
Closed
Posted
Paid on delivery
Embedded IoT Developer Needed: ESP32 + ToF Sensor Firmware & WhatsApp Integration (Benchtop Prototype) Project Overview: We are looking for an experienced Embedded Systems / IoT Engineer to build and test a functional benchtop circuit prototype for an app-less, non-invasive smart fuel monitoring accessory for two-wheelers. Scope of Work: Assemble and wire a benchtop circuit using an ESP32-C3 controller, a Time-of-Flight (ToF) distance sensor, a 3.7V LiPo battery, and a TP4056 / USB-C battery management module. Write and optimize firmware to calculate liquid distance/level and apply moving-average filtering to suppress sloshing noise. Implement Web Bluetooth / BLE handshake logic to transmit sensor telemetry without a custom mobile app. Configure cloud API triggers / webhooks to send automated low-fuel notifications via the WhatsApp Cloud API. Deliver fully commented source code, a basic schematic, and send 1–2 physically tested, working benchtop hardware units to Punjab, India. Technologies & Hardware Stack Used: Microcontroller: ESP32-C3 (RISC-V architecture) Sensor: Time-of-Flight (ToF) Laser Distance Sensor (VL53L0X / VL53L1X) Power Management: 3.7V LiPo Battery + TP4056 / USB Charging Circuit Protocols & Communication: I2C (Sensor communication), BLE / Web Bluetooth, REST APIs / Webhooks Cloud & Messaging: WhatsApp Cloud API (Utility Message Trigger) Development Environments: ESP-IDF / Arduino IDE (C/C++)
Project ID: 40795941
71 proposals
Remote project
Active 1 day ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
71 freelancers are bidding on average $152 CAD for this job

Hi I am an embedded systems engineer with over 16 years of experience. I have extensive experience developing battery-powered sensing devices, connecting embedded firmware to cloud services, and taking products from initial concept through production. I can assemble and physically test your ESP32-C3 prototype, implement filtered fuel-level readings, and connect Web Bluetooth telemetry to WhatsApp low-fuel notifications. I will provide fully commented source code, a basic schematic, and 1–2 tested benchtop units shipped to Punjab. Two details will help define a workable design: will the ToF sensor have a clear optical path to the fuel surface, and should notifications continue when no phone is connected? These determine the sensor mounting and the route from BLE to the cloud. My CAD 350 bid is above your listed range to account for hardware, assembly, physical testing and shipping. I am flexible once we confirm the unit count and component and courier costs. I can also support further firmware refinement and product development after the prototype. Please contact me to discuss details.
$350 CAD in 14 days
7.7
7.7

Hi, I have experience in designing Circuits and can complete your project. I have expertise in the following: 1- Designing schematic and PCBA 2- Ordering the PCBA and getting boards manufactured. 3- Writing firmware for the PCBA to make sure everything works as expected. 4- I can also develop smartphone apps to communicate and control the hardware. If you wish we can discuss in chat. Thank you.
$140 CAD in 7 days
7.5
7.5

Hi, This project requires precise embedded firmware development for ESP32-C3 and integration with a ToF sensor to measure liquid levels accurately. The main engineering challenge is ensuring reliable sensor data filtering to suppress sloshing noise while maintaining responsive BLE telemetry and seamless WhatsApp API integration. I usually structure firmware to separate sensor data acquisition, filtering, and communication layers to isolate concerns and optimize performance. Although my background is focused on backend and AI systems, I understand the criticality of robust BLE handshake logic and cloud webhook triggers in IoT architectures. I would first validate the sensor calibration and filtering algorithms on the benchtop prototype to ensure consistent liquid level readings. I typically design the BLE data flow to minimize power consumption while maintaining real-time telemetry. Systems like this must be designed for maintainability and extendability, especially for future app-less deployments. I can help review your firmware architecture and telemetry integration to ensure reliability and clarity in your source code. Thanks, Hercules
$140 CAD in 7 days
6.8
6.8

Hi there, I am excited to offer my expertise for your ESP32 Fuel Monitor Prototype project. With a solid background in Embedded Systems and IoT development, I have successfully delivered similar projects integrating sensors and wireless communication protocols. Your project's innovative approach to non-invasive fuel monitoring aligns perfectly with my skill set, especially with the use of the ESP32-C3 and ToF sensors. For this project, I will assemble a reliable benchtop circuit, ensuring seamless integration between the ESP32-C3 and the VL53L0X/VL53L1X ToF sensors. I will develop optimized firmware to accurately measure liquid levels, employing moving-average filtering to mitigate any sloshing noise. My experience with BLE ensures efficient transmission of data without needing a dedicated mobile app, while my knowledge of cloud APIs will facilitate seamless WhatsApp notifications for low-fuel alerts. I will provide well-documented source code and schematics, and ensure the prototype is thoroughly tested before dispatching it to Punjab. Using development environments like ESP-IDF and Arduino IDE, I will ensure the solution is robust and scalable. Looking forward to collaborating on this unique opportunity to innovate in the IoT space. Best Regards,
$30 CAD in 5 days
6.5
6.5

