
Closed
Posted
Paid on delivery
Project Description This project aims to investigate and predict the structural behavior and failure mechanisms of an adhesively bonded carbon-fiber-reinforced polymer (CFRP) assembly with sandwich structure (lower stiffness core) using Finite Element Analysis (FEA). The structure consists of hollow cylindrical CFRP members connected through adhesively bonded joints. Its geometry is defined by the cylinder length, outer diameter, wall thickness, joint configuration, adhesive overlap length, and adhesive layer thickness. An existing full-scale structure serves as the reference, while a scaled-down geometry will be developed for numerical analysis. Required Software: ANSYS Project Scope The project focuses on the following activities: Structural and Geometric Analysis: Understand the original structural configuration, identify the load-bearing components, define the loading and boundary conditions, and develop a scaled-down structural geometry. Material Properties Definition: Define the mechanical properties of the CFRP components and adhesive material, including elastic properties, strength parameters, and relevant failure characteristics. FEA Model Development: Develop a detailed finite element model in ANSYS, including appropriate element types, material orientations, mesh configurations, loading conditions, and boundary conditions. Contact and Cohesive Zone Modeling (CZM): Define the interactions between structural components and implement appropriate adhesive bonding models. A Cohesive Zone Model (CZM) will be considered to simulate adhesive damage initiation, damage evolution, and progressive debonding at the bonded joints. Mesh Convergence and Numerical Sensitivity Analysis: Conduct mesh convergence studies to establish numerical reliability and evaluate the influence of modeling parameters on the predicted structural response. Structural and Failure Analysis: Evaluate stress distribution, deformation, structural stiffness, load-bearing capacity, stress concentrations, and potential failure mechanisms, with particular emphasis on the adhesively bonded regions. Project Objective The ultimate goal is to develop a reliable numerical model capable of predicting the global mechanical response of the CFRP assembly and the local damage and failure behavior of its adhesive joints under defined loading conditions. Openness to Discussion and Alternative Approaches The methodology outlined above represents the initial project direction rather than a fixed approach. I am open to discussing alternative modeling strategies, numerical methods, material models, contact definitions, and failure criteria that may be more suitable for this particular structure. I would also appreciate suggestions regarding potential improvements, overlooked considerations, technical challenges, or more efficient approaches to achieving the project objectives. Although ANSYS is required, I am flexible regarding the specific modeling techniques and workflows implemented within it. The intention is not necessarily to follow the proposed methodology exactly, but to identify the most appropriate, technically sound, and computationally efficient approach through discussion and critical evaluation.
Project ID: 40790823
11 proposals
Remote project
Active 14 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
11 freelancers are bidding on average $73 USD for this job

Hi there, I can perform detailed ANSYS FEA of your CFRP adhesive joint, considering composite material properties, orthotropic behaviour, adhesive modelling, contact interactions, and nonlinear failure mechanisms. I have 7+ years of CAE experience, including structural analysis, nonlinear contact, composite simulations, and engineering validation. Deliverables: - ANSYS model setup and material definition - Adhesive and CFRP interface modelling - Stress, strain, and deformation analysis - Failure assessment and result interpretation - Simulation report with recommendations Do you have the CFRP layup details, adhesive properties, and joint geometry available? Best regards, Arati M.
$30 USD in 7 days
6.8
6.8

I’ll develop the scaled geometry, define the CFRP material orientations and orthotropic properties, and represent the adhesive using appropriate material and failure data. For progressive debonding, I would evaluate cohesive-zone modelling (CZM), selecting the interface formulation based on the joint geometry, available fracture-energy data, and ANSYS capabilities. Mesh convergence and sensitivity studies will help establish the reliability of the predicted stiffness, load distribution, and failure response. One important consideration is scaling: reducing the geometry does not automatically preserve structural stiffness or failure behaviour. The scaling approach should account for geometry, material properties, loading, and the intended failure mechanisms. I would also compare the computational cost and accuracy of detailed modelling against a more efficient global-to-local approach. Deliverables would include the ANSYS project files, stress and deformation results, adhesive damage and debonding predictions, mesh convergence results, and a technical report documenting assumptions, limitations, and recommendations. Could you share the original and scaled geometries, loading conditions, CFRP layup, and available adhesive strength and fracture-energy data? These will determine the most suitable modelling strategy and project timeline.
$30 USD in 7 days
6.3
6.3

Hello, I am mechanical design engineer and expert in Solidworks and Ansys. I can do FEA of the project with 100% accuracy. Contact me to make deal. Thanks
$40 USD in 2 days
5.0
5.0

