Small project CODESYS 3.5 PLC Automation

@MuhammadUzair16

Hi I am an embedded systems engineer with over 16 years of experience in PLC and industrial automation work, including sequential machine control, sensor interlocks, motor outputs, gates/actuators, timers, and commissioning logic. I can create the CODESYS 3.5 program for your sequence in a clean and easy-to-follow way, so the steps, 10-second timing, safety conditions, and output transitions are clear to test and modify later. For this small project I would first confirm the exact I/O list and sequence conditions, then prepare the logic in the programming style you prefer, such as Ladder/FBD or Structured Text, with comments where useful. I can also help check the behavior against your expected sensor and motor states before delivery. Please contact me to discuss details.

@mzlst50

Hello I can help you in that. please have a look to my profile to learn more about my experience in the related scope.

@Zainrais0786

Looking for an experienced PLC programmer to do a small CODESYS 3.5 automation project for you ? Ive got your back Hi, I am Zain. I can easily handle the task including • Circuit Design • PCB Design • KiCAD / Altium • Mixed Signal PCB Designs / High Frequency PCB Designs • PLC / Industrial Automation / Control System Engineering • Simulations etc. Lets chat. Best regards

@mcollinscalz

Hi there, I am an automation engineer specializing in CODESYS 3.5 development. I understand you need a reliable, modular sequential control program for your loading gate and motor system, and I would love to help you bring this automation project to life. My Technical Approach: I will design a clean, maintainable logic structure tailored to your specific hardware requirements: Sequential Logic: I will implement the control process using either Ladder Logic (LD) or Structured Text (ST), ensuring a robust state-machine architecture that reliably handles the sensor inputs and motor outputs. Timer & Safety: I will configure the 10-second delay using high-precision TON blocks, incorporating proper interlocks to ensure the loading gate and motor cannot operate in conflicting states. Code Quality: My code will be well-commented and organized, making it easy for you to integrate into your existing project or troubleshoot in the future. Deliverables: Complete CODESYS 3.5 project file (.project). Variable mapping and I/O configuration documentation. A brief functional description to assist with your testing and commissioning. I have extensive experience with CODESYS-based platforms and am ready to start immediately. When would be a good time to review your I/O list?

@ahmeplc

Hello there, I understand that you need to get designs and PLC programmer for your product, I'd be more than happy to help you with that. I have +10 years experience in PLC, SCADA, HMI program development and site commissioning. Please feel free to contact me so we can discuss your project in more details. Regards, Ahmed

@uhasnain

Hi I am an embedded systems engineer with experience in Labview sys. I can create the CODESYS 3.5 program for your sequence in a clean and easy-to-follow way, so the steps, 10-second timing, safety conditions, and output transitions are clear to test and modify later. For this small project I will complete in your time limit & budget constraints Please contact me to discuss details. Regards

@naimo4

Turn a basic PLC concept into a working CODESYS 3.5 sequence with reliable timing and clear I/O mapping. I will implement a simple sequential controller that reads your sensors, drives the motor outputs, operates the loading gate, and enforces a 10-second timer for the required step transition logic—using deterministic scan-safe methods and clean state handling. After: you’ll receive a compilable CODESYS 3.5 project (structured POU/variables, readable ladder/SFC or ST), with documented start/stop behavior, edge-detected sensor triggering, interlocks to prevent unsafe motor/gate overlap, and adjustable timing parameters. I can align signal names to your existing hardware so commissioning is fast. Before I begin, I’ll confirm: which sensors/limits you have, motor command types (start/stop vs. direction), gate actuation I/O, timer behavior (one-shot vs. retrigger), and safety/interlock expectations.

