation. We are looking for someone that has experience with Z-Wave and Zigbee devices. If you have built an app that works with Zwave devices and can send me a link to it, that would be helpful. I would also look at any hub or cloud service to make this possible. Our app is currently written in flutter/dart but that is not a requirement. We can work around this if you do not know dart/flutter. I am looking for someone with experience. You MUST have experience with Z-Wave. With this project, all we want to do is a proof of concept. I want a mobile app with a button on it that when pressed will turn on a Z-Wave light bulb.

    $460 (Avg Bid)
    $460 Avg Bida
    8 bida