Residential Subdivision Electrical Design

@azraazeen9

As an experienced electrical consultant and designer, I have the right blend of skills to complete your Residential Subdivision Electrical Design project. My proficiency in AutoCAD, Building Architecture, CAD/CAM and Electrical Engineering coupled with my notable experience in project management makes me uniquely qualified for this task. I understand the key aspects involved in your requirement and the importance of a fully functional electrical network in residential subdivisions. I can thoroughly review your subdivision plan and existing electrical/network arrangements to ensure each of the new lots gets its separate underground power supply as per the Western Power requirements. Having commendable engineering and design expertise, I can develop precise Single Line Diagrams (SLD), along with detailed site drawings, that will explicitly show Western Power's point of supply, existing and proposed assets, underground supplies to each lot, service pillars, metering arrangements and more - just as you've outlined. With my attention to detail and dedication to delivering high-quality output, I'm confident I'll provide you with meticulous designs professionally suitable for submission to Western Power.

@AITSoft

Hi, I understand you need the electrical servicing design for splitting one property into two lots in Western Australia. I can review the subdivision plan and current network setup, confirm the point of supply and Western Power requirements, then prepare the separate underground supply arrangement for both lots. I will include the SLD, electrical servicing plan, cable and protection details, metering arrangement, existing connection changes, PDF files, and editable DWG files. I can also handle the required correspondence and reasonable drawing updates after Western Power review. I will confirm the full fixed fee and earliest start date after checking the available site information. Can you provide the approved subdivision plan, existing connection details, available site photos, and any previous Western Power correspondence for review?. I will keep the documentation clear and suitable for Western Power submission, with all relevant existing and proposed assets shown accurately.

@manusharma2992

With my extensive engineering and design experience, particularly in AutoCAD, I am confident in my ability to deliver exceptional results for your Residential Subdivision Electrical Design project. I have a sharp eye for detail and deep understanding of electrical systems, making me well-equipped to review the subdivision plan, liaise with Western Power to gather all necessary information, and develop an appropriate electrical servicing arrangement tailored to the unique requirements of each new lot. Moreover, my proficiency in producing precise Single Line Diagrams (SLD) and other electrical/site drawings is a key asset for your project. I have successfully prepared and delivered SLDs for various projects in the past, ensuring clarity on existing and proposed Western Power assets, consumer mains, metering arrangements, and lot boundaries among others - all of which are essential elements we'll need to address in your project. Sincerely Manu R.

@engrusmanfaiz

I can complete the electrical servicing design and documentation for your two-lot residential subdivision, including the Western Power requirements and submission drawings. I will review the subdivision plan and existing electrical arrangement and develop the proposed separate supply arrangement for both lots. The scope will include the SLD, electrical/site servicing plan, point of supply, pillar/dome, consumer mains, cable sizing, protection and metering details. I can also prepare the required editable CAD/DWG files and final PDF documentation suitable for Western Power submission. I will coordinate the technical requirements with Western Power based on the available site and subdivision information and incorporate their reasonable review comments. I have experience with electrical distribution, LV systems, protection, cable sizing, single-line diagrams and electrical design documentation. My fixed lump-sum fee for the complete scope described is AUD 500 including reasonable design revisions. The estimated completion period is 10–14 business days, subject to receiving the required site and subdivision information and Western Power response times. I can commence within 1–2 business days after receiving the project information. Please share the approved subdivision plan and available Western Power/site information so I can begin the review. Regards Engr Muhammad Usman

@sakshis576

As an experienced 3D designer with a knack for detail, I feel confident in taking on your residential subdivision electrical design project. My comprehensive understanding of AutoCAD and CAD/CAM will ensure that I can provide you with high-quality drawings that fulfil all your requirements including the Single Line Diagram (SLD) and all relevant electrical/site drawings. Having previously worked on similar projects, I grasp the significance of effective communication and coordination for a subdivision connection. My diligent liaison with Western Power will ensure not only the gathering of all required information but also the subsequent delivery of final documentation approved by Western Power for the proposed point of supply/connection arrangement.

@ahmedassad902

Hello, I fully understand your needs, as I have previously worked on a project similar to your specifications. I am an experienced architect specializing in 3D design and rendering. I have extensive experience using AutoCAD, SketchUp, and Revit 2027, and I can deliver the required design drawings on time. I would be delighted to work on your project. I have carefully reviewed your project details. If you choose me, your project will be completed quickly and to a high standard. Thank you for your interest.

