
In Progress
Posted
Paid on delivery
I need a compact, handheld housing built around three laser diodes I already own— violet, green and red, each 10 mW in 8 mm line-collimated cans that run from 5 V. The finished module will serve as an experimental multi-spectrum light exposure device for personal research, so clean beam alignment, minimal stray light and basic user safety are essential. If you are local to Denver, CO and vicinity, you will be given preference. Here is what I’m bringing to the table and what I’m expecting from you: Materials needed, and their purpose: • Programmable microcontroller (e.g., Raspberry Pi Pico, ESP32, or Arduino Nano) to input oscillatory frequencies that control the diodes as a single unit, and a timer to select running time. • Oscillator specs: Each setting will have 4 programmable ‘slots’. These will repeatedly run in sequence for the selected running time. • USB computer connection and software required to connect the microcontroller to a computer to program oscillation frequencies. • Small OLED screen, push-buttons or switches, rotary encoder, to view and move between pre-programmed frequency sets. • USB rechargeable power supply. • Case --- using off the shelf parts or 3d printed (designed to accommodate the three 8mm diameter line-generating lasers and manage mild heat dissipation). • Switches to separately turn diodes on and off. • Any other internal wires needed to make connections. This includes: • Programmed Oscillations: Implement adjustable pulse-width modulation (PWM) to create specific frequency oscillations for the lasers. • Driver Circuitry: Design a safe, USB rechargeable power distribution system capable of driving three 5V, 10mW lasers simultaneously. • User Control: Integrate a simple interface (e.g., small OLED screen, push-buttons, a rotary encoder) to select between different programmed oscillation profiles Deliverables 1. Fully assembled modules (2–4 identical pieces, as agreed). --- The following may be optional: 2. CAD files and printable drawings for the enclosure 3. Schematic, wiring diagram and complete BOM. --- If you are not local: 4. Short video or photo log that shows the build and confirms correct operation of each wavelength. 5. Secure packaging and tracked shipping to my address. If you have experience with small-run prototyping, and neat design, let’s put these beams in one package.
Project ID: 40793506
78 proposals
Remote project
Active 2 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
78 freelancers are bidding on average $413 USD for this job

Greetings, I recently worked on a compact optical measurement device using STM32 and ESP32, where I handled PCB design, battery power circuits, sensor timing, and firmware development. That project also involved fitting multiple optical sensors into a small enclosure while keeping the electronics reliable. For your device, I would use an STM32 or ESP32 with four programmable PWM slots, USB configuration, an OLED display, adjustable timer, and separate laser controls. The main challenge will be keeping all three laser lines aligned while reducing stray light and ensuring safe operation, so I would pay particular attention to mechanical mounting, power protection, and laser safety. I estimate about 2 weeks for the first working prototype after receiving the parts, followed by another 1–2 weeks to assemble and test the remaining units. I'm not based in Denver, but I can provide build videos, testing results, and tracked shipping. Sincerely, Oleksandr Gergel
$500 USD in 7 days
8.4
8.4

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience developing compact rechargeable devices, taking electronics, firmware and enclosure designs from concept through production. I can build around your supplied lasers with careful attention to alignment, stray light and heat management. The controls would support four programmable slots repeating for the selected session time, an OLED interface and separate switches for each diode. I would also provide USB charging and a simple computer application to edit and save frequency profiles, with default-off startup and a master output cutoff. My $750 bid covers the design, firmware, configuration application, components and assembly of two units using your supplied lasers. Additional units can be priced once the design is agreed. For a remote build, I can provide a video showing each diode and the programmed sequence operating, plus secure packaging and tracked shipping. What frequency range, duty-cycle adjustment and duration do you need for each slot, and which computer operating system will you use? I estimate 14 days from receiving your diodes and confirming the specifications. Please contact me to discuss details.
$750 USD in 14 days
7.7
7.7

