
Closed
Posted
Paid on delivery
I’m building a compact pan-tilt head that can be driven remotely with a small camera module and a laser pointer ride on top of it. The primary goal is reliable pan-tilt motion and foundation for future development. Here’s what I need from you: • A motorized pan and tilt mechanism sized for a lightweight camera board and laser diode. • Control electronics (Arduino, Raspberry Pi, or similar—whatever you prefer) with firmware that exposes over serial communication. • A simple desktop or mobile interface so I can jog the rig manually, start/stop tracking, and toggle the laser. • Assembly instructions, wiring diagrams, and commented source code so I can reproduce the build. Acceptance test: demonstrate adequate homing and motion control. If you have ideas to improve stability, speed, or precision, I’m open to them.
Project ID: 40574445
65 proposals
Remote project
Active 9 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
65 freelancers are bidding on average $2,224 USD for this job

Hi I am an embedded systems engineer with over 16 years of experience. I have built motor control, camera/vision accessories, Arduino/Raspberry Pi based control electronics, serial protocols, and small electromechanical products from concept through working prototypes and production-ready documentation. For your pan-tilt module I would focus first on a reliable mechanical base with proper bearing support, repeatable homing, cable routing, and motor/driver selection sized for the camera board and laser load. The firmware can expose a clean serial command set for jog, home, position moves, tracking start/stop, and laser enable, with limits and safe states included. I can also provide a simple desktop interface for manual control and test operation, along with wiring diagrams, assembly steps, BOM guidance, and commented source so you can reproduce the build. A few details I would like to confirm are the approximate payload weight, desired pan/tilt angle range, expected speed/precision, and whether you prefer USB serial to a desktop app or a mobile/WiFi control option. I can also suggest improvements for stability, backlash reduction, laser safety interlock, and future object tracking expansion. Please contact me to discuss details.
$1,350 USD in 18 days
7.6
7.6

As an electrical engineer with extensive experience in Arduino and microcontroller programming, I believe I'm the perfect freelancer for your Remote Pan-Tilt Object Tracking Module project. My skills in the area include Digital Motor Control, Analog Design, Electronic Design, Power Electronics and Embedded Systems, which align well with the requirements of your project. For instance, my profound understanding of Digital Motor Control would be invaluable in ensuring reliable pan-tilt motion for your module. Additionally, my knowledge in Analog Design can help enhance stability, speed and precision- enhancing overall performance. Moreover, my proficiency in PCB design equips me to develop solid control electronics and provide clear wiring diagrams that would facilitate easy reproduction of the module. My meticulous approach to tasks ensures that I also craft comprehensive assembly instructions and well-commented source code. Essentially, choosing me means opting for a highly skilled professional who won't only deliver a functioning Remote Pan-Tilt Object Tracking Module but will also provide you with a platform for future development.
$1,125 USD in 15 days
7.5
7.5

Hello, We can design a compact, reliable pan-tilt system for your lightweight camera and laser module, focusing on smooth motion, accurate homing, and a scalable architecture for future tracking features. Our team has experience developing custom electromechanical systems, embedded control, and user-friendly interfaces with complete documentation. We'll provide the pan-tilt mechanism, control electronics, serial-based firmware, desktop/mobile control interface, wiring diagrams, assembly guide, and fully commented source code. Could you share your preferred payload weight and target pan/tilt speed or positioning accuracy? We are committed to delivering a reproducible system that passes the homing and motion-control acceptance test while recommending improvements for stability and precision where beneficial. Thanks
$750 USD in 10 days
7.2
7.2

Hi, how are you doing? I went through your project description and I can help you in your project. your project requirements perfectly match my expertise. We are a team of Electrical and Electronics engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas: Antenna Design (CST, HFSS) Embedded C Programming. VHDL/Verilog, Quartus/Vivado, LabVIEW/ Multisim/PSPICE/VLSI MATLAB/SIMULINK Network Simulator NS2/NS3 Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC, STM32 and ESP32. IDEs like Keil MDK V5, ATmel studio and MPLab XC8. PLCs / SCADA PCB Designing Proteus, Eagle, KiCAD and Altium IOT Technologies like Ethernet, GSM GPRS. HTTP Restful APIs connection for IOT Communications. Also, we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements.
$1,125 USD in 7 days
6.2
6.2