Hi there, I'm a senior mechanical engineer with extensive experience in machine and product design. You can see my portfolio. I'm ready to help you make: ✨ Scaled-down 3D CAD geometry of the CFRP and adhesive joint assembly ✨ Detailed ANSYS finite element model featuring anisotropic material definitions for CFRP ✨ Cohesive Zone Model implementation to simulate progressive adhesive damage and debonding ✨ Comprehensive FEA report detailing stress distribution, failure mechanisms, and mesh convergence studies I'm excited to work with you on your project and deliver the best results possible. I'm waiting for your message.
$20 USD in 1 day
4.4
4.4

I am a Mechanical/Mechatronics Engineering researcher with extensive experience in ANSYS-based Finite Element Analysis (FEA) and structural simulations. I can develop a detailed numerical model of the CFRP sandwich assembly, including material properties, composite orientations, and adhesively bonded joints. The analysis will cover geometry development, meshing, boundary conditions, contact interactions, and Cohesive Zone Modeling (CZM) for progressive adhesive damage and debonding. I will perform mesh convergence and sensitivity studies to ensure numerical accuracy and reliability. Structural performance will be evaluated through stress distribution, deformation, stiffness, load-bearing capacity, and potential failure mechanisms. I will also recommend suitable modeling strategies and failure criteria to achieve computationally efficient and technically reliable results. The final deliverables will include the ANSYS simulation model, key results, and a comprehensive technical report.
$30 USD in 7 days
4.2
4.2

Hello, I can help develop a technically sound ANSYS FEA workflow for your adhesively bonded CFRP sandwich assembly, focusing on structural response and progressive joint failure. I would begin by reviewing the geometry, material data, loading conditions, and scaling assumptions, then establish suitable composite material orientations, contact definitions, and boundary conditions. The modeling strategy would evaluate cohesive zone modeling for adhesive damage initiation, evolution, and debonding, alongside stress concentrations and load-bearing capacity. I would also consider mesh convergence, numerical sensitivity, and computational efficiency to improve result reliability. My mechanical engineering background and familiarity with SolidWorks and AutoCAD support geometry preparation and engineering analysis. Let's discuss your available files, material properties, and expected deliverables to define the scope.
$40 USD in 7 days
4.0
4.0

ANSYS-based structural simulation and Finite Element Analysis are central to my engineering practice, making this CFRP adhesive-joint investigation closely aligned with my expertise. I can support the development of a detailed model for the hollow cylindrical sandwich structure, including geometry interpretation, material definition, composite behavior, adhesive interactions, loading, and boundary conditions. My experience spans mechanical design, product development, CAD modeling, and ANSYS simulation, allowing me to connect the numerical model with the actual structural configuration rather than treating the analysis in isolation. I can also evaluate stiffness, deformation, stress concentrations, load-bearing response, and failure behavior around the bonded regions, while considering suitable contact and cohesive-zone approaches within ANSYS. I would be glad to contribute a technically sound and computationally efficient FEA solution for your scaled CFRP assembly and discuss the most appropriate modeling strategy for reliable adhesive-joint failure prediction.
$50 USD in 2 days
3.4
3.4

Hello, I’m a Mechanical Engineer with a background in mechanical design, engineering analysis, and fluid-flow simulation using ANSYS. Your project’s focus on CFRP structures and adhesively bonded joints is particularly interesting because it combines structural mechanics, material behavior, and failure analysis. I can assist with developing the structural geometry, defining material properties and boundary conditions, setting up the ANSYS model, and evaluating stress distributions, deformation, and load-bearing behavior. I would also carefully consider mesh convergence and the appropriate contact or cohesive-zone approach for representing adhesive damage and progressive debonding. To establish a reliable methodology, I would first review the original geometry, available material data, loading conditions, and scaling requirements before finalizing the modeling strategy. Please share the reference geometry, loading details, and available CFRP and adhesive material properties so we can determine the most suitable FEA approach. Best regards, Mechanical Engineer
$68 USD in 4 days
1.9
1.9

Bogor, Indonesia
Member since Mar 30, 2020
$30-250 NZD
₹1500-12500 INR
₹12500-37500 INR
₹600-1500 INR
$30-250 USD
$100-10000 USD
$30-250 USD
€250-750 EUR
$10-50 USD
₹12500-37500 INR
£10-20 GBP
$15-25 USD / hour
₹12500-37500 INR
$250-750 USD
₹150000-250000 INR
₹1500-12500 INR
$10-30 USD
$30-250 USD
₹600-1500 INR
$30-100 AUD / hour