
Closed
Posted
Paid on delivery
I’m developing a next-generation Bitcoin miner, internally labelled “400,000,” and I need an engineer or small team to drive the research-and-development phase. My priorities are clear: push Energy efficiency as far as current silicon will allow, unlock higher Processing power than today’s leading rigs, and experiment with new or optimised Mining algorithms. I also want the design to remain flexible enough to switch over to Bitcoin Cash should comparative profitability shift. At this stage the unit’s final home is undecided—my form literally says “Dinner,” which simply means I’ll be bench-testing the prototype in an ordinary room rather than a purpose-built data centre. Noise, thermal load and power draw therefore have to stay within limits a standard domestic circuit can support while we prove the concept. Here’s what I need from you: • A feasibility study that weighs ASIC versus FPGA paths and estimates achievable hash rates under a 3 kW ceiling. • Preliminary hardware architecture, complete with schematics, component list and cooling strategy. • Firmware or bitstream outlines showing how the proposed Mining algorithms will be implemented and updated. • A concise report benchmarking projected GH/W and total cost per unit against current market leaders. Success is met when the design shows, through simulation or small-scale prototyping, that we can sustain at least a 20 % efficiency gain or hash-rate uplift over mainstream miners without breaking the 3 kW envelope. If you have the right low-level hardware skills—Verilog/VHDL, RTL design, power-electronics know-how—and can document your work so we can pursue funding for full production later, I’d like to start immediately.
Project ID: 40768427
30 proposals
Remote project
Active 1 day ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
30 freelancers are bidding on average $150 USD for this job

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience in RTL design, power electronics and embedded firmware, supporting hardware development from concept through production. I can help assess whether “400,000” has a credible path to a 20% efficiency or hash-rate improvement within 3 kW. I would compare ASIC and FPGA options against current commercial miners, accounting for wall-power consumption, cooling overhead, room noise and estimated unit cost. Bitcoin and Bitcoin Cash share the same hashing algorithm, so switching would primarily involve mining-job and pool configuration. My $250 bid covers an initial feasibility milestone: projected hash rates and GH/W, preliminary hardware architecture, a cooling concept, firmware/bitstream outlines and a concise report suitable for early funding discussions. Detailed schematics, a validated component list and simulation or prototype validation would require separately agreed milestones. The study would establish whether the performance target justifies that investment. Are you open to using existing mining ASICs, and what mains voltage and acceptable noise level should I use for the room setup? Please contact me to discuss details.
$250 USD in 7 days
7.6
7.6

Hi, I’ve built FPGA miners that ran in production (the first FPGA Ethereum miner on HBM2, about $500K in revenue; 900 MHz timing closure on a Virtex UltraScale+), so I’ll be direct about your goals. Bitcoin efficiency: SHA-256d is where FPGAs lose to ASICs by a large factor in J/TH. A 20% gain over today’s leaders realistically needs custom silicon. I don’t do ASIC tape-out, and an FPGA prototype can’t prove a better J/TH than current ASICs. Bitcoin Cash uses the same SHA-256d, so switching is a pool setting, not hardware. “New algorithms” would break network compatibility, so I read it as optimising the implementation (midstate reuse, ASICBoost-style tricks, pipelining, voltage/frequency tuning). 3 kW: a 120 V, 15 A circuit gives about 1.8 kW, so you need 230/240 V and a real cooling plan. Phase 1, fixed price: a feasibility report with datapath options and RTL-level area/frequency estimates, a J/TH model for FPGA vs ASIC, power and thermal limits, GH/W and cost against current leaders, and a clear go/no-go. Which baseline miner do you want to beat, and is a custom ASIC in your funding plan? Duong Cong Duc
$250 USD in 7 days
7.1
7.1

As an experienced electronic hardware and firmware engineer, I believe I am the ideal candidate to drive your Bitcoin Miner R&D project of the unit "400,000". My extensive background in PCB design suits me to designing efficient printed circuit boards that suit your energy efficiency and performance objectives. With a particular specialization in power-electronics and AC-DC conversions, my designs always keep thermal load and power draw within manageable limits. My proficiency in VHDL and Verilog stands me in good stead for your requirement of assessing the feasibility of both ASIC and FPGA paths for increased processing power. My firm grasp over low-level hardware skills allows me to comprehend cryptosystems with ease, making firmware development a natural extension of my competencies. For your need of new or optimized Mining algorithms, my experience programming microcontrollers like STM32, DSPIC ensures quality implementations that deliver the desired hash-rate uplift. Your success criteria of a 20% efficiency gain is well within my range. As an electrical engineer proficient in C programming, I can deliver comprehensive reports benchmarking projected GH/W costs against market leaders. My purpose is to transform ideas into reality while creating reliable quality solutions - exactly what your project demands. Let's start immediately to prove the concept through simulation or small-scale prototyping!
$140 USD in 7 days
6.7
6.7