My embedded systems and electronics experience directly matches this handheld multi-diode module: I can combine microcontroller firmware, circuit design, and a compact physical assembly into one integrated prototype rather than treating the hardware and software separately. Using Arduino or another suitable microcontroller, I can implement four programmable frequency slots, PWM-based diode control, timed operation, wavelength-specific switches, and an OLED/rotary-button interface for selecting profiles. My skills in circuit design, electronics, electrical engineering, and embedded systems are well suited to creating the 5V power distribution, internal wiring, USB-rechargeable supply integration, and clean connections for the three laser cans. I can also support the enclosure and documentation aspects, including a compact arrangement for beam alignment, stray-light management, mild heat dissipation, schematic, wiring diagram, BOM, and build verification. I would be pleased to develop the 2–4 matching modules and provide a neat, reliable prototype solution.
$750 USD in 7 days
6.9
6.9

My product design and prototyping skills are well suited to developing a compact handheld enclosure for your three-diode module. I can focus on a clean, practical housing that accommodates the 8 mm line-collimated cans, supports neat internal wiring, limits stray light, and provides a comfortable layout for the controls and display. My background in 2D/3D modeling, rendering, and engineering-related work supports the enclosure and prototype-development side of this project. I can also prepare a clear visual representation of the assembled module and help develop a neat small-run design suitable for producing 2–4 identical pieces. The final design can account for diode positioning, mild heat management, switches, OLED/encoder placement, and access to the rechargeable power system. I would be glad to apply my product design and prototyping experience to create a professional, compact housing for your experimental device.
$280 USD in 1 day
6.2
6.2

⭐⭐⭐⭐⭐ Your compact multi-wavelength laser module sounds like an interesting electronics prototyping project. I can help develop a clean, integrated design that combines the three existing laser modules with programmable controls, rechargeable power, and a compact handheld enclosure. My proposed approach includes: • Microcontroller-based control for red, green, and violet laser channels • Four-slot programmable profiles with configurable timing and run duration • OLED display and rotary encoder or push-button navigation • Independent channel switches and controlled laser-driver circuitry • USB-rechargeable power system with suitable regulation and protection • Compact enclosure with secure module mounting and alignment provisions I would first verify the specifications of your existing laser modules and clarify the required oscillation frequencies, PWM duty-cycle ranges, and timing behavior. This will help ensure the electronics are compatible with the modules and that the interface works as intended. The initial prototype would be tested before producing 2–4 matching units. Optional deliverables could include enclosure CAD files, schematics, a complete BOM, and a photo or video record of functional testing. Please share the laser module datasheets or model numbers, desired frequency range, target battery runtime, and preferred enclosure dimensions. With those details, I can confirm the design scope and a realistic delivery schedule.
$500 USD in 7 days
5.8
5.8

Hi, I am an electronics and embedded engineer experienced with MCU control, PWM, OLED interfaces, rechargeable battery systems, compact PCBs, and small prototype builds. I can integrate your three 5 V laser modules into a clean handheld device with programmable frequency profiles, timer control, and individual diode switching. Approach: ✅ I will design the MCU, power/charging circuit, laser drivers, OLED/controls, and USB programming interface. ✅ I will develop firmware for four frequency slots, sequential operation, timer settings, PWM control, and stored presets. ✅ I will design the enclosure and assemble/test 2–4 working units with proper alignment, heat management, and safety features. Questions: ✅ What frequency and duty-cycle ranges are required? ✅ Should all three lasers pulse together or independently? ✅ What battery runtime and enclosure size do you prefer? Best, Yaroslav
$500 USD in 7 days
5.7
5.7

Greetings Client, I can develop this compact handheld laser device, integrating the three diode modules, programmable electronics, power management and user controls into a clean, ergonomic enclosure. I recently completed a TCM handheld device project, giving me relevant product development experience for this type of compact, integrated hardware design. My background includes Mechatronics Engineering, microcontroller programming, electronic circuit design, SolidWorks, PCB design and 3D printing. I can handle the microcontroller firmware for the four-slot PWM oscillation profiles and timers, OLED and rotary encoder interface, power distribution, independent laser controls, and a custom enclosure with accurate diode alignment and heat management. I’ll also provide the wiring documentation, BOM and CAD files, with testing footage of the assembled prototype. Although I’m not based in Denver, I can coordinate the build remotely and arrange tracked shipping. I’d be glad to discuss the frequency requirements and get started.
$750 USD in 5 days
5.9
5.9