Hi, I'm a mechatronics engineer with extensive experience in pan-tilt mechanisms, camera/laser integration, Arduino/Raspberry Pi, and serial control. I will design a compact motorized pan-tilt head for a lightweight camera and laser diode, with control electronics, firmware exposing serial commands, and a simple desktop/mobile interface for jogging, tracking, and laser toggle. I'll provide assembly instructions, wiring diagrams, and commented source code. I'll ensure reliable homing and motion control. I'm ready to review your RFP and discuss payload and range requirements. Best regards, Justin
$1,000 USD in 1 day
5.8
5.8

⭐⭐⭐⭐⭐ Hello Jason, Your project is exactly the type of embedded mechatronics system I enjoy building. I reviewed the RFP and appreciate that you're prioritizing reliable motion control, clean documentation, and fully open-source deliverables under the MIT License. I have extensive experience developing ESP32, Arduino, Raspberry Pi, and STM32-based embedded systems, including precision motor control, pan-tilt mechanisms, camera platforms, laser integration, and custom firmware. My background covers mechanical design, PCB development, firmware, and complete system integration, allowing me to deliver a prototype that is both reliable and easy to reproduce. For this project, I would develop a compact pan-tilt assembly with accurate homing, smooth motion profiles, serial command interface, manual desktop/mobile control, laser switching, and a modular firmware architecture ready for future tracking features. All source code will be fully commented, with complete wiring diagrams, CAD files, assembly instructions, and build documentation provided under the MIT License as requested. Throughout development I'll validate homing accuracy, repeatability, travel limits, and overall stability before delivery, and I'll provide demonstration videos showing the acceptance tests. I'd be happy to discuss your preferred motors, camera module, motion requirements, and any future tracking roadmap before we begin. I look forward to collaborating with you.
$1,125 USD in 7 days
5.1
5.1

Hi, Having over 8 years of experience in embedded systems, robotics and hardware design, I can assist you in designing a compact, motorized pan-tilt object tracking module for your camera and laser system. The system will be designed around a lightweight pan-tilt mechanism for a camera module and laser pointer, providing smooth, accurate positioning while serving as a scalable platform for future enhancements. All work will follow IEC 60204-1 and IPC-7351 standards, ensuring proper design and safety protocol requirements. Before starting, please confirm the following: Q1. What is the maximum payload weight (camera + laser + mounting hardware) that the pan-tilt mechanism needs to support? Q2 Do you already have the camera module, laser diode and preferred motor type selected, or should I recommend the complete hardware configuration? Project Deliverables: • Compact Motorized Pan-Tilt Mechanism Design • Control electronics (Arduino, Raspberry Pi) with firmware • Simple desktop/mobile interface • Assembly instructions • Wiring diagrams • Electrical Schematic • Commented source code • Bill of Materials Tools I Use: • Arduino IDE • Raspberry Pi OS Looking forward to your confirmation so we can proceed. Warm regards, AbuBakar
$750 USD in 6 days
5.1
5.1

HI, I am an experienced electronics and PCB Design engineer, specialised in use of ECAD software such as Altium Designer, KICAD, EasyEDA, etc. for the the design of electronics and PCB. I will design your projects to meet your Requirements and the industry standard. I do all kinds of circuits such as Power delivery circuit, Sensor Integrated Circuits, wireless control, MCUs etc. I will deliver the following. The Schematics for your Design The PCB for the design Bill of materials(If needed) Gerber, Pick and Place and other manufacturing and assembly drawings needed. Full Support and consultancy till the project is done. Kindly send me message for my previous designs and also so we can discuss further on your project I look Forward to working with you. Best Regards, Abdur-Rafiq
$1,000 USD in 7 days
5.3
5.3