Hello, Wow, what a good match I am with this project post. Is custom ASIC fabrication within budget, or should we start with FPGA feasibility? I’d model SHA-256 throughput, GH/W, and thermal limits under 3 kW. I’ll compare architectures, estimate costs, and document a testable design before hardware investment. Best, Dev S.
$140 USD in 7 days
4.7
4.7

Hello, I can help structure the R&D phase for your “400,000” Bitcoin miner, focusing on feasibility, energy efficiency, processing performance, and domestic power constraints. I will assess ASIC versus FPGA architectures, estimate achievable hash rates within the 3 kW limit, and compare efficiency and cost against established mining hardware. The technical study will cover preliminary hardware architecture, power delivery, thermal management, component selection, and firmware or RTL implementation considerations for SHA-256 mining. I will also evaluate Bitcoin Cash compatibility, algorithm flexibility, and practical limitations before recommending a development path. The deliverables will include a documented feasibility report, preliminary design specifications, and benchmarking assumptions. Please share your target budget and existing hardware resources to define the next steps.
$120 USD in 7 days
4.2
4.2

Hi! ? I'm Ivan from Serbia. I came across your Freelancer.com profile and noticed it may not be actively in use and I wanted to connect with you. I have an idea for a potential partnership that could help us grow, earn more, and build something meaningful together. I believe the right collaboration can open doors we might not find on our own. I'd love to explain my idea in a quick 10-minute call. Since we're just getting to know each other, let's start with a friendly conversation and see where it leads! Would you be interested? If you're interested, I'd be happy to share more details. No pressure at all if it's not a good fit. Thanks for your time, and I look forward to hearing from you! Telegram : @future0429
$80 USD in 1 day
3.9
3.9

Hi - Adelman here from Texas BITCOIN MINER ASIC VS FPGA FEASIBILITY - you need a credible path to 20% better efficiency within a strict 3 kW power limit. I would start by comparing ASIC and FPGA performance, power draw, and thermal limits before committing to hardware. The key is proving the efficiency target with realistic benchmarks and a clear prototype plan. Would you prefer the first milestone to focus on the feasibility report and hardware architecture, or include an initial simulation as well? Looking forward to work with you.
$150 USD in 1 day
3.9
3.9

Hi, I can help evaluate your next-generation Bitcoin miner concept, focusing on energy efficiency, SHA-256 hashing performance, ASIC/FPGA architecture, and a practical design within your 3 kW power limit. The best approach is to first benchmark current ASIC miners, compare ASIC and FPGA implementation options, and calculate realistic hash-rate, power, cooling, and cost targets. I'll then develop a preliminary hardware architecture covering hashing devices, power regulation, controller interfaces, thermal management, and firmware requirements. Bitcoin and Bitcoin Cash share SHA-256 mining, so switching networks can be handled through mining software and pool configuration rather than separate hardware algorithms. The initial R&D deliverables will include: - ASIC vs. FPGA feasibility comparison - Estimated hash rate and power efficiency - Preliminary hardware block diagrams - Component and power-system recommendations - Cooling and noise-control strategy - Firmware/RTL implementation outline - BTC/BCH compatibility assessment - Cost and efficiency benchmark report - Prototype development roadmap I'll assess the 20% improvement target against verified hardware benchmarks rather than promise an unproven performance gain. My $100 quote covers the feasibility and preliminary architecture phase. Detailed schematics, RTL development, and physical prototyping can follow as separate milestones. Best regards Ankit
$100 USD in 2 days
4.1
4.1

Thanks for detail. I have experience in working on FPGA hardware acceleration and embedded system optimization. I understand this workflow well and can get you strong result quickly. I hope to discuss more about project on detail chat. Thanks Masoom
$90 USD in 30 days
3.3
3.3

Hello! I’m Md Touhidul Islam, a full-stack developer with 10+ years of experience in software development, technical research, and system integration. I understand you need a feasibility study for a next-generation Bitcoin miner, comparing ASIC and FPGA approaches, power efficiency, thermal constraints, and projected costs under a 3 kW limit. My relevant skills include Python, performance analysis, API integration, data processing, and technical documentation. i) Do you have an existing prototype, ASIC specifications, or FPGA development board? ii) Which target hash rate, efficiency baseline, and budget should guide the feasibility study? iii) Should Bitcoin Cash compatibility be a core hardware requirement or a separate evaluation? I can support software-side benchmarking, data analysis, and documentation, but specialized ASIC/RTL design and power-electronics engineering would need verification before I commit to those deliverables. Looking forward to hearing from you. Best regards, Md Touhidul Islam
$30 USD in 1 day
3.3
3.3

