
Closed
Posted
Paid on delivery
I need to repurpose three Feather 328P boards to detect a new type of signal to trigger an audio output. Requirements: - The boards should detect a wired control signal from electronic equipment. - The new signal will come from a button, switch, or control system. Ideal Skills and Experience: - Proficiency with Feather 328P boards and signal detection. - Experience with wired control signals and integrating them with audio systems. - Background in electronics and audio equipment setup.
Project ID: 40798084
57 proposals
Remote project
Active 1 day ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
57 freelancers are bidding on average $439 AUD for this job

Greetings, I worked on a wearable sensor board where GPIO interrupts and C firmware were used to detect and process hardware signals reliably. I also have experience integrating audio engines and debugging embedded hardware. The main challenge here is identifying the incoming signal voltage and timing, then making sure the Feather 328P detects it without false triggers. Assuming the existing audio hardware is working, I estimate 3–5 days and around $250–$400 for all three boards, with a first demo in 1–2 days. Could you share the signal voltage/type and how the boards currently trigger audio? Sincerely, Oleksandr Gergel
$1,000 AUD in 7 days
8.5
8.5

My Master’s in Embedded Systems and hands-on Arduino, electronics, and signal-processing expertise directly match your Feather 328P audio trigger system. I can develop the firmware and circuitry needed for three boards to reliably detect wired inputs from a button, switch, or external control system and initiate the required audio output. My background spans embedded C/C++, microcontroller firmware, circuit design, electrical engineering, and audio engineering, allowing me to address both signal conditioning and dependable trigger behavior. I can also draw on my experience with complete embedded product development to ensure the boards integrate cleanly with the existing audio equipment. I am ready to repurpose the three Feather boards into a robust, responsive trigger solution and would be glad to discuss the project further.
$750 AUD in 7 days
8.5
8.5

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience connecting microcontrollers to switches and equipment control signals, including audio triggering and adapting existing hardware for new uses. I can help repurpose all three Feather 328P boards, covering the input circuitry and firmware changes needed for reliable audio triggering. I would review your current wiring and code, confirm the new signal's electrical characteristics, and make the necessary changes. I can provide updated firmware, a clear wiring diagram, and support while you test the boards with your equipment. Is the new trigger a dry contact, such as a button or relay, or a powered signal? Does each board already have a working audio output that you want to retain? Please contact me to discuss details.
$700 AUD in 7 days
7.7
7.7

Hi, I understand you want to reuse three Feather 328P boards so they can detect a wired signal from a button, switch, or control system and then trigger an audio output. I can inspect the current board setup, confirm the signal type and voltage, write or update the C Programming firmware, and test reliable trigger behavior across all three boards. My Electronics and Electrical Engineering background will help with safe input protection, grounding, debounce handling, and clean integration with the audio equipment. I will first verify the signal, then build the detection logic, test repeated triggers, and provide clear wiring and setup notes. What voltage, wiring method, and trigger behavior does the control equipment provide when the button or switch is activated? Please start the chat and let’s discuss the existing boards and signal details.
$480 AUD in 7 days
7.2
7.2

My embedded-systems and electronics background makes me well suited to repurpose your three Feather 328P boards for reliable wired signal detection and audio triggering. I work with Arduino, Atmel platforms, C programming, circuit design and embedded control, giving me the right foundation for interfacing buttons, switches or control equipment with these boards. My experience in analog design includes filters and op-amp circuits, while my electronic-design background includes RF transmitters and receivers, Bluetooth readers and transmitters, and magnetic readers. I also design schematics and PCBs with Altium and EasyEDA, and can apply that knowledge to create a clean interface between the incoming control signal and your audio system. My broader experience with embedded platforms including PIC, dsPIC, STM32, ESP32 and DSP systems further supports robust hardware integration. I would be glad to apply my electronics and embedded-system experience to your Feather-based audio trigger system and deliver a practical, dependable solution.
$250 AUD in 7 days
7.5
7.5

