
Closed
Posted
Paid on delivery
I need a compact, vehicle-mounted LED VMS that fits inside a 100 × 30 × 30 form factor—or slimmer if you can manage it—while still giving me bright, readable messaging in traffic. The unit must handle animated text as well as directional graphics, using changeable LEDs or a full matrix RGB setup so I can swap colours on demand. Core messages and symbols the board must cycle through: • “UNFALL”, “GESPERRT”, “ÖL SPUR”, “BITTE FOLGEN”, “STOP” • Animated arrows: left, right, and a dual arrow that grows out from the middle For reference, the overall behaviour should look similar to the product shown in this short clip: [login to view URL] I’ll supply the exact word list and arrow timings once we start; what I need from you is the complete working package—electronics design, firmware, and a simple control interface (web, app, or handheld keypad, your choice) that lets me push new messages or trigger one-touch presets. Deliverables 1. Circuit and PCB files for the LED matrix, driver, and controller 2. Firmware with animated text and arrow routines pre-programmed 3. Control interface source and build instructions 4. Mechanical drawings that prove the assembly stays within 100 × 30 × 30 5. A short demo video or simulation confirming brightness and animation speed Acceptance criteria • All listed texts and arrows animate smoothly and legibly at typical roadside distances • Colour changes are selectable per message • Brightness is daylight-visible yet dimmable for night use • No dimension exceeds the stated envelope once the housing is fitted If you have experience with vehicle VMS boards, CAN bus, or low-power RGB matrices, let’s get this on the road.
Project ID: 40774597
101 proposals
Remote project
Active 12 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
101 freelancers are bidding on average $170 USD for this job

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience with LED displays, embedded controls and complete product development, from initial electronics design through firmware, enclosure integration and production support. I can develop your VMS with smooth German text and arrow animations, selectable colours, daylight brightness and night dimming. A simple local web interface would let you update messages and trigger presets. I would account for vehicle power protection and heat management while keeping the assembly within the confirmed dimensions. I would deliver the circuit and PCB files, firmware, interface source and build instructions, mechanical drawings, and an animation simulation with brightness calculations. Physical prototype testing would then confirm actual roadside readability. Are the 100 × 30 × 30 dimensions in centimetres or millimetres? Is the vehicle supply 12 V or 24 V, and do you expect prototype fabrication to be included? My $500 bid covers the design and simulation package, excluding fabrication. The amount above your budget reflects the combined electronics, firmware, controls and mechanical scope; I am flexible on scope. I can target delivery within 14 days once the dimensions and requirements are confirmed. Please contact me to discuss details.
$500 USD in 14 days
7.7
7.7

Hello, I can develop a compact vehicle-mounted LED VMS with animated German messages, directional arrows, and selectable RGB colours. I will handle the LED matrix selection, controller and driver PCB, firmware animations, and a simple control interface with one-touch presets and editable messages. I will also consider daylight visibility, automatic or adjustable brightness, night dimming, vehicle power protection, and thermal management. I will verify the mechanical layout against your 100 × 30 × 30 envelope and provide circuit files, firmware source, control interface, and assembly drawings. Please confirm whether these dimensions are in centimetres or millimetres, and whether the unit must operate from a 12 V or 24 V vehicle supply. Regards, Engr Muhammad Usman
$140 USD in 7 days
6.9
6.9

With my extensive skills and experience, I am confident that I can deliver an exceptional Vehicle LED VMS Display Design for you. Having excelled in Animation, Graphic Design, and Branding, I understand the need for vibrant yet legible messaging that you are seeking. I am adept at creating animated texts and directional graphics that not only catch attention but also effectively communicate messages. Furthermore, my proficiency in 2D & 3D Modeling ensures that I can design a compact, vehicle-mounted LED VMS that fits within your given form factor comfortably whilst maintaining the same high-quality performance as depicted in the Youtube clip you linked. I also have working knowledge of low-power RGB matrices which would facilitate the operation of the LEDs or a full matrix RGB setup with changeable colors as per your preference. Preparing circuit and PCB files for the LED matrix, driver, and controller as well as firmware with all required routines will be seamless for me. My proven abilities to create simple yet effective control interfaces will enable me to give you options like web, app or handheld keypad depending on your convenience to trigger one-touch presets or push new messages smoothly. I also guarantee bright lighting dimmable for night use within the specified envelope size.
$60 USD in 1 day
7.0
7.0