Hi Jason, I’m a Senior Embedded Systems & Mechatronics Engineer with 10+ years of experience developing precision motion-control systems, embedded electronics, and custom automation equipment. I have completed 80+ embedded and PCB projects, including stepper/servo motion platforms, STM32/Arduino controllers, and industrial automation systems with closed-loop positioning and serial communication. Approach ✅ I will design a reliable pan-tilt mechanism with stepper motors, homing sensors, and stable mechanical construction. ✅ I will develop the Arduino firmware with USB serial control, laser switching, and automated homing. ✅ I will provide CAD files, wiring diagrams, BOM, commented source code, and test the complete prototype before delivery. Questions ✅ I would like to confirm whether the required 0.01° positioning accuracy is absolute accuracy or commanded step resolution after gearbox/microstepping. ✅ Should I adapt the referenced MIT-licensed pan-tilt design, or do you prefer a completely custom mechanical assembly optimized for stiffness and precision? ✅ Will the Raspberry Pi host only send serial commands, or should I also implement the future object-tracking interface and communication protocol at this stage? Best, Yaroslav
$1,125 USD in 7 days
5.0
5.0

Dear Client, Most bids here will say, "I can build a pan-tilt mechanism." But developing a precision pan-tilt module with 0.01° positioning accuracy, reliable homing, serial control, and smooth stepper motion introduces several hidden challenges: mechanical backlash, vibration, motor tuning, payload balancing, limit sensing, laser alignment, and motion repeatability. PCB Must Innovations can help you develop your pan-tilt module using a risk-first approach, not just a mechanical design approach. With 30 years of experience in electronics, embedded systems, motion control, and product development, our focus is to deliver a stable, manufacturable, and reliable prototype that performs consistently from the first build. ✅ Where we will add value: 1. Precision pan-tilt mechanism with optimized stepper motor control and homing. 2. Robust electronics, serial communication, and laser integration. 3. Complete CAD, wiring diagrams, BOM, assembly documentation, and tested prototype. ✅ Suggestion: Finalize the motor selection, gearbox/direct-drive approach, and homing sensor placement before mechanical design. Profile: https://www.freelancer.in/u/electronicsdone ✅ Questions: 1. Do you prefer NEMA 17 steppers with TMC drivers or another motor platform? 2. Is ±180° pan required, or will ±45° satisfy the prototype requirements? OOPS, Character Limit Issue. Please message me in the chat section so I can cover more aspects of your project.
$1,000 USD in 12 days
6.3
6.3

As an Electrical and Electronics Design Engineer with more than 4 years of experience, I am confident that I have the skills you need to see your Remote Pan-Tilt Object Tracking Module project through successfully. My expertise in Embedded system design, firmware development, PCB layout, and hardware prototyping aligns perfectly with the task at hand. Over the years, I've successfully developed numerous custom electronics solutions from concept to completion, which makes me well-versed in addressing the challenges that may arise during your project's journey. I'm not just about completion; I always aim to provide an upliftment to my clients' existing ideas by offering valuable suggestions for improvements. That being said, I absolutely love the fact that you're open to optimizing stability, speed, or precision - because I am too! Furthermore, my proficiency in using Raspberry Pi and Arduino for control systems is unparalleled. This makes me more than capable of creating a simple yet intuitive desktop or mobile interface for you. Additionally, I assure you clear communication throughout the process- everything from assembly instructions and wiring diagrams to commented source code - so you can reproduce the build effortlessly. Choose me for this project, and let's bring your vision to life together!
$1,125 USD in 7 days
4.7
4.7

Hi, I have in house 3D printer, stepper motor and many microcontroller variant. I can help you design it, modify, and refine this product to manufacture ready stage. I have 11 years of experience in embedded system engineering. i helped design product from medical instrument to industrial refinery that most of them is using stepper. so let me know if you are interested
$1,200 USD in 7 days
4.6
4.6