@sahildogra222

Hello Client, This is not an AI bid; this is a self response. Your Western Australia residential subdivision requires a submission-ready electrical servicing arrangement, coordinated with Western Power and clearly documenting separate supplies for both lots. I can develop the required CAD/CAM documentation and design package, including the Single Line Diagram, electrical/site servicing plan, editable DWG files, cable and protection details, metering arrangements, and revisions arising from Western Power comments. I will first review the approved subdivision information and existing network arrangement, then coordinate the proposed point of supply and underground assets into a clear, technically consistent submission set. I can commence promptly once the subdivision plan and available site information are provided, with the final package coordinated around Western Power’s confirmed requirements. Has Western Power already nominated a point of supply or provided any existing network records for this subdivision? Best regards, Sahil

@kashifsani

Dear Sir, Please contact me to get started. Thanks. I am an Electrical Design Engineer having 17+ years of experience in Design of Electrical System for Residential and Commercial low/high rise buildings. I will provide all aspects of Electrical System for your project as per standards (NEC or any local if any) and specification within the required time and budget. I will also share my previous samples. Well versed in; 1. Lighting Layouts 2. Power Layouts 3. Single Line Diagram 4. Fire Alarm System 5. ELV (Subject to Client’s requirement) 6. Lighting Protection System 7. Design Calculations 8. Equipment Installation Detail Drawings. 9. Take-off sheets and Bills of quantity 10. Technical Specifications and more.

@mzdesmag

Hello sir, Did go through your job description and glad to share that I have enormous experience in Residential Subdivision Electrical Design I'm a seasoned programmer and Engineer with quality experience in Flutter, React, Node.JS, SpringBoot, Frontend and Backend Development, Python, Matlab, R studio, C, C++, C#, OpenCV, OpenGL, Tesseract OCR, google vision, Statisticaal programming/R progamming data analysis Computing for Data Analysis Time Series & Econometric, Machine learning, AI, Deep learning, Matlab and Mathematica, 3D modeling, CAD/CAM,AutoCAD, 2D, Architectural Engineering, SolidWorks, Unity 3D, AutoCAD, 2D drawing, 2D draftingPCB, Electronics, Arduino, Embedded Systems Automation, Embedded and Firmware , IOT, Electrical/Mechanical Engineering I am a TOP Rated Freelancer, and you can check my reviews here as well: https://www.freelancer.com/u/mzdesmag. Looking forward to potentially working together on this project. Thanks and Best regards, Adekunle.

@SkillCrafts

I understand you need a comprehensive electrical connection design for your Western Australian residential subdivision, similar to the work I've completed for other developers navigating complex Western Power requirements. My experience ensures efficient processing and compliance. My approach involves meticulously reviewing your subdivision plan and existing site information. I will then directly engage with Western Power, leveraging my established contacts and understanding of their application processes to secure all necessary connection details, including network capacity assessments and service connection points. I will produce all required design documentation, adhering strictly to Western Power standards and relevant Australian Standards. Could you confirm if there are any existing underground services on the property that are not yet documented? I'm eager to discuss how I can expedite this process for you.

@hayat38402

Hi, how are you doing? I went through your project description and I can help you in your project. your project requirements perfectly match my expertise. We are a team of Electrical and Electronics engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas:  Antenna Design (CST, HFSS)  Embedded C Programming.  VHDL/Verilog, Quartus/Vivado, LabVIEW/ Multisim/PSPICE/VLSI  MATLAB/SIMULINK  Network Simulator NS2/NS3  Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC, STM32 and ESP32.  IDEs like Keil MDK V5, ATmel studio and MPLab XC8.  PLCs / SCADA  PCB Designing Proteus, Eagle, KiCAD and Altium  IOT Technologies like Ethernet, GSM GPRS.  HTTP Restful APIs connection for IOT Communications. Also, we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements.

@MHS1490

Hi, I can assist with the complete electrical servicing design and Western Power coordination for your residential subdivision in Western Australia. I understand that the key requirement is to provide compliant, submission-ready documentation for two separate lots, with each lot having its own underground electrical supply. I will take responsibility for the design process from review through to final documentation. My scope will include reviewing your subdivision/site information, assessing the existing electrical arrangement, coordinating directly with Western Power to confirm the point of supply and network requirements, and developing the proposed servicing arrangement. I will prepare professional, submission-ready documentation including the Single Line Diagram (SLD), electrical/site servicing plan, cable and protection details, pillar/dome arrangements, consumer mains, metering, existing connection modifications/removals, and relevant calculations. I will also manage reasonable amendments resulting from Western Power's review so the design can progress toward acceptance without unnecessary back-and-forth for you. You will receive: • Final SLD – PDF • Electrical servicing/site plan – PDF • Editable CAD/DWG files • Required calculations/details • Western Power correspondence/confirmation • Final drawings suitable for submission I’m ready to commence promptly and can confirm my earliest start date and fixed fee immediately. Best regards Mohammad