Drawing from my extensive background in circuit and PCB design, electronics, embedded systems, firmware development, and web development, I am well-equipped to take on your Vehicle LED VMS Display Design project. Over the past 5+ years at Rashid Tech Solutions, I have dedicated myself to building reliable solutions where software, hardware, and cloud technologies work in perfect harmony - precisely what your project needs from start to finish. In the realm of electronics and embedded systems, I deal with low-power RGB matrices regularly. This experience synergizes with my proficiency in Circuit Design and Electronics equipping me with valuable insights into your project requirements and limitations. My skills as a Web Developer also extend fittingly to your need for a simple control interface that lets you push new messages or trigger one-touch presets via a web, app or handheld keypad. Moreover, my Mechanical Engineering competence guarantees that we won't overlook the crucial aspects of your project like achieving the form factor with no extra dimension exceeding stated envelope once the housing is fitted. At Rashid Tech Solutions, team and delivery are made sure by providing multidisciplinary support covering all areas relevant to this project — software (including firmware) cloud (for control interface) electronic(embedded) systems and engineering
$250 USD in 7 days
6.8
6.8

With over a decade of experience in various engineering and design capacities, I have honed my abilities to create innovative solutions within specific parameters. Your vehicle LED VMS display is an intriguing challenge that showcases my expertise beautifully. My proficiency lies in mechanical housing design, low-power RGB matrices, circuit and PCB design and layout, which are all key components for executing this project seamlessly. While your specific form factor requirements are demanding, I believe you'll find my results will exceed your expectations. Through using software such as AutoCAD, 3D Max and Rhino, I can ensure the assembly stays within your dimensions while meeting safety, durability and functionality benchmarks. Additionally, my knowledge of CATIA and Abaqus will provide streamlined casing designs for both space optimization and effective mounting on a vehicle.
$140 USD in 3 days
6.2
6.2

⭐⭐⭐⭐⭐ I can help develop this compact vehicle-mounted VMS from optical and mechanical feasibility through PCB design, firmware, and a working control interface. I’d start by evaluating the available display area, viewing distance, LED pitch, daylight brightness, and thermal limits. That will help determine whether a high-brightness RGB matrix or a purpose-designed LED layout delivers the best readability within your 100 × 30 × 30 envelope. Proposed deliverables: Editable schematic and PCB files, LED drivers, controller, and BOM Firmware for “UNFALL,” “GESPERRT,” “ÖL SPUR,” “BITTE FOLGEN,” and “STOP” Smooth left/right arrows and a dual arrow expanding from the centre Per-message colour selection, adjustable animation speed, and day/night brightness control A simple control interface with one-touch presets and editable messages Mechanical drawings, build instructions, and a demo video or simulation I’d also account for vehicle power transients, heat dissipation, weather exposure, and reliable operation. I would validate readability and animation performance against agreed test conditions rather than promise roadside visibility based on the display specification alone. Before selecting the LED architecture, could you confirm whether the dimensions are in centimetres, the intended viewing distance, and whether you prefer wireless control or a physical keypad?
$140 USD in 7 days
5.8
5.8

Hi, I am an embedded hardware/firmware engineer experienced with LED matrix control, vehicle electronics, MCU-based animation, CAN/serial interfaces, and compact power-efficient display systems. I can develop the complete VMS package from LED/driver architecture through firmware, control interface, PCB, and mechanical integration inside the 100 × 30 × 30 mm envelope. Approach: ✅ I will define the matrix resolution, LED type, driver architecture, viewing distance, brightness target, current budget, thermal limits, and 12 V vehicle power protection first. ✅ I will design the controller/driver PCB and firmware for smooth animated text, left/right arrows, expanding dual arrows, per-message color selection, and automatic/manual dimming. ✅ I will add a simple control interface—likely web-based over Wi-Fi/BLE or a compact wired keypad—for presets, message updates, color, and brightness control. ✅ I will deliver PCB/manufacturing files, firmware, interface source, mechanical drawings, and a simulation/demo showing the required animations and daylight/night brightness behavior. Questions: ✅ Is the 100 × 30 × 30 dimension in mm or cm, and does it include the full housing? ✅ What minimum readable distance and viewing angle should the sign achieve? ✅ What vehicle supply must be supported—12 V only or 12/24 V—with load-dump/transient protection? ✅ Do you require CAN-bus control, or is Wi-Fi/BLE/keypad control sufficient for the first version? Best, Yaroslav
$140 USD in 7 days
5.9
5.9

Hi, I've reviewed your project details and have a clear understanding of what you're looking to achieve. I'm confident I can help bring your project to life with a strong focus on quality, functionality, and timely delivery. My approach is simple. I'll start by understanding your exact requirements, then work through the project step by step, keeping you updated throughout the process. I'll also make sure your feedback is incorporated so the final result meets your expectations. I do have a few questions to clarify the scope and ensure we're on the same page before getting started. I'd be happy to discuss the details with you and explore the best way to move forward. Looking forward to hearing from you!
$30 USD in 1 day
6.1
6.1

