Ditutup

Build an Arduino powered energy monitor

The project is to design and develop an Arduino based energy monitor to keep track of and monitor two separate powerlines. The main objective is to monitor when each power lines come on and off line remotely using a web service (a separate project that will be developed later).

The meter must offer the following functionalities:

1. The meter must be able to take two power inputs (230V)

2. The meter must be able to monitor the following parameters (frequency HZ, Voltage, On and Off times of each power input line)

3. The meter must be able to send (encrypted) the reading (including unique meter ID) to a remote TCP IP server over GSM (GPRS) connection at set intervals (interval options are 1 minute, 5 minutes or every time the power comes ON and goes OFF)

4. The meter must functional with standard mains power (230V)

5. The meter must have a small internal back up battery to keep it running for when mains power is off (should remain on for at least 1 hour)

6. The meter must have onboard storage to stored a record of total accumulated hour (total number of hours each power input lines have been in ON position)

7. The meter must have a small LCD screen to display total accumulated hour (total number of hours each power input lines have been in ON position)

8. The meter has a button to switch between total accumulated hour of each power input lines

9. The meter doesn't have a reset button, reset is only possible through

for reference of similar project, please review the following (difference in this project is that the two power lines would need to connect directly to the Arduino energy monitor)

[login to view URL]

1. has a back up battery built in that can make the device work for 2 hours with no power

2. has a built in storage capacity

3. has an LCD screen to display the readings and measurements

4. Has GSM / GPRS module to send data to a server

deliverable within 4 weeks should work

as close to the final product as possible at least when it comes to the packing of all the modules together

functionality has to be complete based on the current requirements

Kemahiran: Arduino, Elektronik, Mikropengawal, Pengaturcaraan C, Kejuruteraan Elektrik

Tentang Klien:
( 0 ulasan ) Birmingham, United Kingdom

ID Projek: #34063055

47 pekerja bebas membida secara purata €1090 untuk pekerjaan ini

(53 Ulasan)
7.6
(88 Ulasan)
7.1
(104 Ulasan)
6.7
kingch91

Hi, With an experience of more than 7 years as an embedded software engineer and product lead, I can provide you with end-to-end IoT/embedded solution starting from your idea to its actualization and development; or an Lagi

€350 EUR dalam 10 hari
(161 Ulasan)
6.7
(86 Ulasan)
6.3
macroenergy

Thanks for Freelancer which gives chance to meet you. I hope you are good. I have read your description carefully and understand everything. I’m Electronics engineer who have 25 year experience on analog design, renew Lagi

€760 EUR dalam 7 hari
(71 Ulasan)
6.7
(6 Ulasan)
6.3
pankajauengg

Hello! I will assist you in making of this system. Kindly come over chat and plan the project for the same........................................

€500 EUR dalam 7 hari
(73 Ulasan)
6.2
(20 Ulasan)
6.0
kostyausha

Hello. I have read your project carefully and I understand it. I have over 10 years of experience in electrical engineering and PCB layout and circuit design and an electronics engineer. I am confident i can help with Lagi

€500 EUR dalam 7 hari
(7 Ulasan)
5.2
jitendrabaraiya

I have more than 9 years experience in embedded and IOT based hardware design and firmware development . So I can do your energy meter projects within a time limit with your satisfaction.

€22980 EUR dalam 90 hari
(11 Ulasan)
5.1
preetpalsingh33

hello sir, how are you. I read your proposal and i am interested in this project. Pls have a look on the link below. [login to view URL] https://www.freelancer.com/u/preetpalsin Lagi

€2000 EUR dalam 30 hari
(30 Ulasan)
5.2
Safeer143

Hello. I read your project description very carefully. I completed similar project as u mention in your description I also have good command in ARDUINO NANO I also have good knowledge in power energy monitor I also Lagi

€750 EUR dalam 7 hari
(18 Ulasan)
5.2
(19 Ulasan)
5.1
HarimohanG

Good day, I can design and develop an Arduino based energy monitor to keep track of and monitor two separate powerlines. After reading all the details I am pretty sure to execute this project according to your require Lagi

€400 EUR dalam 2 hari
(3 Ulasan)
4.8
Adeel2k14

Thanks for posting the project here I am electrical engineer. I have completed many projects in the field of embedded systems and electrical for my foreigner’s client based in USA, UK, Africa, Turkey, Canada, and Germa Lagi

€500 EUR dalam 7 hari
(24 Ulasan)
5.2
Lilywang70

Hello. I am a full-stack developer and have much experience for working on Smart IOT device, Embedded and Control System Design and so on. - My Experiences: *PCB Design & Layout - Eagle Cad, KiCard, Altium, PADS, 2-8 L Lagi

€700 EUR dalam 7 hari
(6 Ulasan)
4.7
ayesha0124

Hi there, How r u? I have had a look at ur project i can handle it well as i have experience in C Programming, Arduino, Electronics, Electrical Engineering and Microcontroller. I have worked on similar projects before Lagi

€750 EUR dalam 8 hari
(5 Ulasan)
4.5
mahmoudralizadeh

Hi what files do you need at the end? Do you need PCB to be design? Do you need to calculate the wattage? i am an electrical engineer with expert in microcontrollers and PCB design in Altium designer thanks

€350 EUR dalam 15 hari
(11 Ulasan)
4.3
(26 Ulasan)
4.2