@melopgabriel

Hi, Your CODESYS 3.5 project is a straightforward sequential control task: read sensors, drive the motor, operate the loading gate, and manage a 10-second timer reliably. I’ve built PLC logic for small automation systems where timing, interlocks, and clean step-by-step execution matter more than complexity. My focus would be on a clear state-based sequence in CODESYS, with safe transitions, readable IEC 61131-3 logic, and easy adjustment of timer values or sensor conditions. I can keep the program compact and maintainable, with careful attention to start/stop behavior and fault-free handoff between each step. That helps avoid race conditions and makes testing on the PLC much easier. If you’d like, I can help map the sequence into a simple implementation quickly. Best regards, Gabriel

@nimran54

Hey , I am a US based Freelancer, I just finished reading the job description and I see you are looking for someone experienced in Embedded Systems, Control Systems Engineering (PID / MPC), Automation. This is something I can do. I can build your CODESYS 3.5 sequence so the sensors, motor control, loading gate, and 10-second timer work in a clean, reliable state-based flow. I will organize the logic for safe transitions, interlocks, and clear I/O handling, with PLC programming that is easy to test and expand later. To start, I need the I/O list, sensor behavior, motor/gate conditions, and any existing CODESYS project or hardware details. Drop me a message before placing an order price can be discussed after discussion.- Hey , I am a US based Freelancer, I just finished reading the job description and I see you are looking for someone experienced in Embedded Systems, Control Systems Engineering (PID / MPC), Automation. This is something I can do. Read the job description carefully and tell how you will solve their problem and do you need from him to start Drop me a message before placing an order.

@wassimkroud

Hello, I can complete this CODESYS 3.5 project for you. I have experience in PLC programming, sequential control, sensors, motor control, timers, and industrial automation. I will create and test the full sequence including the loading gate and 10-second timer, with clear comments so it is easy to understand and modify. I can start immediately.

@dixondambo

At €22 for a CODESYS 3.5 sequence with sensors, motor, gate and a 10-second timer, the value here is a clean, repeatable state machine, not extra features. Getting the transition logic right the first time avoids rework once it's on a real rig. I'd build this as a sequential function chart: sensor input triggers motor start, gate control tied to position feedback, and the 10-second timer gating the next step. Deliverable would be a tested CODESYS project file plus a short simulation run showing each transition firing correctly, so you can verify logic before any hardware is connected. If the scope is not fully settled, I can give you a free 15-minute scoping consultation here on Freelancer before award, with no payment or commitment required. Which system is the source of truth, and is sandbox access available? Kind regards, Dixon

@anjalio22

I would be grateful for the opportunity to work on your CODESYS 3.5 PLC automation project. I have experience with PLC programming, sequential control logic, sensor integration, motor control, timers, and industrial automation systems. I can develop a clean and reliable sequential control program that includes sensor-based operation, motor control, loading gate logic, and the required 10-second timer. My focus is on writing well-structured, easy-to-understand code that is reliable and simple to maintain. Give me one opportunity to handle your project. I assure you that I will complete the work with full dedication, accuracy, and professionalism. I am confident that my skills and commitment will meet your expectations and deliver high-quality results within the agreed timeline. I look forward to discussing your project requirements and getting started.

@DevDesk

Hello, I can complete this CODESYS 3.5 PLC automation task, including the sequential sensor logic, motor control, loading gate, and 10-second timer. I also have a PiXtend V2-S device available, so I can develop and test the program locally before delivery. I will provide the complete CODESYS project with clear, organized logic.

@nabeeli18

LET ME SHOW YOU, IN UNDER A MINUTE, WHY I’M CONFIDENT I CAN DELIVER THIS PROJECT SUCCESSFULLY. I have successfully completed similar CODESYS 3.5 automation projects, ensuring efficient sensor and motor integration. I understand your goal of creating a seamless sequential control process and can optimize the automation with precise timer management and reliable motor control to meet your requirements effectively. I bring over 3 years of experience in PLC programming and automation, ensuring precision and reliability in every project. I’d love to chat about your project and suggest a follow-up discussion to explore how I can bring your vision to life. Regards, Nabeel Ismail

@TechAGA

Hello, I’m interested in your CODESYS 3.5 PLC automation project. I have experience developing CODESYS applications for sequential control, motor control, sensor integration, timers, and machine automation. For this project, I will develop the sequential logic (based on your control philosophy), integrate sensors and motor control, implement the loading gate and 10-second timer, add interlocks and fault handling, and deliver well-commented, easy-to-maintain CODESYS code. I will also test the logic using the CODESYS simulator. I'm available to start immediately. Please share the control philosophy, PLC model, and I/O details. Best regards, Kiran

