
Closed
Posted
Paid on delivery
Strict Requirement: NO AGENCIES. You must be an independent, individual freelancer. Overview Seeking an experienced electro-mechanical engineer for ongoing, on-demand pre-fabrication reviews of 3D mechanical layouts in SolidWorks. What You Receive (Per Task) Native SolidWorks assemblies & STEP exports. Concise design brief with product function and constraints. Key Review Areas Clearance and interference detection. Tolerance stack-up analysis. Fastener accessibility and assembly feasibility. Cabling paths and wire routing. Heat-sink placement and thermal management. Required Deliverables Marked-Up Assembly (or Red-Lines): Highlighted problem areas in SolidWorks with specific recommended fixes. Actionable Report: A brief summary of findings and engineering assumptions (no generic checklists). Handoff Call: A quick walkthrough so our team can implement your changes smoothly. Ideal Candidate Expert with SolidWorks interference detection, tolerance analysis, and motion study tools. Strong DFM (Design for Manufacturing) and real-world assembly insight. Engagement & Timeline Structure: Ongoing, as-needed tasks.
Project ID: 40751619
73 proposals
Remote project
Active 5 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
73 freelancers are bidding on average $118 USD for this job

Hello, I can review your SolidWorks assemblies and STEP exports for practical pre-fabrication issues, focusing on clearance and interference problems, tolerance stack-ups, fastener accessibility, assembly feasibility, cable routing, and heat-sink placement. The review will be based on the actual design and functional constraints rather than a generic checklist. I’ll provide marked-up SolidWorks red-lines with specific recommended fixes, along with a concise actionable report covering key findings and engineering assumptions. I can also join a short handoff call to walk your team through the issues and recommended changes. I work independently and can support the ongoing, on-demand review workflow. Thanks
$150 USD in 3 days
8.1
8.1

With years of experience in the field of Mechanical Engineering, focused on SolidWorks and other relevant software, I am the perfect match for your electro-mechanical engineering requirements. My proficiency in interference detection, tolerance analysis, and motion study tools in SolidWorks aligns seamlessly with your project needs. I understand the complexities involved in pre-fabrication layouts and can deliver efficient and thorough design reviews. My work philosophy revolves around attaining a high degree of DFM i.e., Design for Manufacturing. This approach to design ensures that not only are our blueprints technically sound but also economically viable, an essential aspect of any successful project. Being well-versed with cabling paths, heat-sink placement, and importance of thermal management further assure you that I can spot intricate issues with ease. A critical differentiator from other freelancers is my practical assembly knowledge that complements my theoretical expertise in SolidWorks. I don't just provide generic checklists; rather actionable reports which contain minimum engineering assumptions while providing ample findings to address all aspects mentioned in your key review areas. Additionally, conducting concise handoff calls to facilitate seamless implementation shows my commitment to deliverables. Thus, by choosing me you're opting for quality, depth, and experience all finely woven together
$82 USD in 2 days
7.9
7.9

As a dedicated and versatile professional, I assure you that my skills in 3D Design, 3D Modelling, and Product Design are perfectly aligned with your project requirements. Having worked extensively with SolidWorks, I have significant experience in interference detection, tolerance analysis, and motion study tools - enabling me to provide a comprehensive review of your 3D mechanical layouts.
$60 USD in 1 day
7.6
7.6

Hi, I reviewed your project requirements and I can help you develop a practical, production-ready solution—not just a visually complete CAD model. I’m a mechanical engineer with 13+ years of experience in product design, mechanical systems, CAD development, engineering analysis, and multidisciplinary coordination. Depending on the project, I can support concept development, detailed 3D modelling, assemblies, manufacturing drawings, BOMs, technical calculations, simulations, and fabrication-ready files. My focus is always on clear drawings, realistic detailing, manufacturability, and fast communication throughout the project. I work mainly with SolidWorks, AutoCAD, ANSYS, Revit, Fusion 360, and related engineering tools. You can review similar design and engineering work in my profile. Once I see the available drawings, dimensions, and expected deliverables, I can suggest the most efficient way to proceed. Best regards, Gökay Zaralı
$200 USD in 7 days
6.7
6.7

Hello, This is not an AI bid; this is a self response. Your on-demand SolidWorks prefabrication reviews need practical engineering judgment, not generic checklist feedback, and I can deliver focused assembly red-lines, actionable findings, and a clear handoff. I will apply 3D Design principles to inspect clearances, interference, fastener access, cabling, thermal management, tolerance risks, and manufacturability. My experience with 3D Rendering and 3D CAD supports precise review of native assemblies and STEP exports, with recommended fixes documented for efficient implementation. I can begin with your first assembly and return marked-up findings within the agreed task timeline, followed by a concise walkthrough. Which SolidWorks version and tolerance standards should be used for the initial assembly review? Best regards, Sahil
$30 USD in 1 day
6.8
6.8

