Ditutup

Build me a very small Radio Frequency Device

The device must give off a short "Bleep" of 0.1 sec every 3 seconds on frequencies between 149-151 MHz. (You may want to alter this as you see fit. But we must be able to stay in none licenced ranges or where inexpensive directional antennas and radios can be acquired)

Be able to transmitter said signal to a receiver with directional antenna over 500m-1km.

The device should have an OD of 8.5 and length of 50mm. The OD must step down at about 35% of total length. to about 6.5mm The deivce must be able to take 1 or 2 small batteries at the ticker end. The Batteries should be able to last a min of 12-24 hours.

The device needs to be able to handle some sort of impact so. Crystals must be avoided. As far as possible.

Costing should be based as follows.

1. Cost of the design phase.

2. Testing in lab

3. Testing in Field conditions

4. Review and changes

5. Production.

The device should preferably fall with in a few dollar per device constraint.

Expected production per month will be from 100- 5000. Depending on how well it performs.

Kemahiran: Elektronik, Kejuruteraan Elektrik, Rekabentuk Produk

Lihat lagi: how to make long range fm transmitter, spy fm transmitter, how to make a fm transmitter out of a radio, how to make a simple radio with household items, how to make a radio receiver, how to make a fm radio station, fm radio transmitter, how to make a radio transmitter from household items, build small linux system, build small linux system containing busybox, hours needed build small simple website, isp india radio frequency, radio frequency separation 450 mhz, build small linux distro, build small database, build streaming radio player iphone app, build flash radio, keyboard build small linux, build small linux busybox, build online radio station asp

Tentang Majikan:
( 0 ulasan ) Johannesburg, South Africa

ID Projek: #26358437

19 pekerja bebas membida secara purata $6737 untuk pekerjaan ini

(51 Ulasan)
7.8
ahmad5857

Hi Sir, I have 11 years of experience in hardware engineering and i run a smart team. We are a team of engineers and developers who are expert in wearable embedded systems. I have a RF/ Antenna engineer for embeddin Lagi

$5000 USD dalam 30 hari
(39 Ulasan)
6.7
amelectronics

Hello sir, I have experience in designing electronics circuits and can develop hardware compatible smartphone and PC based apps. I also have done a lot of IoT projects and can transform your idea into a fully working Lagi

$7000 USD dalam 30 hari
(50 Ulasan)
6.6
(21 Ulasan)
6.0
CoherentTech123

Dear Sir, I am an expert with more than 20 years of experience in Firmware development, prototyping and PCB Layouts. I have developed several wireless communication devices and modules in the past. Lagi

$5000 USD dalam 30 hari
(52 Ulasan)
6.2
(30 Ulasan)
5.4
dejanzivkovic93

Hello. I have been working as a firmware and hardware designer for 6+ years. I am sure I can complete it on time with high quality. In that sense, I think I am suitable persons you are looking for. If you give me a cha Lagi

$7500 USD dalam 20 hari
(10 Ulasan)
4.7
hsh564cf84accd96

Hi my Professional Aim is: (Services then Solutions then Satisfactions) I hope you are [login to view URL] an experience in this field from last 5 years i am sure i can do it perfectly with in a time and budget Able to deliver y Lagi

$5000 USD dalam 7 hari
(34 Ulasan)
4.8
ExpertSoul

Hello, I've complete MS Electric Engineering. I have plenty of experience in firmware development and micro-controller developments. I can write the firmware based on Arduino, Raspberry Pi, Pic, Atmega, FPGA, ARM, DSP, Lagi

$7500 USD dalam 12 hari
(3 Ulasan)
3.4
AustraliaMech3D

Hi, I can design radio frequency device for you with the specified dimensions and technical parameters using off the shelf microelectronics parts that are cheap and easy to [login to view URL] device will be shock proof with high Lagi

$5000 USD dalam 7 hari
(3 Ulasan)
3.4
Andrii0125

Hi, I have read your project description carefully, and I am very confident about your project. I have good experience with electronic device development using wireless technology. If you give me a chance to interview, Lagi

$6000 USD dalam 10 hari
(2 Ulasan)
3.2
saadwali001

Hello sir. I am expert in 1) Arduino/ Microcontroller 2) Matlab/Simulink 3) Wireless Technologies (BLE, WiFi, RF, GSM, GPS, ESP32/ESP8266, nRF51, nRF52) 4) Pspice/proteus/multism/pscad 5) Embedded & IOT Devices 6) Ele Lagi

$8000 USD dalam 30 hari
(1 Ulasan)
1.7
AlpDesignAt

Dear Ladies and gentlemen, I am a European PCB designer form Austria. You may expect European industrial standards electronics design and prototype production quality. I have RF design experience in the VHF frequency Lagi

$8000 USD dalam 60 hari
(1 Ulasan)
1.0
ArtShydlovskyi

Hey. We can develop such a device for you. But there are questions. For example, should the beep signal be somehow modulated or is it just a transmission of the carrier frequency? Should the antenna be included in the Lagi

$7500 USD dalam 7 hari
(0 Ulasan)
0.0
MihailOtel

Hello, I see you are looking for an electronic engineer who can design the small radio frequency device. I can help you with this project and start the project right away. I have 7 years of experience in several kind Lagi

$7500 USD dalam 7 hari
(0 Ulasan)
0.6
CreativeGuru100

Hello, As a professional electrical engineer with over 10 years of experience, I am very confident about your project because I have developed lots of custom RF devices with special frequency bands. In the past, I deve Lagi

$5000 USD dalam 30 hari
(0 Ulasan)
0.0
roumaankhan

Hi Sir/Mam, How are you today? I have read your project description clearly. I have developed many android and iOS apps as well as web development. I will do all of the tasks and will make sure that you will be satisf Lagi

$10000 USD dalam 30 hari
(0 Ulasan)
0.0
sushiRapid

we are a hardware product development company based out of Bangalore , India. We have worked with several multinational companies including Daimler: Mercedes Benz Research and development, Infosys, Bosch ETC. we will n Lagi

$8000 USD dalam 25 hari
(0 Ulasan)
0.0
pratiknandaniya

Hello, My client Greetings. I am Pratik. I have 2+ years of experience as Mechanical Design Engineer. I have Perfect skills of 3D Modeling, 3D Rendering by using Solidworks and Fusion 360. You can check my profile an Lagi

$5000 USD dalam 30 hari
(0 Ulasan)
0.0