ESP32 Drone Controller PCB -- 2

@amelectronics

Hi, I can help convert your completed ESP32 flight controller schematic into a production-ready PCB. I have experience with compact embedded PCB layouts, ESP32-based designs, power routing, sensor integration, and manufacturing-ready hardware development. I will optimize the board layout for signal integrity, power distribution, EMI reduction, and manufacturability while keeping the design suitable for a compact drone application. I will provide the complete PCB source files, Gerbers, drill files, pick-and-place files, STEP/3D model, BOM, and ensure the design passes DRC/DFM checks before delivery. I can start immediately after reviewing the schematic and design constraints, and I'll keep you updated throughout the layout process.

@mairajali11

As an experienced Electrical/Electronics Engineer and Professional PCB Designer, I'm confident that I'm the ideal fit for your drone controller project. Having successfully designed several high-quality circuit boards using various tools like Eagle, Altium, KiCAD, and EasyEDA over the past 8 years, I understand the intricate demands of your project. My proficiency extends to CAD/Housing Design for PCBs in Fusion360 too. Moreover, my skills in MATLAB/SIMULINK & Python programming, VHDL/Verilog HDL, Xilinx, and FPGA development will further add value to the project and facilitate efficient implementation of high-current motor traces and noise-sensitive sensors that are crucial for drones. Over the years, I've honed my expertise not just in designing and prototyping but also in thorough DRC/DFM checks and generating precise fabrication data. My commitment to delivering high-quality outputs on time and within budget is evident from being ranked among the top 1% of skilled professionals by Preferred Freelancer. I'm ready to dive into your project full-time and bring your schematic to life with utmost accuracy and precision. Feel free to consult my portfolio to get a better glimpse of my capability. Looking forward to turning your ideas into a 100% functional reality!

@tshibsamuel477

Hi there, I read your offer carefully and understand that you need a production-ready PCB layout for an existing ESP32-based drone flight-controller schematic. I can handle the complete board layout, layer-stack selection, high-current routing, sensor-noise mitigation, grounding, DRC/DFM checks, and manufacturing outputs. I have experience with Altium Designer, compact mixed-signal PCBs, power distribution, communication interfaces, and production-ready documentation. I can deliver the native design files, Gerbers, drill files, BOM, pick-and-place files, STEP model, and clear layout notes for future revisions. Just send me a message and we can discuss the design details. Best regards, Samuel Tshibangu

@Amidst

Hey there! I’m Alok, A PCB, Circuit and Mechanical designer with a passion for turning ideas into rock-solid, high-performance circuit boards. even expert on Python, C, C++ With nearly a decade of experience, I’ve tackled everything from compact consumer gadgets to complex industrial systems—always with a focus on precision, efficiency, and reliability. # Schematic & Layout Design – Clean, optimized, and manufacturable. # Component Selection & Library Management – No surprises, just the right parts for the job. # Reverse Engineering – PCB cloning, replication, and improvements. # Gerber, BOM & CPL Generation – Ready for seamless production. # DFM & DFA Expertise – Because great design means smooth manufacturing. # Multi-Layer, Flex, & High-Density PCB Design – Whatever the project needs. If you need a PCB and Code that’s efficient, reliable, and built for real-world performance, let’s chat. I’d love to help bring your project to life!

@abdurRafiqM

HI, I am an experienced electronics and PCB Design engineer, specialised in use of ECAD software such as Altium Designer, KICAD, EasyEDA, etc. for the the design of electronics and PCB. I will design your projects to meet your Requirements and the industry standard. I do all kinds of circuits such as Power delivery circuit, Sensor Integrated Circuits, wireless control, MCUs etc. I will deliver the following. The Schematics for your Design The PCB for the design Bill of materials(If needed) Gerber, Pick and Place and other manufacturing and assembly drawings needed. Full Support and consultancy till the project is done. Kindly send me message for my previous designs and also so we can discuss further on your project I look Forward to working with you. Best Regards, Abdur-Rafiq

@sakshis576

As an experienced PCB designer, I'm excited about the opportunity to take your drone flight controller schematic and transform it into a production-ready board. Leveraging tools like Altium and KiCad, I can help you with all aspects of board layout – from choosing efficient layer stacks to ensuring low weight and minimal interference while remaining manufacturable. I'm well-versed in generating fabrication data like Gerbers, drill files, pick-and-place, STEP/3D, and BOMs, which would be crucial for your project. Moreover, one of my key strengths is running thorough DRC/DFM checks to ensure the design sails through the board house review on the first pass. I understand how important it is for your project to be highly reliable and efficient, especially given the drone's tight form factor and its mix of high-current motor traces and noise-sensitive sensors.