Hello, I am an independent electro-mechanical engineer with extensive experience reviewing SolidWorks assemblies, STEP models, and production designs for clearance, tolerance, fastening, cabling, thermal management, and assembly feasibility. I’ve worked on complex mechanical and electromechanical products where DFM, service access, motion constraints, and practical fabrication requirements must be resolved before production. I’ll review each assembly against its functional requirements, identify actual design risks, and provide marked-up models with specific corrective recommendations rather than generic checklist comments. I’ll also document key assumptions and findings in a concise engineering report, followed by a short handoff call so your team can implement the changes efficiently. Regards
$100 USD in 2 days
6.2
6.2

As an experienced and dedicated mechanical engineer with over a decade in the field and proficiency in SolidWorks (CSWP certified), I am confident in my ability to excel at your ongoing electro-mechanical review task. I have successfully applied my robust background in various sectors such as HVAC, Automotive, Oil & Gas, and more. This diverse experience has molded me into a well-rounded engineer, enabling me to bring unique perspectives to problem-solving—a crucial skill in your project. Not only do I specialize in solid 3D CAD design, but I also boast expertise in tolerance analysis, interference detection, and motion studies—all key areas of focus for your project. Additionally, I have a track record for providing actionable engineering reports that aren't just generic checklists but rather concise summaries of findings tailored to your specific needs. My resourcefulness extends beyond the digital realm; I'm well-acquainted with DFM and consider real-world assembly insight an essential part of the design process—a quality that sets me apart. What makes me even more ideal for this collaboration is my agency-free status as an independent freelancer. My clients from the USA, Germany, and the UK can vouch for my ability to deliver results precisely tailored to their requirements within their timelines. Overall, my comprehensive skill set combined with my commitment to professionalism and dedication make me undoubtedly an excellent fit for your ongoing project demands.
$250 USD in 10 days
6.3
6.3

With my extensive experience in electro-mechanical engineering and proficiency in SolidWorks, I am well-equipped to deliver exceptional results for your project. My understanding of interference detection, tolerance analysis, and motion study tools ensures that I can accurately inspect your 3D mechanical layouts, highlighting any problem areas and recommending specific fixes - delivering marked-up assemblies that guarantee better production outcomes. My depth of knowledge extends to real-world assembly insights and Design for Manufacturing (DFM). This will prove invaluable when evaluating the feasibility of fastener accessibility and assembly, cabling paths and wire routing, as well as heat-sink placement and thermal management. Not only do I work to optimize your designs but I pride myself on concise yet comprehensive reports that highlight the key findings of my analysis, giving your team actionable insights they can quickly implement. Moreover, apart from being a master at SolidWorks and all its related tools and utilities, I also bring considerable experience in other areas like 3D rendering, animation services, web design and development which can be utilized to expand our future projects if needed. By choosing me for this task, you get the perfect blend of theoretical expertise and practical skills that will push the boundaries of what we can achieve together. Let’s create efficient mechanical layouts for your projects to maximize yields and minimize errors.
$59 USD in 1 day
6.4
6.4

Hi, We are an individual freelancer with 11+ years of hands-on experience in SolidWorks, 3D mechanical modeling, product development, and manufacturing-focused CAD, making us well suited for ongoing prefabrication reviews of mechanical assemblies. How can we ensure each assembly is fully manufacturable while identifying clearance, interference, tolerance, fastening, cabling, and thermal-management issues? We will carefully review native SolidWorks assemblies and STEP exports, using interference detection and practical DFM principles to identify real engineering concerns rather than generic checklist items. For every task, we can provide clearly marked problem areas with specific recommended fixes, supported by a concise report documenting findings and assumptions. Our structured review process will help your team implement changes efficiently while maintaining assembly feasibility and production intent across ongoing, as-needed tasks. Best Wishes
$100 USD in 3 days
5.8
5.8

Hello, I am an independent electro-mechanical engineer with extensive SolidWorks expertise, specializing in pre-fabrication design reviews, DFM, tolerance analysis, and assembly validation. A key issue will be identifying clearance, tolerance, fastening, cable-routing, and thermal-management problems before fabrication, when design changes are significantly easier and less costly to implement. I have extensive hands-on experience reviewing complex mechanical and electro-mechanical assemblies using SolidWorks interference detection, tolerance stack-up analysis, motion studies, and practical manufacturing and assembly principles. For each task, I will provide a thoroughly reviewed and marked-up assembly with specific red-lines and recommended corrections, a concise actionable engineering report documenting findings and assumptions, and a handoff walkthrough to ensure your team can implement the changes efficiently. For the first review, can you share a representative SolidWorks assembly and indicate your typical manufacturing processes and tolerance standards so I can assess the expected review depth and turnaround? Thank you,
$140 USD in 3 days
5.7
5.7