3D printing and rapid prototyping, supported by circuit design, electronics and product design skills, make me well suited to develop the compact handheld enclosure for your three-diode module. I can create a clean, practical housing that accommodates the 8 mm laser cans, controls stray light, supports neat internal routing and allows appropriate heat management. My experience with AutoCAD, CATIA, Rhino, SolidWorks, Blender and other 3D modeling tools supports precise enclosure design and printable CAD development. Combined with my electrical engineering and circuit design skills, I can contribute to the module’s power distribution, diode switching, controller integration, wiring and user-facing layout. I can also provide the optional CAD drawings, wiring documentation and BOM where applicable. I would be pleased to develop a neat, repeatable housing and integrated prototype for your small-run experimental device. Choose me to turn the concept into a practical handheld package.
$250 USD in 2 days
5.8
5.8

Hello there, Your triple-diode handheld module requires careful optical alignment, compact Product Design, controlled electronics, and a practical enclosure; I can turn these requirements into a clean, repeatable prototype plan. I will develop the housing around the three 8 mm line-collimated cans, organize the 5 V power and switching, and integrate the microcontroller, PWM profiles, OLED, controls, timer, and rechargeable supply. I can also prepare clear wiring documentation, enclosure files, and build photography while maintaining a neat, serviceable Design suitable for small-run fabrication. The final documentation can be organized for Print and assembly reference, including the BOM and safety-focused operating notes. I will begin by confirming the diode dimensions, desired oscillation ranges, enclosure constraints, and documentation scope before producing the first layout. Could you provide the required oscillation-frequency ranges, preferred enclosure dimensions, and the specific rechargeable battery or USB power-bank constraints? Best regards, Sahil
$250 USD in 1 day
5.5
5.5

I can help develop a compact, neatly organized handheld prototype around your three existing laser modules, with particular attention to beam alignment, enclosure design, control electronics, and repeatable assembly. The proposed design can include a microcontroller-based interface, OLED display, rotary encoder, programmable four-slot operating profiles, timer, individual diode switches, USB-rechargeable power, and a custom 3D-printed enclosure. I'll also plan the wiring, power distribution, and mounting so the three modules remain securely aligned. For the prototype, I can provide the enclosure CAD, circuit schematic, wiring diagram, BOM, firmware, and documentation, subject to confirming the laser modules' electrical specifications and safety requirements. Any assembled unit should include appropriate beam containment, an emission indicator, and safeguards against accidental exposure; PWM control should not be treated as a guarantee of safe exposure. Before finalizing the design, please share the exact laser module datasheets or product links, your preferred enclosure dimensions, and the intended operating environment. We can then agree on the prototype quantity and milestones. Best regards,\ Sakshi
$250 USD in 1 day
5.5
5.5

Okay, I got what you want exactly. I am an Embedded Electronics Engineer with 10 years of experience, providing microcontroller programming, PWM control, laser driver circuits, battery-powered electronics, and compact PCB design. In my opinion, I would build a compact handheld module integrating your three 5 V laser diodes, a programmable microcontroller, an OLED display, and simple controls for selecting frequency profiles and running time. I would implement four sequential timing slots per profile, independent diode switches, USB connectivity for configuration, and rechargeable power management. This project is very similar to my previous works. I have experience with embedded systems, power electronics, custom PCB design, and hardware prototyping. I would focus on clean wiring, stable power delivery, repeatable timing, compact enclosure integration, and straightforward firmware updates from a computer. Two important questions: What frequency range and pulse-width limits should each of the four slots support? Also, do you prefer USB-C charging with the device operating while charging? I would include appropriate beam shielding, individual output controls, and clear safety indicators, with the optical arrangement designed to minimize stray exposure. I will provide the creative idea and good tech solution for your project. Best regards. Maksym
$500 USD in 7 days
5.0
5.0

My circuit design, electrical engineering, and prototyping skills align directly with building compact multi-diode modules around your existing 5 V laser cans. I can develop the driver and power-distribution circuitry, wiring, switching, and control electronics needed to operate the violet, green, and red diodes as one coordinated unit while keeping the enclosure neat and practical. My background also includes PCB layout and control engineering, supporting the programmable PWM operation, timer functions, user controls, and microcontroller integration described in your specification. I can contribute to the small-run prototype design, including a compact housing concept, thermal considerations, beam alignment, stray-light reduction, and documentation such as schematics, wiring diagrams, BOM, and enclosure drawings where required.
$250 USD in 7 days
5.0
5.0

