
Closed
Posted
Paid on delivery
I have five finalized mold designs ready to go. STEP and STL files are available. I need a hands-on fabrication specialist who can print the five molds on an SLA/resin printer and then cast a short run of flexible urethane prototype parts. Job overview Print all five completed mold designs via SLA/resin 3D printing in a suitable material for urethane casting. Cast 33 finished flexible urethane prototype blocks across five sizes. Finished part dimensions range from a 2.5" × 3" cylinder to a 15" × 6" × 4" rectangular block. Approximately Shore A 60 flexible urethane. Consistent flexibility across the 33 prototype pieces is important. Finished blocks should be cleanly cast with a smooth, matte/low-gloss appearance. Five specified colors will be provided. Ship all five completed molds and all 33 finished prototype blocks to Colorado, USA. Deliverables Five SLA-printed prototype molds. Thirty-three finished urethane prototype blocks, properly cured and cleaned. Shipment of all five molds and 33 finished blocks to Colorado, USA. This is fabrication only. The CAD/mold design work has already been completed. I am specifically looking for someone who can handle both the physical SLA/resin mold printing and urethane casting for this small prototype run. Target budget: $600 total. STEP/STL files will be provided to a suitable candidate after confirming the project is a good fit.
Project ID: 40795064
37 proposals
Remote project
Active 19 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
37 freelancers are bidding on average $431 USD for this job

My 9 years of professional mechanical design experience, combined with my 3D printing expertise, makes me well suited to fabricate your five finalized molds from the supplied STEP and STL files. Since the CAD and mold designs are already complete, I can focus on accurate SLA/resin production for the molds and the practical requirements of your prototype run. I understand this project requires both physical mold printing and urethane casting: 33 flexible prototype blocks across five sizes, approximately Shore A 60, with consistent flexibility, clean surfaces, specified colors, and proper curing and finishing. My mechanical background helps me work carefully with dimensional accuracy and fit while producing dependable printed tooling for the casting process. I can also handle preparation of the completed molds and prototype parts for shipment to Colorado. I would be glad to take responsibility for this fabrication project and deliver the complete set of five molds and 33 finished prototype blocks.
$250 USD in 2 days
6.0
6.0

Your five finalized STEP/STL mold designs are well matched to my experience preparing functional prototypes and print-ready models for resin and FDM 3D printing. I focus on accurate geometry, suitable wall thicknesses, clearances, support placement, and print orientation—important details for producing usable SLA molds for urethane casting. My background in SolidWorks, manufacturing-oriented CAD, and 3D printing preparation supports careful handling of mechanical parts, enclosures, and prototypes. I can work from your completed files without changing the design intent and am focused on delivering clean, accurately printed molds and properly finished prototype parts. The required 3D Printing skill is central to my work, and I understand the importance of consistent dimensions and finish across a small production run. I would be glad to handle the fabrication of the five molds and 33 urethane prototype blocks, including preparation for shipment to Colorado. Choose me to produce this prototype run with accuracy and practical attention to print quality.
$253 USD in 2 days
5.9
5.9

My experience with 3D printing and manufacturing makes me well suited to produce your five SLA/resin molds and cast the required urethane prototype blocks. I work with 3D modeling and fabrication-related tools including CATIA, Rhino, SolidWorks, Blender, ZBrush and other 3D printing workflows, giving me a strong technical foundation for working from finalized STEP and STL files. I understand that this project is fabrication only and that consistency, clean surfaces, correct flexibility, specified colors and careful finishing are essential across all 33 parts. My engineering and 3D design background helps me work accurately with different mold geometries and dimensions, while my hands-on 3D printing skill supports producing suitable prototype molds for the casting process. I am ready to handle this small-batch fabrication project professionally and ship the completed molds and prototype blocks to Colorado. Choose me for accurate, careful production from your finalized files.
$250 USD in 3 days
4.8
4.8

Your five finalized STEP/STL mold designs are ready for production, and my 3D printing expertise is focused on turning digital models into accurate, clean, print-ready results. I specialize in checking geometry and slicer compatibility before printing, which supports reliable SLA/resin fabrication of the molds. My experience with 3D print-ready modeling and 3D Printing allows me to work carefully with detailed files and maintain dimensional accuracy across the five mold sizes. I understand that this project also requires urethane casting for 33 flexible prototype blocks, consistent Shore A 60 flexibility, clean surfaces, specified colors, and shipment of the completed molds and parts to Colorado. I would be glad to handle this fabrication-focused prototype run and deliver the molds and cast pieces with close attention to accuracy and finish. Choose me to turn your finalized designs into physical prototypes.
$275 USD in 2 days
5.2
5.2