As a seasoned Electronics Engineer with expertise in circuit design, PCB layout, and firmware development, I'm confident that I can fulfill your needs for this project. With over 8 years of experience, I've developed a strong skills set in Arduino hardware and microcontrollers - just what you need for the control electronics aspect of this pan-tilt object tracking module. Moreover, I'm familiar with working on projects from conception through design to implementation and validation. Thus, I can help not only with building a motorized pan and tilt mechanism designed for your lightweight camera board and laser diode but also provide thorough assembly instructions, wiring-diagrams, and well-commented source code to ensure easy replication of the build. Given the flexibility you've expressed in accepting improvements on stability, speed, or precision in the project, my deep knowledge in RF engineering can add an extra layer of value. Through unparalleled troubleshooting ability and system integration skills built over the years, I'm ready to make your pan-tilt module not only reliable but also future-oriented. Don't hesitate to make me a part of your team.
$1,125 USD in 14 days
4.4
4.4

Hi, I’m excited about your pan-tilt object tracking module project and confident in delivering a precise, reliable system. My experience in electronics and firmware development, especially using microcontrollers like Arduino and Raspberry Pi, fits perfectly for building the motorized pan-tilt mechanism you need. I will design custom control electronics and write clean firmware enabling easy serial communication for your remote control, ensuring smooth homing and motion. I’ll also create a user-friendly interface for manual jogging and laser toggling, plus thorough assembly instructions and wiring diagrams. I’m keen to discuss ideas to boost your system’s speed and stability as well. Let’s get started on this foundation for your future enhancements! If your pan-tilt could have a secret superpower, what would it be and why? Thanks,
$1,250 USD in 21 days
4.2
4.2

Hello, I’m an Electrical Engineer with 10+ years of experience in embedded systems, Arduino, ESP32, Raspberry Pi, robotics, and firmware development. Your pan tilt camera project aligns well with my expertise, and I can deliver a reliable, modular solution that is easy to reproduce and expand. I will design a compact pan-tilt mechanism using suitable servo or stepper motors, develop the control electronics and firmware with a serial communication interface, and create a simple desktop or mobile application for manual jogging, laser control, and future tracking integration. The system will include homing functionality, smooth motion control, and a clean software architecture so additional features can be added later. You'll receive complete source code with comments, wiring diagrams, assembly instructions, and all necessary documentation. Before delivery, I will demonstrate the homing sequence and motion accuracy to ensure the project meets the acceptance criteria. I can also recommend improvements such as acceleration/deceleration profiles for smoother movement, limit switches or Hall sensors for reliable homing, and microstepping or PID based control to improve stability, precision, and repeatability. I look forward to discussing your preferred hardware and helping bring this project to life. Best regards, Muhammad Azeem
$750 USD in 7 days
4.8
4.8

Hello, With your Remote Pan-Tilt Object Tracking Module project, I see a valuable opportunity to apply my extensive experience in mechanical design and manufacturing, particularly in building compact and functional mechanisms. My advanced skills in 3D modeling/CAD design will ensure the ideal sizing of the pan and tilt mechanism to fit your lightweight camera board and laser diode, guaranteeing reliable motion for your rig. Controlling the module through firmware that exposes over serial communication is an area where my skills with Arduino, Raspberry Pi, or similar systems come into play. Building on years of testing prototypes and optimizing mechanical systems for enhanced stability, speed, and precision, I'm confident I can add value to your project by further improving these aspects. Lastly, although I specialize in mechanical engineering, I understand the importance of coherent integration between hardware and software. That's why I offer to provide not only detailed assembly instructions and wiring diagrams but also commented source code for easier reproducibility. Let's collaborate on your project - I am committed to providing top-notch solutions that meet the defined requirements while enhancing your satisfaction. Thanks!
$1,000 USD in 5 days
3.3
3.3

Hello, I can design and develop a compact pan-tilt system for your lightweight camera module and laser diode, including the mechanical concept, motor selection, control electronics, firmware, and user interface. I have experience with Arduino, Raspberry Pi, servo and stepper motor control, serial communication, sensors, and embedded systems. I can implement reliable homing, position limits, smooth acceleration, manual jogging, tracking enable/disable, and laser control. The project will include commented source code, wiring diagrams, component recommendations, assembly instructions, and a simple desktop or mobile control interface. I will also test motion repeatability, homing accuracy, stability, speed, and communication reliability. For improved precision, I can recommend geared steppers, encoders, limit switches, and a rigid low-backlash mechanical structure. I am available to begin immediately.
$1,125 USD in 7 days
3.5
3.5