Hello, I’m an individual SolidWorks mechanical designer with 10+ years of experience in 3D CAD, mechanical design, assemblies, and manufacturing-focused engineering. I can review your SolidWorks assemblies for interference and clearance issues, tolerance stack-ups, fastener accessibility, assembly feasibility, cable routing, thermal/heat-sink placement, and DFM concerns. For each task, I’ll provide clear marked-up/red-line feedback, specific recommended fixes, and a concise engineering report. I can also join a short handoff call to explain the findings and help your team implement the changes. I’m available for ongoing on-demand work and can start with your first assembly review. Best regards, StarSpark3D
$37 USD in 1 day
5.6
5.6

I’m an independent mechanical design engineer working primarily with SolidWorks and Fusion 360, with experience in mechanical assemblies, product development, electronics packaging, and DFM. A relevant example is my ongoing product development work for a Norwegian client, where I review and refine mechanisms around clearances, tolerances, component interfaces, assembly access, and manufacturability before factory review. I’ve also designed an electronics dashboard enclosure with internal component mounting, shown in my portfolio. For each task, I can review the supplied SolidWorks assembly systematically for interference, tolerance stack-up, fastener/tool access, cable routing, assembly sequence, and heatsink/component placement. I’ll return clearly marked problem areas with specific recommended changes and a concise engineering report rather than a generic checklist. I’m also comfortable walking through the findings with your team on a call and can start immediately.
$110 USD in 3 days
5.6
5.6

The key value in these reviews is catching assembly and manufacturing problems before fabrication—not simply running SolidWorks interference checks. I can review your assemblies for clearance, tolerance relationships, fastener access, cable routing, thermal constraints, and practical assembly issues, then mark the specific problem areas with recommended fixes. My workflow would be: review the design brief and native assembly, identify critical issues, verify the engineering assumptions behind each finding, and deliver marked-up CAD/red-lines plus a concise actionable report. I can also walk your team through the findings in a short handoff call. The scope can be handled task-by-task, with up to 2 revision rounds where applicable; substantial additional engineering work can be scoped separately. Final timing depends on the supplied assembly and task complexity. Do you expect each review to cover a complete product assembly, or individual subsystems/components?
$95 USD in 2 days
5.4
5.4

Hi, good day! I would like to apply for this project. I am an independent mechanical engineer with strong SolidWorks and product design experience. I can review your 3D assemblies for interference, clearances, tolerance stack-ups, fastener accessibility, cable routing, thermal management, and overall DFM/assembly feasibility. I can provide clear redlines in SolidWorks, an actionable engineering report, and a brief handoff call for each task. I’m interested in supporting your team on an ongoing, as-needed basis. Thank you.
$30 USD in 2 days
4.7
4.7

Hi, I'm Stefan. This caught my attention mainly because I thrive on tackling complex engineering challenges like the ones you've outlined. I've worked extensively with SolidWorks on various mechanical designs, focusing on interference detection and tolerance analysis to ensure seamless assembly. Here's how I'd approach it: ▸ Conduct a thorough review of the assembly to identify critical interference and clearance issues right away. ▸ Provide a marked-up SolidWorks file highlighting specific problem areas and recommended adjustments tailored to your design brief. ▸ Ensure a concise, actionable report that addresses your team's needs and clarifies any engineering assumptions. I genuinely enjoy diving deep into projects, understanding the nuances, and treating each outcome like it’s my own work. A good idea doesn't get far sitting in a project description, so reach out and let's talk it through. Regards, Stefan.
$150 USD in 14 days
4.8
4.8

With over [X amount] of extensive experience in mechanical design, product development and SolidWorks, I'm ready to provide you with the robust support you require for your ongoing, 3D mechanical layouts. Incredible design must not only be visually appealing but also ensure practicality and manufacturability. My proven skills in interference detection, tolerance analysis, motion study tools, and SolidWorks will allow me to deliver native assemblies & STEP exports marked-up with actionable recommendations to address problem areas while considering real-world assembly situations. Additionally, my expertise in Design for Manufacturing (DFM) aligns seamlessly with this project need. Having built my career on transforming ideas into manufacturing-ready designs with engineering precision, I understand the importance of efficient fastener accessibility, cabling paths and thermal management. Furthermore, I bring ANSYS simulation knowledge to the table that could be beneficial for validating your designs for structural integrity orthermal performance.
$250 USD in 7 days
4.4
4.4