Hello, I have strong experience with LED matrix design and animation firmware on STM32/ESP32, including RGB driver boards and CAN-bus vehicle electronics, so I can deliver your VMS package: the LED matrix, driver and controller PCB, firmware with animated text and arrow routines, and a simple control interface — web app over Wi-Fi/BLE or a handheld keypad, your choice — for pushing new messages and one-touch presets. For the 100 × 30 × 30 envelope the LED pitch decides everything, so I would first fix the matrix resolution and driver (addressable RGB or a scanned driver), then design board and firmware so UNFALL, GESPERRT, ÖL SPUR, BITTE FOLGEN and STOP plus the growing dual arrow animate smoothly and stay legible at roadside distance, with per-message colour and day/night dimming. I should be upfront: the electronics, firmware and control interface are my core; I can supply exact board dimensions and clearances for your enclosure. So let's discuss your project in chat. Best regards, Hamza
$30 USD in 1 day
5.4
5.4

Hello, I can handle the complete electronics, PCB, and firmware development for this compact vehicle-mounted VMS, including RGB LED control, animated German messages, directional arrows, adjustable brightness, and one-touch presets through a simple control interface. I’ll focus on achieving the required 100 × 30 × 30 mm envelope while balancing daylight visibility, readability, thermal performance, and power consumption. I can also provide mechanical drawings, manufacturing files, and a simulation demonstrating the animations before fabrication. I’ll review your reference video and define the most suitable LED matrix architecture for the available space.
$140 USD in 7 days
5.6
5.6

With over [number] years of experience in circuit design, electronics, and PCB layout, I pride myself on my comprehensive skill set that is specifically geared towards a project like yours. I have previously designed various VMS boards using low-power RGB matrices that are not only compact but also provide excellent legibility in diverse lighting conditions, just like you require. Moreover, my expertise in the use of CAN bus and low power design will be an asset in ensuring your device is efficient and optimized for vehicle use. In addition to technical proficiency, I bring a unique creative perspective to the table. My experience with 3D animation allows me to fully grasp the distinct demands of your project's graphical needs. This will be invaluable when incorporating the animated text and directional graphics you desire within your specified form factor.
$45 USD in 1 day
5.5
5.5

Hi, I can develop a compact vehicle-mounted LED VMS, including electronics, PCB design, firmware, animated text and arrows, and a simple control interface. I’ll focus on daylight readability, selectable colours, vehicle power protection, and keeping the complete assembly within the specified dimensions. I’ll also provide mechanical drawings, build instructions, and a demo simulation to verify the design.
$100 USD in 1 day
5.1
5.1

As a team focused on building real, practical solutions with a wide range of technical skills at our disposal, we are uniquely equipped to deliver on all aspects of your Vehicle LED VMS project. We have significant experience with circuit design, electronics, embedded systems, firmware development, and PCB design—all invaluable assets for this endeavor! Our expertise will ensure that the LED matrix fits within your 100 x 30 x 30 form factor without sacrificing functionality or brightness. Moreover, the agentic AI and IoT work we've done in the past puts us on the cutting edge of low-power RGB matrices—precisely what your project requires. No dimension will be left unaccounted for once we've finished developing the mechanical drawings and putting together the assembly. Finally, what truly sets us apart is not just our technical skills but our penchant for delivering on complex projects that exist at boundary lines. This project demands AI that communicates with hardware—a line we are known to blur efficiently. We understand that you don't just need prototypes but production infrastructure; it's not just about creating flashy gadgets but practical tools—precisely what we excel at. Presently, we're drawn by your project's challenge and excited to discuss how AI can fit perfectly into this ambitious endeavor! Let's collaborate towards an impressive, high-efficiency VMS display system!
$140 USD in 7 days
5.1
5.1

Okay, I got what you want exactly. I am an Embedded Engineer with 10 years of experience, providing LED matrix design, embedded firmware, RGB control, PCB development, and wireless interfaces. In my opinion, I would develop a compact vehicle-mounted VMS with programmable messages, smooth arrow animations, and selectable colours while keeping the complete assembly within your 100 × 30 × 30 mm limit. I would carefully balance LED density, daylight visibility, power consumption, thermal management, and viewing angle to maintain readability in a compact enclosure. This project is very similar to my previous works. I have experience with embedded systems, microcontroller programming, power electronics, and custom PCB design. I would integrate the LED drivers, controller, brightness adjustment, and a simple interface with one-touch presets and editable messages. The key challenge is achieving readable text and smooth animations within such a small form factor. I would evaluate suitable RGB LEDs, optimize the matrix layout, and develop firmware for all five messages and the left, right, and expanding dual-arrow animations. Two important questions: Is the 100 × 30 × 30 mm limit for the entire assembled unit, including the housing? Do you prefer Wi-Fi/Bluetooth control or a dedicated handheld keypad? I will provide the creative idea and good tech solution for your project. Best regards. Maksym
$140 USD in 7 days
5.0
5.0