Hi, I can modify your three Feather 328P boards to detect the new wired control signals and reliably trigger your existing audio output system. I have extensive experience in electronics, microcontrollers, embedded C/C++, Arduino, and hardware interfacing. I will first examine the existing hardware and identify the input signal characteristics, voltage levels, and triggering requirements. I can implement reliable signal detection, appropriate input protection, debouncing, and firmware modifications for all three boards. I will also ensure proper integration with your existing audio equipment and avoid false triggering. I can provide updated firmware, source code, wiring diagrams, and complete testing support. Could you share the control signal voltage/type and the audio equipment model? I am confident I can deliver a simple, reliable, and cost-effective solution. Inshallah! Regards, Engr Muhammad Usman
$500 AUD in 7 days
7.3
7.3

⭐⭐⭐⭐⭐ I can help repurpose your three Feather 328P boards to detect the new wired control signal and trigger the required audio output. I'd first check the electrical characteristics of the incoming signal, including voltage, polarity, and trigger behavior, then configure the boards for reliable detection and integrate the audio-triggering functionality. My approach: Review the existing hardware and control signal. Develop and configure the signal-detection firmware. Integrate the audio output trigger. Test all three boards and resolve any issues. One important question: Do you know the voltage and signal type coming from the button, switch, or control system? Also, are you using an existing audio module or amplifier? I’ll make sure the solution works reliably with your existing hardware while avoiding unnecessary changes to the setup. Happy to review your current configuration and get started!
$250 AUD in 1 day
5.8
5.8

Hi , I can repurpose your Feather 328P boards right away. As an embedded systems engineer with extensive ATmega328P experience, I handle exactly this type of hardware integration. I will write clean, non-blocking firmware to reliably detect the wired input (managing switch debounce and signal logic) and trigger your audio output seamlessly. I can also advise on any input protection circuitry needed to safely bridge your external control system to the board's GPIO pins. If possible, I can test at my-side either through simulation or with real parts. Let me know the control signal voltage levels and your audio module model, and we can get started. Best, Osama Elkomy
$300 AUD in 4 days
5.8
5.8

Hello, I am an Electrical/Electronics Engineer with 15+ years of experience in embedded systems, AVR/Arduino, STM32 firmware, and audio electronics. I can modify all three Feather 328P boards to detect wired control signals from buttons, switches, or external control systems and trigger the required audio output. I will review the existing hardware, implement reliable signal detection with proper input protection and debouncing, and integrate the audio triggering logic. I can also test and troubleshoot the complete system to ensure reliable operation. Could you share the control signal voltage levels and the audio output setup? Best regards, Hamza
$250 AUD in 3 days
5.4
5.4

Hi, I'm a senior electronics engineer with 7+ years of experience in PCB design, embedded firmware, and signal interfacing. I've developed STM32/ESP32 control systems with 4–16 channels, including digital input detection, interrupt handling, and peripheral control. Approach: ✅ I'll inspect the three Feather 328P boards, existing firmware, and audio output circuitry to identify reusable interfaces. ✅ I'll design input conditioning using pull-up/pull-down resistors, RC filtering, Schmitt triggers, or optocoupler isolation based on signal characteristics. ✅ I'll modify the ATmega328P firmware for reliable edge detection, switch debouncing, and audio trigger timing. ✅ I'll validate all three boards using oscilloscope measurements and repeated trigger tests. Questions: ✅ What are the control signal voltage, polarity, pulse duration, and source impedance? ✅ Does the audio output use an external playback module, amplifier, or existing onboard circuitry? ✅ Should each board respond independently to its own input, or must all three operate synchronously? Best, Yaroslav
$500 AUD in 7 days
5.6
5.6

Okay, I got what you want exactly. I am a Full Stack Engineer Embedded Engineer and Firmware Engineer with 10 years of experience, providing Arduino, ATmega328P, digital signal detection, GPIO interfacing, and audio system integration. In my opinion, the best solution is to repurpose the three Feather 328P boards to reliably detect the new wired control signals and trigger the required audio output. I will implement a suitable input detection circuit and signal-processing logic to ensure stable operation with different types of buttons, switches, or external control systems. This project is very similar to my previous works. I have experience developing ATmega328P-based embedded systems that detect external control signals and trigger specific hardware responses. I have also worked on integrating microcontroller-based control circuits with audio equipment, including input conditioning and reliable output triggering. ✅ So, I will divide your project into three major steps. 1️⃣ Inspect the existing Feather 328P boards and identify the new wired control signal requirements. 2️⃣ Modify the hardware and firmware to detect the incoming signals and trigger the audio output correctly. 3️⃣ Test all three boards, verify reliable signal detection, and validate the complete audio triggering process. Via private chatting or meeting, I will provide the creative idea and good tech solution for your project. Best regards. Maksym
$500 AUD in 7 days
5.5
5.5