I can start right now I have checked the details. Pushing for that 20% efficiency gain on a 3 kW domestic circuit while keeping thermal and noise loads manageable for a room bench-test is a great R&D challenge, especially with the dual Bitcoin and Bitcoin Cash requirement. My questions: Are you leaning toward a specific foundry node for the ASIC path, or should we keep the FPGA architecture as our primary prototyping vehicle for the initial RTL design? For the deliverables, I will lock down the ASIC vs. FPGA feasibility study, draft the preliminary hardware architecture and cooling strategy, outline the mining algorithm bitstreams, and deliver the GH/W market benchmarking report. Let's do it. When would you like to schedule the kick-off?
$30 USD in 7 days
0.0
0.0

A 20% gain over mainstream miners under 3 kW is a tight target, and I get that the 400,000 has to run in an ordinary room on a household circuit, so noise and heat count as much as hash rate. I can take on the ASIC versus FPGA study, the schematics and the GH/W benchmark report for you. I'll stay on it and keep refining the documents until they're solid enough for your funding conversations. Do you already have a preferred FPGA board or silicon process in mind for the prototype? Happy to talk through the scope here whenever suits you. Sela
$140 USD in 7 days
0.0
0.0

Hello, The key challenge is achieving meaningful Bitcoin mining performance improvements while staying below 3 kW and managing the heat, noise, and electrical constraints of a domestic environment. I'd begin with an ASIC-versus-FPGA feasibility study, benchmarking leading miners using hash rate, J/TH efficiency, power consumption, and estimated hardware costs. Both Bitcoin and Bitcoin Cash use SHA-256d, so the architecture can support either network without requiring a different mining algorithm. The R&D focus would be optimizing computation, clocking, power delivery, and cooling. I'd develop preliminary hardware schematics, component specifications, thermal calculations, and RTL or firmware architecture, followed by simulation-based performance validation. Estimated milestones: 2 weeks for feasibility and benchmarking, 3 weeks for preliminary architecture, and a subsequent prototyping phase based on component availability. A 20% improvement over market-leading ASICs is an ambitious target, so I'd validate its technical feasibility before committing to production specifications. **Which existing mining rig should serve as the baseline for your 20% performance improvement target?** Happy to discuss a realistic R&D roadmap and measurable acceptance criteria. Nicolas
$120 USD in 4 days
0.0
0.0

Hello I have experience in ASIC/FPGA development, RTL design, Verilog/VHDL, power electronics, and embedded firmware. I can help develop your Bitcoin miner concept, focusing on energy efficiency, high hash-rate performance, and reliable operation within the 3 kW power limit. The key challenge is improving SHA-256 mining performance while controlling power consumption, heat, and noise. I'll evaluate ASIC and FPGA architectures, optimize the processing and power-delivery design, and assess compatibility with both Bitcoin and Bitcoin Cash. ☑️ **Scope of Work:** I will conduct an ASIC versus FPGA feasibility study, develop a preliminary hardware architecture, evaluate SHA-256 optimization opportunities, and outline the firmware, cooling system, and power management strategy. ☑️ **Deliverables:** Feasibility report, preliminary schematics, component list (BOM), firmware/RTL architecture, cooling recommendations, and projected hash-rate, efficiency, and production-cost comparisons against leading miners. **Timeline:** 7 business days for the initial R&D feasibility and architecture phase. I will also evaluate whether the targeted 20% performance or efficiency improvement is technically achievable through simulation and benchmarking before recommending prototype development. I can begin immediately. Do you have a preferred ASIC platform or FPGA family, or should I evaluate both from scratch? Thanks & Regards
$140 USD in 7 days
0.0
0.0

Hi there, The key challenge is proving a 20% efficiency or hash-rate improvement within the 3 kW domestic testing limit while keeping thermal output, noise, and algorithm flexibility manageable. I have strong expertise in solving this type of low-level engineering problem and will structure the R&D around ASIC-versus-FPGA feasibility, hash-rate and GH/W modeling, preliminary schematics, component selection, power delivery, and cooling. I will also develop firmware outlines using C Programming for control and monitoring, define updateable mining-algorithm interfaces, and document simulation or prototype benchmarks against current miners for funding-ready review. Best regards, Marko
$155 USD in 5 days
0.0
0.0