@ahmedy607

Hi, I can help with this project. I have experience with PCB layout for ESP32-based embedded systems, power electronics, and sensor-intensive designs. Based on your completed schematic, I can create a production-ready PCB layout, perform DRC/DFM checks, and deliver all manufacturing files including Gerbers, BOM, Pick & Place, STEP model, and source files. Please check my portfolio for similar PCB projects. I'm ready to start immediately. Best regards, Ahmed

@alluankit01

Hi, I can convert your completed ESP32 drone-controller schematic into a compact, production-ready PCB layout with careful attention to weight, motor-current paths, sensor noise, EMI, thermal performance, and manufacturability. The best solution is to first review the schematic, netlist, footprints, mechanical limits, connector positions, current requirements, and sensor interfaces. I’ll then select the appropriate layer stack, separate noisy power sections from sensitive IMU/sensor circuits, optimize grounding and decoupling, and route high-current and high-speed signals correctly. I’m comfortable with ESP32 hardware, drone flight-controller layouts, Altium Designer/KiCad, multilayer stack-ups, high-current routing, sensor isolation, EMI reduction, power integrity, compact PCB placement, DRC, DFM, and manufacturing documentation. Deliverables will include: * Complete PCB placement and routing * Optimized layer-stack recommendation * High-current motor/power routing * Noise-sensitive sensor layout * Gerber and drill files * Pick-and-place files * STEP/3D board model * Verified BOM * Editable source files * DRC and DFM checks * Design-decision and trade-off notes I’ll focus on a compact, reliable, and manufacturable board that is easy to revise for future drone versions. Best regards Ankit

@anjalin0309

Hi, I'd be happy to help convert your ESP32 drone flight controller schematic into a production-ready PCB. I'm a Hardware Design Engineer with experience in KiCad and Altium, specializing in compact embedded and mixed-signal PCB layouts. I can optimize the board stack-up, component placement, and routing to minimize EMI while maintaining good power integrity and manufacturability. I have experience designing boards with high-current power paths, sensor interfaces, communication modules, and compact layouts, making me well-suited for drone and robotics applications. Recently, I designed a compact ESP32 based smartwatch PCB with BLE, battery management, and sensor integration and STM32 evaluation boards featuring USB, SD card, and multiple communication interfaces. These projects required careful signal routing, power distribution, and space optimization. I'll provide complete manufacturing deliverables, including source files, Gerbers, drill files, pick-and-place, STEP/3D model, assembly files, a BOM with manufacturer part numbers, and documentation of key design decisions. The design will undergo thorough DRC and DFM checks before delivery to ensure a smooth fabrication process. Estimated turnaround for the PCB layout and manufacturing package is 3–5 days, depending on board complexity. I look forward to working with you on your flight controller.

@chetanb382

Hi, We reviewed your requirements and this project is an excellent match for our experience in ESP32-based embedded hardware and production-ready PCB design. We have designed compact control boards with careful attention to signal integrity, power distribution, EMI reduction, and manufacturability. We can transform your completed schematic into a clean, optimized PCB layout by selecting an appropriate layer stack, optimizing high-current motor traces, separating noisy power paths from sensitive sensor signals, and performing thorough DRC/DFM verification. We'll deliver complete manufacturing files including Gerbers, drill files, Pick & Place, STEP model, BOM, source files, and design notes for future revisions. Please visit our profile and portfolio to review our previous PCB and embedded hardware projects. Timeline:3-5 Days (might be decreased based on scope) Budget:₹2600(We can discuss the budget further after reviewing the schematic and PCB complexity.)* A few questions: 1. Are there any board size or mounting constraints for the drone frame? 2. Do you already have preferred PCB stack-up or manufacturer design rules? 3. Is this a 2-layer or 4-layer board? We are available to start immediately and will provide regular progress updates. Regards, M&C Eng