@sandipm1307

With my comprehensive understanding and experience in industrial automation, I am confident in my ability to deliver top-notch results for your CODESYS 3.5 PLC automation project. Not only have I worked across various PLC platforms, but I am also well-versed in integrating these systems with Python, Node-RED, Google Sheets, and cloud-based solutions like someone versed in new. These skills allow me to provide solutions that are not just technologically advanced, but also highly efficient and easily accessible. Having proficiency in specialized industrial communication protocols including Modbus TCP/RTU, OPC UA, Ethernet/IP, and MQTT, I can ensure seamless integration between the different components of your sequential control process. My experience specifically with CODESYS 3.5 will aid me in quickly understanding and executing your project requirements. Furthermore, as an Automation Engineer, I acknowledge the paramount importance of reliability and functionality in industrial processes. By leveraging my knack for detail-oriented work and clean programming practices, I can assure you a robust and well-documented code. Not to forget my goal always remains in helping clients automate processes whilst enhancing efficiency reducing manual work. With me, you're not only getting a technically proficient freelancer á l'aise with the subject matter but you're hiring someone who is dedicated to helping you streamline your operations for improved results.

@vishnus0608

Electrics & Automation Engineering Manager with 17+ years of experience in Industrial Automation and Electrical design with * Extensive hands-on experience Detailed Electrical & Automation Engineering, * PLC, DCS, SCADA, HMI, Intelligent Motor Control Center,Instrumentation * VFD Drives, Stepper Motor, Servo Drives, position Control, Motion Control * Rockwell / Allen Bradley PLC -Studio5000,RS Logix5000, RS Logix500, Factory Talk, PlantPax * Siemens PLC - Siemens-TIA Portal, PCS7, WinCC, * Schneider PLC-Ecostruxure Process Expert, Aveva Plant SCADA, Schneider-Unity Pro XL, Vijeo Citect, Ecostruxure Machine Expert, Vijeo Designer HMI * ABB PLC-Control Builder * Codesys Development System * Beckhoff PLC - TwinCAT * Automation Direct - Productivity PLC, Click PLC, Cmore HMI * Delta PLC - DiaStudio, ISP Soft, DiaView HMI * Aveva Edge, Indusoft Webstudio * Phoenix Contact - PC Worx and Visu+ HMI * Intelligent Motor Controllers IMC (Siemens Simocode, ABB UMC100) * Motion Control , Position Control - Stepper Motor Control, Servo Motor Control, PWM * Industrial Communication Protocols (Profibus-DP, Profibus-PA, Modbus-TCP, Modbus-RTU, Ethernet/IP, Controlnet, TCP/IP, MQTT) * Knowledge of C#, SQL, Python, HTML, Microsoft .NET, Visual Studio, Power BI

@joshuak485

Hi, this is Joshua from Davis. I have strong PLC automation experience and deliver clean control logic. I understand you need a small CODESYS 3.5 sequential control project. The goal is to coordinate sensors, motor control, a loading gate, and a 10 second timer in a reliable sequence. I can build a simple and maintainable solution that fits the process flow. I would implement the sequence in structured CODESYS logic with clear states, safe transitions, and easy tuning for the timer and I O signals. I will keep the code organized so it is simple to test, adjust, and expand later. I can communicate in real time in your time zone and can provide a simple demo or part of the project within 12 hours of starting. Q1: What are the exact sensor inputs and output devices? Q2: Do you want the sequence in ST, FBD, or ladder? Q3: Do you have the full I O list and timing steps ready? Best regards, Joshua

@Glexy111

Hello, I have seen your are looking PLC programmer working in CODESYS 3.5, PLC and Motor Control I am having 7 years of experienced as automation engineer and I will work according to your sequential control process, sensor inputs, motor control, loading gate logic and 10-second timer Please share more details of your project. Looking forward to your response Thanks