Hello, how are you? I can design and deliver a complete, working pan-tilt head with control electronics, serial firmware, and a simple joystick interface. Hardware Design: I will use two NEMA 11 or 28BYJ-48 stepper motors (or MG996R servos for lighter payloads) in a 3D-printed gimbal frame. The camera and laser diode mount on a shared top plate. An Arduino Nano or ESP32 serves as the controller, with A4988/TMC2208 stepper drivers or direct servo PWM control. End-stop switches or hall sensors enable reliable homing. A MOSFET or transistor circuit toggles the laser via firmware command. Firmware: Serial protocol over USB/UART. Commands include: PAN <angle>, TILT <angle>, HOME, LASER ON/OFF, STATUS. Smooth acceleration/deceleration profiles prevent jerky motion. Written in Arduino C++ with clear comments. User Interface: A Python desktop app (Tkinter or PyQt) with directional buttons for jogging, sliders for absolute positioning, start/stop tracking placeholder, and a laser toggle button. Runs on Windows/Linux/Mac. A web-based interface using WebSerial is also possible for mobile use. Deliverables: 3D-printable STL files, complete wiring diagram, commented Arduino firmware, Python GUI source code, assembly instructions, and a demo video showing homing and motion. Timeline: 2 to 3 weeks. Let's discuss your payload weight and whether you prefer steppers or servos. Best Regards,
$1,000 USD in 15 days
2.6
2.6

Hi Jason, Your Pan-Tilt Module project is an excellent match for my robotics and mechatronics background. I'm a Robotics Engineer with hands-on experience in mechanical design, embedded systems, Python, ROS/ROS2, Raspberry Pi, Arduino, sensor integration, and real-time hardware control. I've developed an autonomous agriculture robot using ROS, Python, SLAM, and Gazebo, integrating sensors, cameras, and controllers for reliable navigation. I also built a teleoperated pesticide spraying robot with cameras, actuators, and embedded control. Additionally, I trained a custom YOLOv8 model for real-time grape disease detection using OpenCV, giving me strong experience integrating AI with robotic systems. For your project, I can design the pan-tilt mechanism, integrate stepper motors, homing sensors, Arduino serial communication, Raspberry Pi interface, CAD models, wiring diagrams, firmware, and complete testing/documentation while adapting proven open-source designs where appropriate. My Robotics Portfolio: https://www.freelancer.com/service/robot_operating_system/robotics-engineer-ros-computer-vision?sb=t I'd be happy to discuss the design approach and project timeline. Looking forward to working with you.
$1,325 USD in 25 days
2.8
2.8

Greetings! I can design and build a compact pan-tilt head for your camera and laser module. I will select suitable motors and control electronics with firmware that exposes serial communication for reliable motion control. I will also create a simple desktop or mobile interface for manual jogging, tracking, and laser toggling. I will provide assembly instructions, wiring diagrams, and commented source code for reproduction. I will ensure homing and motion control meet your acceptance test. I can also suggest improvements for stability and precision. Let me know your payload weight and preferred control platform. Thanks, Revival
$750 USD in 14 days
1.5
1.5

Cleveland, United States
Member since Jul 10, 2026
₹150000-250000 INR
₹600-1500 INR
₹1500-12500 INR
$250-750 AUD
$30-250 USD
₹12500-37500 INR
₹600-1500 INR
$30-250 USD
$30-250 AUD
$10-80 AUD
$10-30 USD
₹12500-37500 INR
$750-1500 USD
€3000-5000 EUR
₹750-1250 INR / hour
$30-250 AUD
₹10000-20000 INR
₹600-1500 INR
$30-250 AUD
₹1500-12500 INR