The 400,000 project is really about proving whether a domestic-scale Bitcoin miner can beat mainstream rigs on efficiency or hash rate without breaking a 3 kW ceiling. The unclear part is whether ASIC or FPGA gives the best path, and how much thermal and power margin remains for a room-tested prototype. I’d start with a feasibility study that compares both approaches, then narrow to the architecture with the best GH/W outcome. From there I’d draft the hardware block diagram, schematics, component list, and cooling plan, then map the firmware or bitstream flow for the chosen mining algorithm and update path, including a Bitcoin Cash switch if that becomes the better target. I’d benchmark projected GH/W and unit cost against current miners, and document the simulation or prototype results clearly so the design can support funding discussions for production. Regards, Savi
$155 USD in 17 days
0.0
0.0

Hi, I'm Stefan from Clavorn Collective. Your vision for the “400,000” Bitcoin miner is ambitious, and I appreciate the focus on energy efficiency and processing power within practical limits. We specialize in hardware R&D and have successfully delivered projects that push the boundaries of performance and efficiency. Our recent work involved optimizing ASIC designs for energy consumption while enhancing hash rates, resulting in significant performance gains. To achieve your goals, our approach will include: ▸ Conducting a thorough feasibility study comparing ASIC and FPGA paths to maximize efficiency under the 3 kW ceiling. ▸ Developing a preliminary hardware architecture, including detailed schematics and a cooling strategy suited for domestic environments. ▸ Creating firmware outlines to facilitate the implementation of optimized mining algorithms. I’ll be personally involved in ensuring we align with your objectives and maintain clear documentation to support future funding. Good projects usually start with one good conversation. Reach out, and let's explore how to bring your vision to life. Regards, Stefan Clavorn Collective
$150 USD in 14 days
0.0
0.0

Hi Adam Your 3 kW domestic power limit and target for a 20%+ efficiency gain are clear. The main challenge is balancing the low initial cost of an FPGA with the raw GH/W efficiency of an ASIC for flexible BTC/BCH algorithm switching. How I will deliver: -Feasibility & Benchmarking: ASIC vs. FPGA analysis under 3 kW to pinpoint maximum achievable hash rates. -Architecture Design: Schematics, BOM, and quiet, low-noise cooling for room bench-testing. -RTL & Firmware: Verilog/VHDL bitstream for optimized SHA-256 and flexible target switching. Ready to start the R&D immediately. Best regards, Ken, Senior ASIC/FPGA & Verilog Hardware Engineer
$140 USD in 7 days
0.0
0.0

Hi, client. I can take this through a proper R&D feasibility phase covering ASIC vs FPGA, RTL architecture, power delivery, thermals, firmware, and cost/performance modelling. One important technical point: Bitcoin and Bitcoin Cash both use SHA-256d, so BTC ↔ BCH flexibility does not require a different hashing engine. The same core can switch networks/pools through firmware and configuration. My preferred approach is ASIC-first for the production concept, with FPGA used for RTL validation, control logic, firmware development, and small-scale proof-of-concept testing. An FPGA is useful for development flexibility, but it is not realistically competitive with modern SHA-256 ASICs on hashes per watt. I would also benchmark at multiple operating points instead of designing for one maximum clock: efficiency mode, balanced mode, and performance mode. For a unit intended for an ordinary room, I’d treat thermal load and acoustics as first-class requirements rather than something to solve after the hash boards are designed. For the posted budget, I would scope the first milestone around feasibility, simulation, architecture, and preliminary electrical design. A genuine custom-ASIC tapeout and fabricated prototype is a substantially larger second-stage programme. I can start immediately with the 3 kW power envelope and SHA-256d compute model, then determine whether the 20% target survives realistic silicon, PSU, and cooling losses before committing to hardware.
$140 USD in 7 days
0.0
0.0

Hello, I understand you're looking to develop a next-generation Bitcoin miner with a strong focus on energy efficiency and processing power. Achieving a 20% improvement over existing models within a 3 kW limit is ambitious but entirely feasible. With my expertise in Verilog, VHDL, and RTL design, I can lead the feasibility study comparing ASIC and FPGA paths, providing you with a clear understanding of achievable hash rates. I will create a detailed preliminary hardware architecture, including schematics and a cooling strategy that meets domestic circuit requirements. Additionally, I can outline the firmware design for the mining algorithms to ensure smooth updates. I’m ready to discuss how we can move forward and bring this project to life. With regards, Maanie
$100 USD in 7 days
0.0
0.0

Memphis, United States
Member since May 14, 2025
$10-30 USD
$30-250 USD
$30-250 USD
₹1500-12500 INR
$15-25 AUD / hour
$30-250 USD
£10-20 GBP
$30-250 USD
₹750-1250 INR / hour
$15-25 AUD / hour
$250-750 USD
$30-250 USD
$1500-3000 USD
$30-250 USD
₹1500-12500 INR
₹12500-37500 INR
₹1500-12500 INR
₹12500-37500 INR
$250-750 USD