I have done many projects using Arduino which is based on atmega328. Feather also has the same chip. We will use Arduino IDE to program the same. I have the necessary skills and time to do the coding to detect the inputs. I have good understanding of Electronics and can design circuits as and when needed. Please arrange for discussion.
$250 AUD in 7 days
5.4
5.4

My embedded systems and electronics engineering background directly matches your need to repurpose three Feather 328P boards for reliable wired signal detection and audio triggering. I work with Arduino-compatible embedded platforms, Embedded C/C++, sensor integration, real-time control, and hardware bring-up, allowing me to adapt the boards to signals from buttons, switches, or electronic control systems. My experience also includes schematic design, mixed-signal hardware, signal integration, PCB debugging, and validation. This is valuable for handling input conditioning, electrical compatibility, noise protection, and dependable interaction with the existing audio equipment without treating the control signal as a simple software-only problem. I can provide a robust embedded and electronics solution for the three boards, including firmware adaptation and practical hardware integration. Choose me to develop and validate your Feather-based audio trigger system.
$750 AUD in 7 days
4.8
4.8

⭐⭐⭐⭐⭐ Repurpose Feather 328P Boards to Detect Signal and Trigger Audio ❇️ Hi My Friend, I hope you are doing well. I checked all of your project requirements and I can see you are looking for signal detection on Feather 328P boards. You have no need to look any further as Zohaib is here to help you! My team is already doing 50+ similar projects for embedded electronics. I will build a compact firmware that reads the wired control signal and fires an audio output instantly. I will also give you a simple wiring guide and test script at no extra cost. ➡️ Why Me? I can easily do your board repurpose as I have 5 years of experience in Arduino, Feather 328P, signal processing, audio interfacing. Not only this, I have a strong grip on PCB design, voltage level shifting and low‑power circuits. ➡️ Let's have a quick chat to discuss your project in detail and let me show you samples of my previous work. Looking forward to discussing with you in chat. ➡️ Skills & Experience: ✅ Arduino IDE ✅ Feather 328P ✅ Signal Detection ✅ Audio Triggering ✅ PCB Layout ✅ Wiring Schematics ✅ Firmware Development ✅ Voltage Level Shifting ✅ Low‑Power Design ✅ Debugging ✅ Embedded C ✅ Hardware Integration Waiting for your response! Best Regards, Zohaib
$350 AUD in 2 days
4.9
4.9

✅✅✅✅✅ I can help repurpose all three Feather 328P boards to detect the new wired control signal and reliably trigger the audio output. My approach will be to first inspect the existing hardware and identify the incoming signal's voltage, polarity, and triggering behavior. I'll then implement a suitable input interface with proper protection, adapt the Arduino firmware for reliable signal detection, and integrate the audio trigger. I'll focus on preventing false triggers, handling signal noise, and ensuring consistent operation across all three boards. Proposed milestones: Inspect existing boards and signal requirements. Implement and test the control signal input. Modify firmware and integrate audio triggering. Test and validate all three units. Do you have the electrical specifications of the new control signal, and are the existing audio output circuits already working? I'm happy to review your current setup and get started.
$500 AUD in 7 days
4.4
4.4