Hi, I understand you’re building a benchtop ESP32-C3-based fuel monitor with a ToF sensor, BLE telemetry, and WhatsApp alerts. This kind of prototyping, firmware for sensor reading, simple filtering, and webhook-driven notifications, is the kind of work I’ve done in early hardware iterations. I’ve wired similar sensor chains and lightweight BLE/webhook flows for quick prototypes. I’d start by validating the current flow on a bench rig, isolate unstable readings, then implement a moving-average filter, and a minimal BLE handshake. Next, I’d wire a REST webhook path to the WhatsApp Cloud API and verify end-to-end delivery against a test endpoint. A key risk is drift in the sensor distance readings under tilt or battery drop, which can affect alert thresholds. What should happen if the ToF readings drift during vibration tests? Who owns the bench data and how should firmware versions be tracked across prototypes? If we're aligned, I can outline the implementation phases before kickoff. Best regards, Brandon
$100 CAD in 1 day
6.1
6.1

Hello, My experience integrating REST APIs, third-party services, and automation makes me well suited to connect your ESP32 fuel-monitoring prototype with cloud notifications and WhatsApp workflows. I build maintainable software solutions across Python, PHP, Node.js, Flutter, and web platforms, with a strong focus on reliable API communication and practical user experiences. For your project, I can contribute to the BLE/Web Bluetooth telemetry experience, webhook logic, and WhatsApp Cloud API integration while keeping the resulting code clear and maintainable. My mobile app development background is also relevant to validating how sensor data is exposed to phone-based users without requiring a custom app. I can provide organized source code and supporting documentation for the software components. I would be glad to bring my embedded-IoT integration and automation skills to this prototype and help turn the sensor data into a usable low-fuel notification experience. Thanks!
$80 CAD in 1 day
6.1
6.1

With over 15 years of experience designing embedded systems and IoT electronics, I can develop your ESP32-C3 fuel-monitoring prototype around the ToF sensor, LiPo power circuit, and BLE telemetry requirements. My background includes ESP32 firmware, C/C++ programming, I2C communication, and electronics development for automotive and consumer applications—strongly aligned with this benchtop device. I can contribute the sensor-level measurement firmware, moving-average filtering for sloshing suppression, BLE/Web Bluetooth communication, and REST API/webhook integration for automated WhatsApp notifications. My experience with Arduino, embedded systems, PCB design, and communication protocols including I2C, SPI, UART, and CAN also supports producing a clear schematic and well-commented source code suitable for further development. I am ready to build and test a practical prototype that combines reliable electronics with focused firmware, and I would be pleased to take responsibility for bringing this fuel-monitoring concept to a working benchtop unit.
$140 CAD in 7 days
5.8
5.8

Hello, I HAVE STRONG EXPERTISE IN EMBEDDED IOT DEVELOPMENT, ESP32 FIRMWARE, SENSOR INTEGRATION, BLE COMMUNICATION, AND CLOUD API AUTOMATION. I understand you need a working ESP32-C3 fuel-monitoring prototype that measures fuel level without invasive installation and sends low-fuel alerts through WhatsApp. I can develop the firmware to read the VL53L0X/VL53L1X ToF sensor over I2C, apply moving-average filtering to reduce sloshing noise, and transmit telemetry through BLE/Web Bluetooth. I can also integrate cloud webhooks with the WhatsApp Cloud API for automated alerts. Before proceeding, I’d like to confirm the sensor’s measurement arrangement and the expected fuel-container geometry so the readings can be calibrated reliably. Thanks, Invoke Tech
$275 CAD in 8 days
5.7
5.7

My ESP32 firmware and embedded hardware experience directly matches your fuel-monitor prototype, including sensor integration, wireless communication, and benchtop product development. I can work with the ESP32-C3, VL53L0X/VL53L1X ToF sensors, I2C, LiPo charging circuits, and C/C++ firmware required for this accessory. My background includes embedded systems using ESP32, Arduino, STM32 and Nordic platforms, along with BLE, Wi-Fi, HTTP/HTTPS, MQTT, RTOS, driver development, and sensor-based IoT systems. I can deliver firmware for liquid-level calculation with moving-average filtering, BLE/Web Bluetooth telemetry, and REST API/webhook integration for WhatsApp Cloud notifications. My PCB and circuit-design expertise also supports the benchtop wiring, schematic, component selection, documentation, and hardware testing requirements. I am ready to develop and validate the working prototype units and provide clear, commented source code and engineering documentation. Choose me to turn this fuel-monitoring concept into a functional ESP32-based prototype.
$140 CAD in 7 days
5.5
5.5