Your five finalized STEP/STL mold designs can be taken from digital files to physical prototypes by a fabrication specialist experienced in 3D printing and manufacturing. My background includes 3D printing models, solid modeling, CAD, and detailed 3D design using tools such as AutoCAD, CATIA, Rhino, Blender, and ZBrush. Because this project requires both accurate SLA/resin mold production and hands-on casting of flexible urethane parts, my manufacturing-focused skill set is directly relevant. I understand the importance of preserving mold geometry, producing clean surfaces, and maintaining consistency across the 33 prototype blocks in their specified sizes, colors, and flexibility. I would be glad to handle the five printed molds and urethane prototype run, including preparation for shipment to Colorado. Choose me for a careful, fabrication-focused approach to your prototype parts.
$600 USD in 1 day
4.7
4.7

Hi, We at Jetjams Technologies can help with the fabrication of your five SLA-printed molds and 33 flexible urethane prototype blocks. We understand this is a fabrication-only project, with the CAD designs already completed. Our approach: - Review the STEP/STL files for printability. - SLA print all five molds using suitable resin. - Cast 33 urethane blocks targeting Shore A 60 flexibility. - Match the five specified colors and maintain consistent material properties. - Clean, cure, and finish each piece with a smooth, matte appearance. - Package and arrange shipment of all molds and finished parts to Colorado, USA. We'd be happy to review the files and confirm the production process before proceeding. Revisions: Until you're satisfied with the final result Best regards, Ben Jackson Jetjams Technologies
$2,000 USD in 7 days
4.6
4.6

Hey there, I can help assess your five mold files for SLA printing and plan the urethane casting process for all 33 flexible prototype blocks, targeting Shore A 60 hardness, consistent flexibility, and a smooth matte finish. Could you please share the mold dimensions, five color specifications, urethane material requirements, and shipping details, etc.? I’d also like to review the largest mold’s print requirements and confirm the $600 budget covers printing, casting, materials, and shipping to Colorado. So I can help evaluate the fabrication requirements and confirm feasibility, material compatibility, and production constraints before committing to the full run. Thanks!
$590 USD in 4 days
4.4
4.4

My 3D printing specialization makes me well suited to produce your five SLA/resin molds from the finalized STEP and STL files. I work with 3D models in Blender, SolidWorks, ZBrush, Bambu Studio and Cura, and can prepare existing designs for accurate printing by checking geometry, wall thickness and support requirements. Because your CAD work is already complete, I can focus on the fabrication side: preparing the mold files for resin printing and producing the required prototype parts through urethane casting. I understand that the key priorities are consistent flexibility around Shore A 60, clean cured surfaces, the five specified colors, and careful handling of the 33 pieces and molds for shipment to Colorado. I would be glad to take responsibility for this small prototype fabrication run and deliver the completed molds and cast blocks as specified.
$250 USD in 1 day
4.4
4.4

Hello, I understand that the CAD and mold designs are already finalized, and the project requires physical SLA mold printing followed by urethane casting of 33 flexible prototype blocks. My team can coordinate the fabrication workflow, including mold preparation, casting requirements, surface finishing, and quality checks to ensure consistent Shore A 60 flexibility and clean results. Before confirming the project, I would like to review the STEP/STL files, mold dimensions, urethane specifications, and shipping requirements to verify the production process and total cost. I'm interested in discussing the details and confirming whether we can meet your quality and delivery expectations.
$400 USD in 1 day
4.2
4.2

My extensive hands-on experience with photopolymer 3D printing makes me well suited to fabricate your five SLA/resin molds for urethane prototype casting. I work with both photopolymer and filament 3D printing, and understand the importance of producing accurate, clean mold surfaces for consistent finished parts. Beyond 3D printing, my background includes 3D modeling and creating models specifically for printing, supported by practical experience with 3ds Max and ArtCAM. This gives me a strong understanding of printable geometry, surface quality, and the care needed when producing molds in different sizes. I can also support the visual and finishing requirements through my experience with 3D visualization and design tools. I would be glad to handle the physical fabrication of the five molds and the 33 flexible urethane prototype blocks, including cleaning and preparation for shipment to Colorado. Choose me for a careful, hands-on approach to this prototype run.
$250 USD in 7 days
4.1
4.1