Dear Client, I can help modify your three existing Feather 328P systems so they reliably detect the new wired control signal and trigger the required audio output. PCB Must Innovations has 30+ years of experience in electronics/PCB development across microcontrollers, signal conditioning, wired control interfaces, audio electronics, sensors, protection circuits, and prototype troubleshooting. I would first identify the voltage, timing, polarity, and electrical characteristics of the incoming signal before connecting it to the Feather. Depending on the source, I can develop the appropriate input conditioning using isolation, level shifting, filtering, pull-ups, or protection so the boards respond reliably without risking damage. I can support the complete signal-detection and audio-trigger architecture, interface circuitry, wiring/schematic updates, controller logic integration, testing procedure, and documentation for all three boards. The important part is understanding whether the incoming trigger is a dry contact, logic-level signal, open-collector output, or higher-voltage control signal before choosing the interface. One question: what voltage or signal type is produced by the equipment when the button/switch is activated? Message me with that information and I’ll outline the safest trigger-detection and audio-control approach before you commit. Kind Regards Prat PCB Must Innovations
$465 AUD in 7 days
6.4
6.4

Hi - Adelman here from Texas FEATHER 328P SIGNAL DETECTION - the key is identifying the control signal reliably before using it to trigger audio. I'd first check the electrical characteristics of the incoming signal, including voltage, polarity, and whether it is a momentary pulse or maintained switch. Then I'd configure the three Feather boards to detect the signal consistently and trigger the required audio output. I'd also account for input protection, debounce, and reliable operation so noise or repeated signals don't cause unwanted playback. I'll test the complete trigger-to-audio sequence before handoff. What are the voltage and signal type from the equipment, and how should the audio output behave when the signal is received? Looking forward to work with you.
$300 AUD in 5 days
4.0
4.0

Hello, I have experience in embedded systems, microcontrollers, electronics, and hardware-software integration. I can help modify the three Feather 328P boards to detect wired control signals from buttons, switches, or external equipment and trigger the required audio output. I will review the existing hardware, implement the signal detection logic, and test the audio triggering functionality to ensure reliable operation. I’m ready to discuss the existing setup and get started. Best regards
$500 AUD in 7 days
3.9
3.9

Hi, I’m an embedded systems engineer with hands-on experience in microcontroller firmware, signal detection, and hardware integration — exactly what this project calls for. For your three Feather 328P boards, the approach is straightforward: configure the appropriate GPIO pins as digital (or analog) inputs to read the incoming wired control signal — whether it originates from a momentary button, toggle switch, or an external control system output (e.g., dry-contact relay, open-collector line, or low-voltage logic). Once the signal edge or state change is detected in firmware, the board triggers the audio output accordingly, using a dedicated audio module, DAC, or PWM-driven amplifier depending on your existing hardware setup. A few things I’d like to clarify before diving in: What is the expected signal voltage/type from the control source? What audio output hardware is currently connected to the boards? Is the trigger momentary (one-shot) or sustained? These details will let me define the exact detection logic, debounce strategy, and audio trigger mechanism cleanly. I work solo and can turn this around efficiently. Happy to start with one board as a proof-of-concept before rolling out to all three. Looking forward to hearing more about the setup. Best, XinTian
$500 AUD in 7 days
3.4
3.4

Hi there Thanks for posting the project. With 8 years of relevant electronics and embedded systems design experience, I can help adapt your three Feather 328P boards to detect wired control signals and trigger the required audio output. My proposed approach Review the existing board connections and identify the incoming signal type, voltage, and trigger logic. Configure each board to reliably detect button, switch, or external control-system signals. Implement the required audio-trigger output and ensure reliable communication between the detection and audio circuits. Test all three boards and provide updated firmware, wiring documentation, and setup instructions. I’ll keep the solution modular so future signal changes can be accommodated easily. Could you share the current wiring diagram, signal voltage/type, and details of the audio equipment being triggered? Best Regards, Sidra https://www.freelancer.pk/u/sidratulm20
$250 AUD in 3 days
3.5
3.5

Adelaide, Australia
Payment method verified
Member since Nov 2, 2026
$250-750 USD
€250-750 EUR
₹600-1500 INR
$40-60 USD / hour
$30-250 USD
$3-10 NZD / hour
$250-750 USD
£20-250 GBP
₹12500-37500 INR
$1500-3000 USD
$30-250 AUD
$750-1500 USD
$30-250 USD
$250-750 USD
£250-750 GBP
₹1500-12500 INR
₹1500-12500 INR
₹1875 INR
£20-250 GBP
$250-750 USD