Hi there ! As a seasoned electro-mechanical engineer, I bring a wealth of experience and a proven track record of excellence to the table. My skills in SolidWorks and other design software are highly advanced, and I have specifically honed them in the areas that your project requires. I am an expert in identifying and rectifying potential clearance and interference issues, good at performing tolerance stack-up analysis, adept at ensuring easy fastener accessibility and assembly feasibility, well-versed with efficient cabling paths and wire routing techniques as well as thermal management optimization. One of my key strengths is my commitment to DFM or Design for Manufacturing principles which align perfectly with your project requirement of 'real-world assembly insight.' Plus, my knowledge and hands-on experience with diverse manufacturing techniques like Sheet Metal, CNC Machining, 3D Printing, Injection Molding, Weldments helps me design products as per manufacturing constraints from the start leading to more efficient designs. With me on your team, you will rest easy knowing that your mechanical layouts will be thoroughly examined and any flaws eradicated leaving you with comprehensive reports. Thanks & regards Gaurav Sharma….
$30 USD in 1 day
4.2
4.2

Hi, I’m an independent SolidWorks and 3D CAD professional, and I can support your team with detailed pre-fabrication reviews of mechanical assemblies on an ongoing, as-needed basis. I can review your native SolidWorks assemblies and STEP files for clearance and interference issues, tolerance concerns, fastener accessibility, assembly feasibility, cable and wire routing, and overall manufacturability. Rather than providing a generic checklist, I’ll identify specific problem areas and provide practical recommendations that your team can directly implement. For each task, I can provide a clearly marked-up assembly with red-lines, a concise engineering report explaining the findings and assumptions, and a quick handoff call to walk your team through the recommended changes. I’m comfortable working with SolidWorks assemblies and understand the importance of designing parts not only to fit correctly in CAD, but also to be practical to manufacture and assemble. I’m an individual freelancer, not an agency, and I’m available for ongoing work as needed. I’d be happy to review your first assembly and demonstrate the level of detail you can expect. Best regards, Mubashir
$60 USD in 1 day
4.2
4.2

Hello, I am an independent individual freelancer, not an agency, and I can support your ongoing SolidWorks pre-fabrication reviews. I can review native SolidWorks assemblies and STEP exports against the provided design brief and constraints. My review will focus on real engineering issues rather than generic checklist comments. I will check clearances, interference points, tolerance stack-ups, and assembly accessibility. I can also review fastener access, component movement, cabling routes, and wire-management concerns. For electro-mechanical layouts, I will assess heat-sink placement and practical thermal-management considerations. I will mark problem areas directly in the assembly and provide specific, actionable recommendations. I can prepare a concise report explaining findings, assumptions, and the recommended design changes. I understand the importance of DFM and practical assembly considerations before fabrication begins. I can also provide a quick handoff walkthrough so your team can clearly understand and implement the changes. I am comfortable with recurring, on-demand review tasks and can adapt to your existing workflow. Gulnaz
$45 USD in 1 day
4.5
4.5

Hi, how are you doing? I went through your project description and I can help you in your project. your project requirements perfectly match my expertise. We are a team of Expert Mechanical design Engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas: Product Design | 3D CAD Modelling Finite Element Analysis | Computational Fluid Dynamics Thermal analysis | Structural analysis HVAC and Heat load calculation Structural Analysis We are proficient in using following software’s: AUTOCAD SOLIDWORKS ABAQUS ANSYS APDL | ANSYS Fluent MATLAB | SIMULINK COMSOL Multiphysics FUSION360 | CATIA We have good command over REPORT WRITING, we can show you many samples of our previous reports. We can discuss further details in the message box.
$140 USD in 7 days
4.7
4.7

Great Neck, United States
Payment method verified
Member since Mar 11, 2009
$250-750 USD
$750-1500 USD
$30-250 USD
$30-250 USD
$10-30 USD
₹100-400 INR / hour
$15-25 USD / hour
$250-750 USD
₹12500-37500 INR
$30-250 USD
min ₹5000000 INR
£100-200 GBP
$250-750 USD
$250-750 USD
$250-750 USD
$30-250 USD
$30-250 USD
$30-250 USD
$250-750 USD
$750-1500 USD
$10-30 USD
$14-75 NZD
$250-750 USD
£10-15 GBP / hour
₹600-1000 INR