The project is to write an embedded software including a web server based on the Freertos and the uIP stack on a NXP LPC2468 based board, the board is a customized board that include a 256 MB SDRAM (ISSI IS42S16160D), 4 GB NAND Flash(Micron MT29F4G08ABADAWP), 8K EEPROM (M24C08) and the IP113S.
the board has two I2C connected and the UART port.
the request is to have the following installed:
- UART boot menu and firmware update.
the board has a Jtag connector, this will be connected to the Jlink pro debugger from Segger and connected to a computer where IAR Embedded workbench IDE (V 6.10) is installed, you will have avpn remote remote access to our system for debug and tests.
The webserver should include some common controls such as: username /password authentication, IP address management, GPIO control, System status, Firmware update, load default settings, reset function and backup/restore.
The system should also implement a telnet server, SSH server, SNMP and a dhcp client.
the delivery should be a comprehensive and well documented source code, and a working version on the board.
Also a brief user manual that include all written or edited functions (by the freelancer): name of the functions, input variables, outputs and brief description of the functions.
Some source code is already available (driver for the IP113S), but not tested. other tested such: system init, clock init, SDRAM driver, NAND Flash and UART driver but must be necessary reviewed.
other information could be delivered uppon request after signature of the NDA.
10 pekerja bebas membida secara purata $1153 untuk pekerjaan ini
I have extensive experience in embedding FreeRTOS with IP connectivity on ARM based systems, with a number of recent projects focussed on providing a web-based UI.