My background in physics, electromagnetism, electricity and magnetism, heat, and computational modeling aligns well with developing a compact multi-spectrum laser module where electrical control, beam behavior, and heat management must work together safely. I can contribute to the electrical engineering aspects of the design, including the 5 V power distribution for three low-power diodes, PWM-based oscillation concepts, timer logic, wavelength-specific switching, and technical documentation such as schematics, wiring diagrams, and a complete BOM. My experience with MATLAB and physics-based modeling can also support analysis of the programmed frequency behavior and operating conditions, while my technical writing skills are useful for producing clear assembly and operating documentation. I would be glad to support this small-run prototype with a careful, research-oriented approach and help turn your three diode sources into a clean, well-documented handheld design.
$500 USD in 7 days
4.7
4.7

✅✅✅✅✅ I can help develop a compact handheld module around your existing 8 mm violet, green, and red laser cans, with programmable timing, rechargeable power, and a straightforward user interface. I propose using a Raspberry Pi Pico or similar microcontroller, an OLED display, rotary encoder, and buttons to select and configure profiles. Each profile can contain four sequential timing slots and repeat for the selected runtime, provided the laser modules support the required modulation method. The electronics will include a regulated 5 V supply, USB charging and battery protection, individual laser controls, and suitable switching circuitry. I will first verify the laser modules' electrical inputs and PWM requirements to avoid damaging their integrated drivers or compromising output stability. I can also design a compact enclosure with fixed alignment mounts, charging and USB access, and an emission indicator. The build will include a master enable and protection against accidental activation. Deliverables: Fully assembled prototype units, subject to agreed quantity and shipping Firmware and computer interface for configuring profiles Wiring diagram, schematic, and BOM Optional enclosure CAD and printable files Before estimating a fixed price, I would need the laser module datasheets, required frequency range, battery-runtime target, and confirmation of whether the three lasers must pulse together or independently.
$500 USD in 7 days
4.4
4.4

Hello, I can help develop the compact handheld enclosure and mechanical design for your triple-diode module, focusing on a clean layout, precise diode positioning, accessibility, and effective heat management. I can create a detailed 3D CAD model with mounting provisions for the three 8 mm laser cans, microcontroller, OLED display, controls, rechargeable battery, and internal wiring. The enclosure will be designed for practical assembly, a comfortable handheld form, and minimal stray-light exposure around the optical components. I can also provide printable enclosure parts, assembly drawings, and a clear internal component layout. For the electronic driver, PWM control, and laser safety verification, I would recommend working with a qualified electronics engineer to validate the circuitry and operating parameters. I would be happy to review your component dimensions and discuss the prototype requirements.
$250 USD in 3 days
4.1
4.1

Hi, I can help develop a compact handheld controller integrating your three laser modules, programmable microcontroller, OLED interface, and rechargeable power system. I'd recommend an ESP32-based architecture for flexible frequency programming, USB connectivity, and user controls. **Proposed implementation:** - Three independently controlled laser channels - Four programmable frequency slots per profile - Sequential oscillation with adjustable running time - OLED display with rotary encoder and navigation buttons - USB connectivity for configuring frequency profiles - Rechargeable battery with charging and protection - Independent laser switches and master enable - Compact 3D-printed enclosure for the three 8 mm modules - Appropriate electrical protection and thermal considerations **Deliverables:** - KiCad schematic and PCB files - ESP32 firmware with documented source code - Enclosure CAD files - BOM and wiring documentation - Assembled prototype(s) - Functional testing video and setup instructions I'll first verify the laser module specifications and modulation requirements before finalizing the driver circuitry. Safety measures will include emission indicators and protection against unintended activation. Could you share the laser datasheets, required frequency ranges, and preferred number of assembled units? Best regards, Ankit
$500 USD in 7 days
4.3
4.3

