THIS IS AN EMERGENCY PROJECT - PLEASE BID ON THIS PROJECT ONLY IF YOU HAVE THE TIME TO WORK ON IT IMMEDIATELY.
We had a cisco 18xx router fail. Were trying to put a cisco 17xx in its place, and need the 17xx configured. The connection goes over a private t1 to a cisco 28xx. There are several sites that also connect to the 28xx, so the configuration of these other working routers should help you configure this one. I will provide:
the config of the 28xx and
the config of a SIMILAR 18xx that connects to the 28xx. (This would be the type of connection you would be setting up on the 17xx.)
You would get access to a machine via LOGMEIN to do the configuration on. The machine would be connected to the router via serial. I know this is not ideal, but this is all I can provide at the moment.
Once I accept the bid, i will email the configuration file info listed above, along with logmein credentails.
Then, you log in and configure the router. Dont worry about the minor stuff - were interested in getting this working quickly first.
Once you have the confgiuration written, someone will take the router to the remote site and plug it in. If it doesnt work we will go from there.
Need to be familiar with/have:
cisco router knowledge
a connection that will work over logmein
have a yahoo im account (my account is ksystems0000 or ksys0001) to talk over.
I am paying 100 USD with a 200 USD bonus if you can get this up and running within the next 8 hours.
If I get the feeling you dont know what you are doing or are learning on the job I will cancel the project with no payment.
thanks for your interest!
17xx info as follows:
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.3(23), RELEASE SOFTWARE (fc5)
Technical Support: [url removed, login to view]
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 24-Jul-07 14:47 by stshen
Image text-base: 0x8000816C, data-base: 0x80A75184
ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
GNCGLR17xx-01 uptime is 51 minutes
System returned to ROM by power-on
System image file is "flash:c1700-y-mz.123-23.bin"
cisco 1720 (MPC860T) processor (revision 0x601) with 24576K/8192K bytes of memor
Processor board ID JAD05072YWJ (2132287327), with hardware revision 0000
MPC860T processor: part number 0, mask 32
[url removed, login to view] software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
I am interested in bidding for this project. I read the description and I find myself capable to do this work. I have good knowledge and hands on experience in handling Cisco routers.