Hello, I’m interested in your prototype fabrication project. I have around five years of experience in 3D modeling and 3D-printing workflows, and I understand the importance of accurate dimensions, clean mold geometry, and consistent results across a production batch. Since your STEP and STL files are already finalized, I can review the designs for print preparation, assess the mold geometry, and help coordinate the SLA printing requirements. I understand that the urethane parts must maintain consistent Shore A 60 flexibility, accurate dimensions, clean surfaces, and the specified colors. I would first like to review the files and confirm the fabrication requirements and casting process before committing to the complete production and shipping. I’m happy to discuss the project further. Gulnaz,
$450 USD in 1 day
4.2
4.2

Hi there, I can help fabricate your five SLA resin molds and cast 33 flexible urethane prototype blocks. I understand the requirements for Shore A 60 hardness, five colors, smooth matte finish, consistent flexibility, proper curing, and shipping to Colorado, USA. I have experience in 3D modeling using 3ds Max, Blender, Maya, and Revit. I can create product models, jewelry designs, or any custom 3D work with high-quality results. You can view my previous work here: https://www.freelancer.com/portfolio-items/10401693-3d-costume-hoodie-render https://www.freelancer.com/portfolio-items/10388215-3d-product-models (All Types of 3D Products & Prototypes) Thanks & Regards Humayo.
$250 USD in 3 days
3.6
3.6

My experience in 3D printing, manufacturing, and rapid prototyping directly matches your need for five SLA/resin molds and a short urethane prototype run. I work with production-ready 3D models and understand the importance of accurate dimensions, clean surfaces, and practical functionality in physical prototypes. My background in CAD design, product development, STL repair, model optimization, and print preparation supports careful handling of your finalized STEP and STL files. I can also apply my rapid-prototyping and manufacturing skills to producing consistent flexible parts, with attention to mold quality, casting cleanliness, curing, and the specified colors and finish. I would be glad to fabricate the five molds and 33 prototype blocks and arrange shipment to Colorado. Choose me for a hands-on, detail-focused fabrication partner for this project.
$600 USD in 2 days
3.5
3.5

Hi there, Thanks for posting the project. With 8 years of relevant engineering and product development experience, I understand you need a fabrication partner who can handle the complete physical production process, from SLA mold printing to flexible urethane casting. I can help coordinate the required production workflow for all five molds and 33 prototype blocks, with attention to consistent Shore A 60 flexibility, accurate dimensions, clean surfaces, and the five specified colors. My proposed workflow includes Review the STEP/STL files for printability and casting suitability. SLA/resin print all five molds using an appropriate material. Prepare, mix, and cast the urethane to achieve consistent flexibility and color. Cure, demold, clean, and inspect all 33 finished pieces. Arrange secure packaging and shipment to Colorado, USA. Before confirming, I’d like to clarify the mold sizes, urethane specifications, and shipping requirements. I should also confirm access to the necessary SLA printing and casting facilities before committing to physical fabrication. Please share the file details and shipping ZIP code so I can assess feasibility, turnaround time, Best Regards, Sidra https://www.freelancer.pk/u/sidratulm20
$250 USD in 3 days
3.1
3.1

⚡ PROTOTYPE PARTS THAT MEET YOUR EXACT SPECS MATTER. With extensive experience in SLA printing and urethane casting, we specialize in bringing designs to life with precision. Our team has successfully completed similar projects, ensuring quality and attention to detail. You need reliable prototypes that not only fit your mold designs but also maintain consistent flexibility across all dimensions. We understand that the final look and feel are just as crucial as functionality. We will utilize high-quality resin for printing and ensure a smooth, matte finish on all 33 urethane blocks. We also prioritize consistent curing times to achieve the desired Shore A 60 flexibility. I’ll personally oversee the entire process, coordinating with our specialists to guarantee seamless communication and quality control throughout. REACH OUT, LET'S KEEP THIS SIMPLE. Regards, Stefan Clavorn Collective
$400 USD in 14 days
2.8
2.8

