I am looking for someone to 3D model a container pop-up bar based on my brief and then create basic renders of the model for presentation.
The 3D Model:
The pop-up bar will be built into a 20 ft long, high-cube shipping container.
Dimensions of the container are:
External: L: 6058mm ; W: 2438mm; H: 2896mm
Internal: L: 5900mm; W: 2352mm; H: 2695mm
(Basic blueprints provided for reference)
- The container exterior is white
- The front-facing, long side of the container will fold down to be used as a deck with timber decking, like in the picture attached of the existing Bar.
- Internal linings for the container walls are white, vertical grooved plywood with grooves every 100mm. (Example attached)
-The left short side of the container (looking from the front) will have an entrance door for staff. (Basic sketch plan provided in attachments)
-The bar will sit within the container ie. nothing protruding past the door opening.
-The bar will be 900mm high and have a stainless steel bench top. Bar fridges will go below.
-The front bar will have a 300x 35 Oak timber servery at 1100mm high. This wraps 90 degrees back to the wall to close off the bar area. The bar front is also lined in groove ply painted white.
-1100mm wall between the right side of bar and stairs. Timber severy will run along the top of this into the rear wall.
-The floor will be vinyl with a timber look.
-The front bar, and back wall of the bar, and rear of the container will have a placeholder logo as attached to the brief.
-A 250mm deep shelf running along the back wall of the bar
-A pull out pergola will be fitted to the container, like in the existing bar picture.
Once the model is approved, create 5 perspective shots of the container bar (including basic materials) from different angles, whichever you believe portrays the project best.
The pop-up bar should be rendered with an empty white background and should have 3D people in the shots to make the scene more lively.
Once you are given the project, the model should be completed within 7 days. Quick, daily communication is required.
The final renders should be presented at a resolution of 1080p minimum.
The 3D model and rendering file should be included in the package in case I need to modify the model further in the future.
The project should take 10-20 hours to complete. If you work quickly and efficiently I'd be looking to hire you again. I aim to find someone to work with for similar projects in the future.
Experience in Sketch-Up and Lumion is preferred.
24 pekerja bebas membida secara purata $8/jam untuk pekerjaan ini
Hi! Good day! I can design your container bar in 2d floorplans and 3d renders with all your requirments, in the given time! I hope we can work together! Thank you!