I understand you're looking for a compact, handheld housing for three 5V laser diodes, similar to the need for precise control and integration I've addressed in projects involving custom optical assemblies and miniaturized control systems. My experience with integrating multiple optical components into a robust, user-friendly enclosure ensures clean beam alignment and minimal stray light. My approach will involve designing a 3D-printable enclosure using SolidWorks, optimizing for ergonomics and component fit. I'll integrate a small microcontroller (like an ESP32, which offers Wi-Fi/Bluetooth and sufficient I/O) to manage the 5V power distribution and individual diode activation. Precision mounts for the 8mm laser modules will be critical, likely incorporating adjustable set screws for fine-tuning alignment. Basic safety features will include a physical interlock or a timed auto-shutoff. How do you envision the user interface for controlling the diodes (e.g., individual buttons, a single multi-function button, or app-based control)? Are there specific environmental considerations for this personal research device, such as dust or moisture resistance? I'm happy to discuss these details further to ensure the final module perfectly meets your research needs.
$582 USD in 21 days
4.3
4.3

Dear Client, I can develop the complete handheld triple-diode module, including the control electronics, PWM profiles, user interface, rechargeable power system, enclosure integration, assembly, and functional testing. PCB Must Innovations has 30+ years of experience in electronics/PCB development across embedded controllers, PWM systems, battery-powered products, displays, user interfaces, power electronics, and prototype integration. I can design the MCU-based controller with four programmable frequency slots per profile, selectable run time, OLED/encoder/button interface, USB programming, independent diode enable controls, and protected 5 V power distribution for all three laser modules. For the enclosure, I can coordinate the three 8 mm modules, alignment, wiring, heat management, and service access. I would also include appropriate electrical protection and basic laser-safety provisions such as controlled enable, startup-off state, and clear operating indication. One question: do you want all three wavelengths to follow the same PWM frequency simultaneously, or should each diode eventually support independent frequency control? Message me with that answer and I’ll outline the control architecture and prototype build path before you commit. Kind Regards Prat PCB Must Innovations
$465 USD in 7 days
6.4
6.4

My Arduino, electronics, and microcontroller skills directly match the core of your handheld triple-diode module: controlling three 5 V laser diodes, integrating user controls, and creating a compact programmable device. I can work with the required microcontroller logic for selectable oscillation profiles, four sequential programmable slots, adjustable PWM, timers, and independent diode switching. I am comfortable working on small-run prototypes and can provide the assembled modules along with the requested wiring documentation, BOM, enclosure files where applicable, and operation records. Choose me to turn your three wavelengths into a clean, usable experimental handheld device.
$250 USD in 1 day
3.9
3.9

Hello, In my opinion, the key to this project is to combine precise microcontroller timing, reliable power management, clean optical alignment, and a compact enclosure into a well-organized prototype that is easy to operate and test. I would approach this as a small-run electronics prototyping project, focusing on a neat internal layout, straightforward controls, and a design that can be replicated consistently across 2–4 units. Before selecting the final components, I would clarify what you mean by oscillation frequency and how the four slots should behave—for example, whether each slot specifies a pulse frequency, a duty cycle, a duration, or a combination of these. This is important to ensure the firmware matches your intended experiment. To get started, please share the exact laser module datasheets or product links, your desired frequency and timing ranges, and your preferred battery runtime. I can then assess the component choices, enclosure dimensions, and practical scope for a consistent 2–4-unit build. My goal is a compact, maintainable prototype with clearly documented electronics, repeatable operation, and a professional finish. Best regards Zhai Kun
$250 USD in 3 days
3.8
3.8

den, United States
Payment method verified
Member since Mar 26, 2012
$30-250 USD
$8-15 USD / hour
$250-750 USD
$30-250 USD
$250-750 USD
₹12500-37500 INR
₹1500-12500 INR
₹12500-37500 INR
$10-30 USD
$250-750 USD
€8-30 EUR
₹1500-12500 INR
₹1500-12500 INR
$30-250 USD
$25-50 USD / hour
€12-18 EUR / hour
₹5000-6000 INR
₹12500-37500 INR
₹1500-12500 INR
$30-250 CAD
₹1500-12500 INR
$10-30 USD
$30-250 USD
$30-250 NZD
£150-350 GBP