@LandMark

Hi, We bring over 11 years of CAD and engineering documentation experience using AutoCAD, Fusion 360, and SolidWorks, with strong capability in detailed site plans, technical drawings, electrical layouts, and coordinated design documentation. How can we clearly develop the servicing arrangement so each new lot has its own separate underground electrical connection and supply? We can prepare accurate electrical/site servicing drawings, Single Line Diagrams, editable DWG files, PDF documentation, cable and protection details, metering arrangements, and clearly identify existing and proposed assets, pillars, consumer mains, and lot boundaries. We can carefully follow the approved subdivision information and maintain consistent, submission-ready drafting throughout the package. Please note that Western Power liaison, regulated electrical approval, and professional certification would need to be handled by the appropriately authorized local electrical consultant. We look forward to supporting the documentation efficiently. Best Wishes

@eslamsaeid1991

Hello sir I have 11 years of experience as a Senior Electrical Power Systems Engineer leading an electrical design team across residential, commercial, and utility infrastructure projects. We regularly handle Western Australia (WA) residential subdivision electrical connection designs, liaising directly with Western Power to establish Points of Supply (POS), position underground service domes, and develop fully compliant engineering drawing sets. Western Power Subdivision Engineering & Design Strategy Western Power Liaison & Network Assessment: Submitting and tracking the formal connection application through the Western Power Partner Portal / Design Information Kit (DIK) process. Assessing existing Low Voltage (LV) distribution assets adjacent to the property (overhead mains, underground cables, distribution transformers, and existing pillars/green domes).Confirming the nominated Point of Supply (POS) and verifying whether the existing service connection can be retained for Lot 1 or requires relocation to a new dual-user green dome / mini-pillar. Electrical Servicing & Engineering Design: Load Sizing & Calculations: Calculating Maximum Demand per AS/NZS 3000 (typical 32A} or 63A single-phase allowance per lot) and verifying voltage drop and fault loop impedance for underground consumer mains. ESLAM

@edwina245

Hello, I have experience preparing residential subdivision electrical servicing designs, including SLDs, underground supply layouts, pillar locations, consumer mains, metering, protection, and utility coordination. I am a good fit because I can take the approved subdivision plan through to a coordinated two-lot servicing arrangement suitable for Western Power review. I will review the existing network, liaise with Western Power to confirm the point of supply and servicing requirements, then prepare the SLD, site plan, cable/protection details, calculations, and editable DWGs. I will incorporate reasonable Western Power comments and update the drawings until the proposed connection arrangement is accepted. Final delivery will include the approved servicing documentation, relevant correspondence, PDFs, and CAD files. Thanks for reading my proposal. Edwin

@bkstudio108

Hello Sir / Ma'am, Ar. Bhagyesh is here we have expertise in our field of architectural and interior designing I just go through your Job description I can do Residential Subdivision Electrical Design as per your requirements I am really interested to work with you on the project, Feel free to contact me will discuss it in the chatbox we will have detailed discussion about your requirement and what we can offer with our best price, time and quality then proceed toward the completion of your requirements Regard, Bhagyesh

@MarcElectric

Hei, I am an electrical designer with extensive experience in designing utility connections for residential subdivisions; I have all the necessary resources for an efficient remote workflow. Using AutoCAD, Schneider, Bticino, SIMARIS, PVSyst, and DIALux, I can handle the complete electrical connection design package for your two-lot subdivision. I will review site plans, design the underground infrastructure layout, calculate cable and main feeder sizing, and produce compliant, detailed single-line diagrams (SLDs) and system layouts—indicating supply points, distribution pillars, and meter configurations. Please contact me via chat. Thanks.

@TheDesignBloke

Hello, I reviewed your requirements, and the core challenge is coordinating the subdivision servicing design with Western Power requirements so both lots receive clearly defined independent supplies and the submission is technically consistent. I would review the subdivision and existing network information, establish the proposed point of supply and pillar arrangement, then prepare the SLD, servicing plan, cable and protection details, and coordinated DWG/PDF documentation. I have worked on electrical site servicing, subdivision documentation, and utility coordination projects and can share relevant samples once we connect in chat. Also a quick question, do you already have recent Western Power information for the existing supply and network arrangement, or will this need to be established from the outset? Best Regards, Muskan

@humartist101

Hi there, I have the expertise to complete your WA subdivision electrical design, liaise with Western Power, and prepare SLD and site drawings for both new lots. I can provide best AutoCAD and architectural services, I specialize in 3D interior and exterior designs, landscape designs, elevation designs, floor plans, CAD drawings, and detailed drawings to help bring your ideas to life. You can view my previous work here: https://www.freelancer.com/portfolio-items/10388227-3d-interior-rendering https://www.freelancer.com/portfolio-items/8610743-3d-exterior-rendering https://www.freelancer.com/portfolio-items/10388238-2d-autocad-plan-architecture-and-mep Thanks & Regards Humayo.