Hello Sir, I can develop the ESP32 fuel monitor prototype with precision and expertise. I will assemble the benchtop circuit using the specified components, write optimized firmware for distance measurement, and implement the BLE handshake for telemetry. Additionally, I'll configure the WhatsApp Cloud API for low-fuel notifications. You can expect fully commented source code and working units delivered to your location. Are there any specific requirements for the schematic? Thanks, Deepak
$140 CAD in 4 days
5.2
5.2

Hello, I can develop and validate your ESP32-C3 benchtop fuel-monitoring prototype, covering the complete path from sensor readings to low-fuel alerts. I’ll assemble the ESP32-C3, VL53L0X/VL53L1X, LiPo, and TP4056 circuit; implement reliable I2C acquisition, liquid-level conversion, calibration, and moving-average/sloshing suppression; and provide clean, commented firmware in ESP-IDF or Arduino C/C++. I’ll also implement the BLE/Web Bluetooth telemetry handshake, define a practical REST/webhook payload, and connect the cloud trigger to the WhatsApp Cloud API utility-message flow. Testing will include repeatable distance/level measurements, battery and charging checks, BLE transmission validation, and simulated low-fuel events. Deliverables will include source code, a basic schematic, setup instructions, and physically tested benchtop units prepared for shipment to Punjab, India. A key design focus will be making calibration adaptable to different tank geometries while keeping the prototype non-invasive and app-less. What fuel-tank geometry and WhatsApp Cloud API setup should the prototype support first for calibration and alert testing? Regards, Talha
$30 CAD in 14 days
5.3
5.3

Custom IoT hardware and ESP32/STM32 firmware are central to my work, making this benchtop fuel-monitoring prototype a strong match for my embedded systems background. I can develop the Arduino-based firmware for ESP32-C3, interface the VL53L0X/VL53L1X ToF sensor over I2C, and implement liquid-level calculation with moving-average filtering to reduce sloshing noise. My experience spans electronics, firmware development, and MQTT-connected sensor networks, along with REST API integration. That combination fits the full scope from sensor telemetry and BLE/Web Bluetooth communication through webhook-based WhatsApp Cloud API notifications. I can also provide clearly commented source code and a basic schematic for the tested prototype units. I’m ready to build this into a practical, working hardware prototype and would be glad to take responsibility for the firmware and IoT integration end to end.
$140 CAD in 7 days
5.2
5.2

My electronics skill set is directly relevant to developing a benchtop ESP32 fuel-monitoring prototype, including the sensor, controller, power module, and wiring integration described in your project. I can apply my engineering background to create a practical prototype arrangement and supporting documentation, with attention to the physical layout, circuit connections, and reliable operation of the assembled unit. My broader experience with technical design, AutoCAD, 3D modeling, and engineering tools can also support a clear basic schematic and organized hardware presentation. Electronics is listed among my core skills, making this project a strong match for my technical profile. I would be pleased to build and document the prototype for your fuel-monitoring accessory and contribute to a functional benchtop solution.
$120 CAD in 2 days
5.0
5.0

Hi, Greetings! I am interested in working on your project. Could you please share the design details and technical requirements so we can discuss the project scope and key parameters in detail? I look forward to working with you. Thank you! Shivkant
$140 CAD in 7 days
4.6
4.6

My experience building APIs, PWAs, and Facebook API integrations since 2015 is highly relevant to the telemetry and WhatsApp notification side of your ESP32 fuel-monitor prototype. I can develop the REST API/webhook layer needed to receive sensor data, apply low-fuel notification logic, and connect the system with the WhatsApp Cloud API using authenticated access. My background includes Node.js, Python, PHP, SQL, JavaScript, JSON, and cloud hosting on AWS, Google Cloud, VPS, and DigitalOcean, allowing me to support the backend and deployment requirements around the device. While my profile is primarily software-focused rather than embedded-hardware-focused, I can contribute strongly to the BLE/Web Bluetooth integration, API communication, authentication, and web-based monitoring components. I am ready to apply my software and API experience to this prototype and collaborate on delivering a reliable connected fuel-monitoring system.
$150 CAD in 3 days
4.8
4.8