@thanhphuong14

Yeah, I hope you'll choose me. I have designed a drone flight controller PCB for one of my own projects. The board is based on an STM32F4 microcontroller, which handles all flight control and real-time processing. I integrated an IMU (gyroscope and accelerometer) for attitude estimation, along with a GPS module for positioning and navigation. During the PCB layout process, I paid close attention to separating noisy power circuits from sensitive sensor signals, optimizing the ground plane, minimizing EMI, and routing high-current traces to ensure stable and reliable performance. I also followed good PCB design practices, including placing decoupling capacitors close to IC power pins, using differential pair routing where required, considering controlled impedance for high-speed signals, and performing comprehensive DRC/ERC checks before manufacturing. I have experience delivering complete manufacturing packages, including Gerber files, drill files, Pick-and-Place files, BOM, STEP 3D models, and KiCad source files. I always design with manufacturability in mind, ensuring the boards can be assembled and tested with minimal issues. I'm confident I can transform your completed schematic into a clean, reliable, and production-ready PCB. I can also document the design decisions and support future revisions or feature upgrades if needed.

@anjalio22

Hello, I’d love the opportunity to work on your ESP32-based drone flight controller PCB. I have experience in PCB layout, embedded hardware, and production-ready design using Altium Designer and KiCad. Based on your completed schematic, I can create an optimized PCB layout with careful attention to high-current motor traces, power integrity, grounding, EMI reduction, and noise-sensitive sensor routing while keeping the board compact and manufacturable. My deliverables will include: * Optimized PCB layout with an appropriate layer stack * Complete source files (Altium/KiCad) * Gerbers, NC drill files, pick-and-place files, fabrication drawings, and STEP/3D model * Clean, component-matched BOM * Thorough DRC/DFM verification to minimize manufacturing issues * Documentation of key design decisions and trade-offs for future revisions I understand the importance of reliable flight-controller hardware, and I will ensure the design is production-ready and meets industry best practices. Throughout the project, I'll maintain clear communication and provide progress updates to ensure the final board matches your requirements. Give me one opportunity to handle your project. I assure you that I will complete the work with full dedication, accuracy, and professionalism. I am confident that my skills and experience will meet your expectations and deliver high-quality results on time. I look forward to discussing your project and getting started.

@JANGIRj18

As an electrical engineer specializing in embedded systems, I am the ideal fit to turn your ESP32 schematic into a reliable, high-performance flight controller. Here is what I bring to your project: * Noise & RF Isolation: Expert placement to keep ESP32 signals and power noise away from sensitive IMU sensors. * High-Current Routing: Thick, optimized copper paths designed to handle heavy motor currents safely. * DFM Expertise: Strict Design for Manufacturability checks for a first-pass success at the board house. * Complete Deliverables: Clean source files (Altium/KiCad), precise 3D STEP models, and production-ready Gerbers/BOM. I can deliver your initial layout for review within 3 to 5 days. Let’s get your drone

@nagarajbhat016

Hi, I read your requirements — full board layout from your completed schematic, DFM/DRC-clean fabrication data, and documentation for future iteration. I can take this on confidently, especially given the drone/flight-controller context. I'm a Robotics Engineer with hands-on PCB design experience in both KiCad and Altium, and I've personally routed a drone flight-controller-class board as part of my UAV work — including component placement, layer stack decisions, and trade-offs for tight drone form factors. I contributed to All India Rank 1 at SAEINDIA's Aerothon 2025, integrating a full autonomous UAV system, so I understand how a board needs to perform once it's carrying real sensors and power distribution in a weight-constrained airframe. One honest note: my experience with high-current motor trace design is limited — I'll apply careful trace-width/current calculations and flag any key decisions for your review rather than guess silently. What I'll deliver: Full layout with efficient, EMI-aware layer stack Complete fab package: Gerbers, drill files, pick-and-place, STEP/3D, matched BOM Clean DRC/DFM verification Design documentation for future iteration Native source files (KiCad/Altium) I can share examples of my flight-controller/robotics board work. First-pass layout within 7 days, confirmed once I see full complexity. Best, Nagaraj Bhat