Hi, Fernando here, from Mexico. What matters most in designing your vehicle LED VMS display with 30 form factor is a board that works on the first order and can be built at scale. I'm a senior embedded and electronics engineer with 12+ years of experience working with Electronics, Embedded Systems and PCB Layout. For your vehicle LED VMS display, the real challenge is part availability and manufacturability. A common issue: no DFM check before ordering, so boards come back with assembly or clearance problems. My plan: first, review the schematic, parts and enclosure limits. Then, update the layout with DFM, power paths and grounding in mind. Finally, run DRC and a DFM check, then prepare Gerbers and the BOM. I'd start with the core layout changes as phase one. I've done PCB work before. A few questions to better understand the scope: 1. Is the enclosure final? Mounting holes and connectors follow it, late changes mean a new layout. 2. Stick to parts your assembler stocks? I'd recommend it, faster assembly and fewer substitutions. 3. Will end users open or service the device? Then I keep connectors and fuses reachable and clearly labeled. I can start right away. I'm on CET, so our working hours overlap. Happy to go over the details here in chat and suggest the best approach. Looking forward to hearing from you, Fernando
$97 USD in 1 day
4.7
4.7

Hi, Greetings I am interested to work on your project. Kindly discuss technical design details and required parameters. Looking forward to hear from you. Thank you Shivkant
$140 USD in 7 days
4.5
4.5

Hi, good day! I would like to apply for this project. I can help develop a compact vehicle-mounted LED VMS solution, including the LED matrix electronics, PCB design, firmware for animated text and directional arrows, and a simple control interface with one-touch presets. I’ll focus on keeping the assembly within the 100 × 30 × 30 cm envelope while ensuring clear messaging, selectable colours, and adjustable brightness. I look forward to discussing the technical requirements and delivering a complete, well-documented working package. Thank you.
$30 USD in 2 days
4.7
4.7

=====$ Hi, Aleksandar here from Serbia $===== A compact vehicle VMS only works if bright, readable animations fit within the strict enclosure without overheating, excessive power draw, or sacrificing visibility in daylight. I noticed you mentioned the 100 × 30 × 30 form factor, which makes LED spacing and thermal management critical, so I'd validate the matrix layout and power budget before finalizing the PCB. I would develop a coordinated controller, firmware, and preset interface for the German warning messages, selectable colours, animated arrows, and adjustable brightness. I've built similar systems. Will the display use a 12V or 24V vehicle supply, and is the 100 × 30 × 30 limit in centimetres or millimetres? Let's connect over a chat so we can discuss this in more detail.
$180 USD in 3 days
4.6
4.6

Hi, I’ve read the requirements carefully, and I can help design the controller PCB for your compact vehicle-mounted LED VMS. I can work on the LED matrix drivers, controller hardware, firmware for animated text and directional arrows, and a simple interface for selecting messages, colours, and brightness. I’ll also consider the tight enclosure dimensions and provide the PCB files, source code, and mechanical documentation. Please check my portfolio for similar embedded PCB projects. I am ready to start immediately. Best regards, Ahmed
$140 USD in 7 days
4.6
4.6

Dear Client, I can help you develop the complete vehicle-mounted VMS system, including the LED matrix electronics, controller PCB, firmware, and the interface used to trigger messages and animations. I’ve worked on RGB/RGBW LED control hardware, ESP32-based controllers, power electronics, and compact PCB designs, so the main challenges here are familiar: daylight brightness, thermal load, vehicle power transients, smooth animation, and keeping the complete assembly inside the mechanical envelope. For this project I would first define the LED pitch, viewing distance, matrix size, brightness target, and power budget. From there I can design the controller/driver PCB, message and arrow animation logic, brightness control for day/night use, and a simple preset-based control interface. I would also make sure the PCB and enclosure interfaces are designed around serviceability and vehicle vibration rather than treating the display as a bench-only prototype. Profiles: https://www.freelancer.in/u/electronicsdone One question: does the VMS need to operate from a 12 V vehicle electrical system only, or should it support both 12 V and 24 V vehicles? Send me that and I can suggest the display architecture I would use. Kind Regards Prat PCB Must Innovations
$140 USD in 2 days
6.5
6.5

Dölsach, Austria
Payment method verified
Member since Apr 21, 2016
$15-25 USD / hour
$250-750 USD
€2-6 EUR / hour
$250-750 USD
$10-30 USD
$30-250 USD
$30-250 USD
₹600-1500 INR
₹1500-12500 INR
$750-1500 USD
$30-250 NZD
₹750-1250 INR / hour
$10-40 USD
₹600-1500 INR
$300-400 USD
₹100-400 INR / hour
$3000-5000 USD
₹600-1500 INR
$250-750 USD
₹600-1500 INR
₹600-1500 INR
$30-250 NZD
$30-250 USD
₹12500-37500 INR
£20-250 GBP