Hi there, I noticed you require an ESP32-C3 controller combined with a Time-of-Flight sensor for a non-invasive fuel monitoring accessory. I can help you assemble and wire the benchtop circuit while writing optimized firmware to accurately calculate liquid levels, applying moving-average filtering to minimize noise. My experience in firmware development with I2C and BLE will ensure effective transmission of telemetry without the need for an app. I will also set up the necessary cloud API triggers for sending low-fuel notifications via the WhatsApp Cloud API. Rest assured, I will provide thoroughly documented source code along with a basic schematic, and I'll ensure delivery of one or two working prototypes to Punjab, India, as specified in your project scope. Regards, Ali
$130 CAD in 1 day
4.3
4.3

Hello, The main challenge is turning the ESP32-C3, ToF sensor, battery circuit, BLE telemetry, and WhatsApp alert flow into a dependable benchtop fuel-monitoring prototype. I can structure the work around accurate level readings, sloshing-resistant filtering, safe power handling, and clearly testable communication paths. I would implement the firmware in ESP-IDF or Arduino C/C++, using I2C for the VL53L0X or VL53L1X, moving-average filtering, BLE or Web Bluetooth-compatible telemetry, and REST webhook integration for WhatsApp Cloud API notifications. The deliverables will include commented source code, a basic schematic, and practical validation of the assembled circuit. Similar work includes IoT sensor systems, ESP32 firmware, API integrations, and automation workflows requiring reliable telemetry and event-based notifications. I can also document calibration assumptions and the limitations of benchtop testing before physical units are prepared for shipment. I will deliver the first functional prototype milestone, test results, source code, and schematic within 7 days, with maintainable implementation and focused documentation. Any provided files can be reviewed and aligned with the existing requirements or codebase. Best regards, Bohdan
$250 CAD in 7 days
3.9
3.9

Hi, I can help you develop and test your ESP32-C3-based smart fuel monitoring prototype, including VL53L0X/VL53L1X sensor integration, accurate liquid-level measurement with moving-average filtering, BLE/Web Bluetooth communication, and automated low-fuel alerts through the WhatsApp Cloud API. I can handle circuit assembly, firmware development in C/C++ using ESP-IDF or Arduino, power management integration, hardware testing, and provide well-documented source code and schematics. I’m ready to discuss the technical requirements, prototype delivery, and timeline to ensure a reliable working solution.
$95 CAD in 5 days
3.9
3.9

Our cloud, API, and mobile development expertise is a strong match for the telemetry and WhatsApp notification side of your ESP32 fuel-monitor prototype. Nanoq LLC builds production-ready APIs and cloud systems using Node.js, Python, FastAPI, Firebase, AWS, and Google Cloud, providing the backend foundation needed for REST webhook integration and automated WhatsApp Cloud API alerts. I can also contribute to the app-less user experience through my mobile development background, while connecting the firmware telemetry flow to a secure, scalable cloud service. The requested ESP32-C3, ToF, I2C, BLE/Web Bluetooth, battery, and benchtop hardware work should be handled with an embedded specialist where required; my strongest contribution is delivering the API, cloud trigger, notification, deployment, and integration layer cleanly and reliably. Choose me for the backend and IoT-cloud integration, and I will help turn the prototype into a connected, testable system with clear source code and deployment support.
$150 CAD in 1 day
3.7
3.7

Greetings Dear Hiring Manager I can develop your ESP32-C3 fuel monitoring prototype with ToF sensing BLE telemetry and WhatsApp alerts 1. Which ToF sensor model will be used? 2. How will the sensor be mounted on the fuel tank? 3. What battery runtime is required? 4. Should BLE use Web Bluetooth without a mobile app? 5. Do you have WhatsApp Cloud API credentials and webhook access? I am waiting in chat to discuss your project in more detail Best Regards Dr Kainat
$31 CAD in 7 days
3.4
3.4

Ottawa, Canada
Payment method verified
Member since May 6, 2017
$30-250 CAD
$30-250 CAD
$30-250 CAD
$10-30 CAD
$30-250 CAD
$30-250 CAD
₹12500-37500 INR
₹600-1500 INR
$30-250 USD
₹600-1500 INR
$250-750 USD
$250-750 USD
₹1500-12500 INR
₹12500-37500 INR
$750-1500 USD
$250-750 AUD
$750-1500 AUD
₹1500-12500 INR
$1500-3000 USD
$150-300 USD
$30-250 CAD
₹100-400 INR / hour
₹750-1250 INR / hour
$250-750 USD
₹12500-37500 INR