@kethavathk2

Hello, I am interested in working on your ESP32-based Drone Flight Controller PCB design project. I have 1.5 years of experience in Embedded Systems and PCB Design, with hands-on experience using KiCad for schematic capture, PCB layout, routing, hardware debugging, and manufacturing file generation. I have worked on ESP32, IoT, GSM, Arduino, and sensor-based hardware projects, following industry-standard PCB design practices. For your project, I can: Convert your schematic into a clean, production-ready PCB layout. Optimize component placement, grounding, and routing for signal integrity and EMI reduction. Design reliable high-current motor traces and power distribution. Perform complete DRC and manufacturability checks. Deliver Gerber files, NC Drill files, BOM, Pick-and-Place files, STEP/3D model, and editable source files. Document design decisions for future revisions and scalability. Although I am new to Freelancer, I am dedicated to delivering high-quality work, maintaining clear communication, and providing revisions until you are satisfied. Bid Amount: ₹3,800 INR Estimated Delivery: 7 Days I would be happy to review your schematic, netlist, footprints, and datasheets before starting. I look forward to working with you and delivering a reliable PCB design. Best Regards, Kethavath Kalyani Embedded Systems & PCB Design Engineer

@hiteshpadshala

I am Embedded Hardware Engineer having more than one year experience in PCB design.i have worked on Automation and IOT based project. I have expertise in pcb designing using kicad and EasyEDA tools. I can complete your project within defined timeline.

@raghavg42

Hello, This project is a strong match for my background in drone electronics and embedded hardware design. I am the Head of Embedded Systems at my university's AUV team and have designed flight-control, navigation, power distribution, and sensor boards for robotics applications. I can take your completed schematic and develop a production-ready PCB with careful attention to high-current paths, sensor noise isolation, grounding strategy, power integrity, and manufacturability. Having worked on compact robotics systems, I understand the challenges of routing motor-current traces alongside sensitive IMU and communication circuitry. I will deliver a fully verified layout, fabrication files, BOM, STEP model, pick-and-place files, and source design files. Every design undergoes thorough DRC and manufacturability checks before release. I can start immediately and move quickly from layout to final production files while keeping you updated throughout the process. Best regards, Raghav Gosain

@Habib821

Hi, I can take your completed ESP32 flight controller schematic and turn it into a production-ready PCB. I'll optimize the layer stack, route high-current motor paths and sensitive sensor signals carefully, perform full DRC/DFM checks, and deliver the source files, Gerbers, drill files, pick-and-place, STEP model, and a clean BOM. I have experience with embedded hardware, PCB layout, and mixed-signal designs, with a strong focus on power integrity, EMI reduction, and compact board layouts. A quick question: approximately how many layers are you expecting (2, 4, or more), and do you already have a target board size or mounting-hole constraints?

@vishnu0c0r

Hello, Your project is a good match for my background because I work across the complete embedded product development cycle rather than PCB layout alone. Recently I've been designing and iterating a compact 4-layer embedded PCB for a commercial GPS tracking product (currently on its fifth hardware revision), alongside developing the firmware and supporting hardware bring-up and validation. I also work professionally on commercial embedded products where my responsibilities include firmware development, schematic modifications, hardware validation, and engineering changes. For your flight controller, I can: • Create a clean, manufacturable PCB layout from your completed schematic. • Optimize placement and routing with consideration for power, signal integrity, and compact form factor. • Generate complete manufacturing outputs (Gerbers, drill files, BOM, pick-and-place, STEP). • Perform DRC/DFM checks before release. • Document design decisions for future revisions. Although I haven't designed a dedicated drone flight controller before, I have experience building compact embedded hardware where board size, wireless integration, and manufacturability are important, and I'm comfortable reviewing your schematic and discussing the best layout approach before starting. If you'd like, I'd be happy to review the schematic first and identify any potential layout considerations before we begin. Looking forward to hearing from you. Vishnu