Hi there, We at Pixora Studios are equipped to handle the physical fabrication, SLA resin printing, and precision urethane casting for your 33 prototype blocks. We can print your five STEP/STL mold designs using durable, high-temp SLA resin and cast all 33 blocks in Shore A 60 flexible urethane. We will ensure consistent flexibility, specified custom color matching, and a smooth matte finish across all sizes, before securely shipping the complete set of molds and parts to Colorado. Let's discuss your specs and timeline to kick off production! Best regards, Pixora Studios
$250 USD in 1 day
3.2
3.2

My 8+ years as a Senior Mechanical Designer, combined with hands-on expertise preparing optimized STL/3MF files for FDM and resin 3D printing, directly matches your need for accurate SLA-printed molds. I understand how critical dimensional accuracy, clean surfaces, and reliable fabrication are when those molds will be used for urethane prototypes. My background spans SolidWorks, TopSolid, Autodesk Inventor, Fusion 360, AutoCAD, 3ds Max, and Blender, with a strong focus on manufacturing-ready geometry, mold design, and real-world production. I can work from your finalized STEP and STL files and apply my 3D-printing and fabrication knowledge to produce the five molds and support a consistent, clean finish across the 33 flexible prototype blocks. I am prepared to handle this fabrication-focused project carefully and professionally, including the physical printing, casting, cleanup, and shipment requirements. Choose me to turn your completed designs into accurate prototype parts.
$250 USD in 1 day
2.5
2.5

Thank you for the project posting. I have 12+ years of experience in mechanical CAD and product development, including 3D printing and prototype design workflows. I can review your five finalized STEP/STL mold files and assess their suitability for SLA/resin printing and flexible urethane casting. I’ll focus on achieving consistent Shore A 60 flexibility, clean surface finishes, accurate dimensions, and uniform curing across all 33 prototype pieces. I can also review the specified colors and casting requirements to establish a practical production process before starting. Deliverables: Five SLA/resin-printed prototype molds. 33 flexible urethane prototype blocks in five sizes. Five specified colors with consistent Shore A 60 hardness. Cleaned, cured parts with a smooth matte finish. Quality checks for dimensions and surface finish. Packaging and shipment coordination to Colorado, USA. Could you share the STEP/STL files and confirm whether the molds are designed for direct urethane casting or require additional mold preparation? Which urethane casting system or material brand do you prefer? Is the $600 budget inclusive of international shipping and customs, or is shipping covered separately?
$600 USD in 5 days
1.5
1.5

Hey there, I can help bring your five finalized mold designs into physical production through SLA/resin 3D printing and flexible urethane casting. I’ll focus on producing all 33 prototype blocks with consistent Shore A 60 flexibility, accurate dimensions, clean finishing, and smooth matte surfaces in your five specified colors. I understand this project requires fabrication only, with no CAD redesign. I can review the STEP/STL files, confirm material and printing requirements, and discuss the production and shipping arrangements to Colorado before proceeding. Kindly connect for further communication. Best regards, Tooba D
$250 USD in 3 days
0.6
0.6

Hello, My 3D Printing skill directly matches this fabrication project, and I can support the mold-production requirement from finalized STEP and STL files. I also bring 16+ years of experience in creative technology and 3D visualization, including 3D modeling, rendering, product visualization, Blender, Autodesk Maya, and 3ds Max. Your project requires careful handling of five resin-printed molds, flexible urethane prototype blocks, consistent appearance, specified colors, cleaning, curing, and shipment. My 3D-focused background and access to a dedicated team of 55+ professionals provide a strong foundation for coordinating this specialized prototype work while keeping the finished pieces aligned with the supplied designs. I would be glad to take responsibility for producing the five molds and 33 prototype blocks and delivering the complete set to Colorado. Choose me for a focused, reliable fabrication partnership. Thanks!
$555 USD in 1 day
0.0
0.0

Brighton, United States
Payment method verified
Member since Oct 30, 2026
$30-250 USD
$250-750 USD
$10-30 USD
$30-250 CAD
$20-80 USD
$15-25 USD / hour
$10-30 USD
$25-50 USD / hour
₹12500-37500 INR
₹37500-75000 INR
£250-750 GBP
£20-250 GBP
€30-250 EUR
$30-250 USD
$30-250 USD
$250-750 CAD
$30-250 USD
€150-500 EUR
₹12500-37500 INR
$250-750 USD
₹12500-37500 INR