CFD Ventilation Design for Underground Parking

@saleiz2019

Hi, Please share the architectural sketches so that I can create a 3D fluid volume with the cars and ventilation devices subtracted. I will then assign inlet and outlet ports with jet fans as located in the sketches and run CFD simulations to show the temperature and air flow distribution map. I will use ANSYS Fluent for the simulation and ANSYS SpaceClaim for the 3D modeling. I have done related projects for datacenter rooms, cinema halls, and classrooms. I will share sample results on the chat. With my CFD expertise and thermal engineering master's degree using ANSYS for more than 10 years, I believe I will deliver results that exceeds your expectations. I look forward to discussing further details on the chat. Best regards, Saleamlak A.

@azraazeen9

As an experienced CAD and simulation expert with a specialization in mechanical engineering, I believe I have the comprehensive skill set that aligns perfectly with your project needs. My expertise in AutoCAD, Revit, and other relevant software, combined with my fluency in CFD simulations, makes me well-positioned to convert basic architectural sketches into a highly precise and optimized 3-D model. I have a proven track record of conducting detailed simulation studies for complex designs like underground parking ventilation systems, including steady-state and transient scenarios. For the ultimate success of your project, I am fully equipped to provide you with native CFD files alongside exportable geometries while offering concise but comprehensive visualizations of velocity, pressure, temperature, and contaminant concentration. Moreover, my accustomed familiarity with Fluent, FDS, OpenFOAM will guarantee well-documented design iterations supported by high-quality energy calculations to save your power consumption without compromising performance. Lastly, my proficiency in producing top-notch technical reports summarizing methodology and important plot points will ensure an easy handover for your MEP contractors

@beingmrme

HI, I can deliver CFD-based underground ventilation design support in Revit with optimized airflow planning, smoke extraction analysis, and coordinated BIM documentation focused on safety, code compliance, and efficient ventilation performance. 1️⃣ What type of underground space is involved—parking garage, tunnel, basement, or industrial facility? 2️⃣ Do you already have Revit/CAD models, airflow requirements, or ventilation calculations available? 3️⃣ Do you need only CFD simulation support or also complete Revit coordination and HVAC layout documentation? Warm regards, The Blend Nation.

@ENG1mga

Welcome I MADE MANY SMART DEVICES THAT MANUFACTURED AND USED IN REAL YOU WILL GET IT DONE PERFECTLY IN LESS TIME CHECK MY LATEST REVIEWS > (http://www.freelancer.com/u/ENG1mga) I have previously worked on, Lifting Set of Drones Mechanism, Robotic Arm, Delivery Robot, Automatic Wiring Machine, Solenoid Engines, Car Rooftent, Boat Lift Mechanism, Shoe Treadmill Mechanism Mechanical Ventilator and many other projects. I use Solidworks, Fusion 360, and ANSYS, COMSOL I have a workshop specializing in all 3D printing and CNC machining work, so I strive to provide the highest quality and precision. What you will receive with me: - 2D drawings - 3D files - Complete Tech. Formats - Finite Element Analysis (FEA) (if needed).

@manusharma2992

I will start it today and also can finish this job ASAP - Coming out of mechanical engineering with specific expertise in simulation and thermal analysis, I am confident that I can deliver the CFD ventilation design you need for your underground parking facility. My proficiency in AutoCAD and Revit will ensure a seamless translation of your architectural sketches into a clean 3D model ready for simulation. Additionally, my experience with Fluent, FDS, OpenFOAM and the likes have honed my ability to extract precise visualizations of crucial data components like velocity, pressure, temperature, and contaminant concentration essential to accomplishing your three objectives. Though I may not have an exact example on 'underground parking', my experience with Architectural modeling (2D/3D) coupled with Technical Drawings (CAD/CAM) in various domains from structural to mechanical definitely puts me in good stead. It's time you entrust your ventilation design project to someone who knows how to breathe life into simulations - I look forward to hearing from you soon!

@ahmedzegho

Hi, I’m very interested in supporting your underground parking ventilation project. With a background in mechanical engineering and HVAC design, I can assist in developing the 3D geometry from the architectural sketches and carrying out CFD-based airflow assessment to optimize the jet-fan strategy for both normal ventilation and smoke extraction scenarios. My approach is to build a clean simulation model, evaluate airflow distribution, contaminant removal, pressure behavior, and iterate the fan layout to improve performance while reducing power demand. I focus on practical, buildable solutions with clear documentation and coordination for implementation. Deliverables can include simulation files, geometry exports, visual results, final jet-fan layouts with specifications, and a concise technical report suitable for contractor handover and approval workflows. I’m comfortable working through review stages and refining the model until performance targets and compliance requirements are achieved. Looking forward to reviewing the sketches and discussing the project further.

@frosthp

Hello, I can send you example of my CFD report of CO2 in the parking zone, I will convert your plan to 3d by SpaceClame of Solidworks. I am using Ansys Fluent for CFD. Need to know air inlet outlet, CO2 inlet outlet. Feel free to contact me.

@sakshis576

Hi, As an experienced 3D designer and CFD specialist with expertise in AutoCAD, Revit, and other equivalent solvers, I am confident that my skills align perfectly with your CFD Ventilation Design needs. I have a strong command over producing clean 3D models from architectural sketches, which is crucial for effective simulations. My comprehensive understanding of CFD in Fluent, FDS, OpenFOAM (and similar) will allow me to provide you with clear visualizations of key variables such as velocity, pressure, temperature and contaminant concentration. Best regards, Sakshi masih

@engrhasan01

Are you looking for a CFD engineer who can take your underground parking concept from early architectural sketches through to a fully validated jet-fan ventilation strategy with code-compliant smoke extraction analysis? I’m a Mechanical/CFD Engineer with experience in ventilation analysis, airflow optimization, and smoke-control studies for enclosed environments using industry-standard simulation workflows. Scope I Can Support 3D CAD reconstruction from architectural sketches Parking garage airflow and smoke propagation simulation Jet-fan placement optimization for minimum power consumption Steady-state and transient CFD analysis Contaminant, velocity, pressure, and temperature visualization Code-oriented ventilation verification for enclosed car parks Deliverables Simulation-ready 3D model Native CFD project files + exportable geometry Technical PDF report with methodology and convergence summary Jet-fan layout drawings with specifications Flow, pressure, temperature, and smoke concentration plots Handover walkthrough/video session for contractor coordination Best regards, Hasan

@msajid788

Hello, With my broad range of technical, design, and analysis skills, I would be an ideal fit for your CFD ventilation study. I excel in translating architectural sketches into comprehensive 3-D models that are primed for simulation using tools like AutoCAD and Revit, which I know you value. This specialization has seen me deliver numerous successful projects, turning sometimes rough sketches into polished designs that satisfy international standards. I commit to producing native CFD files with exportable geometry plus a PDF report summarizing all pertinent details. Allow me to walk you and your contractor through this project via video call upon completion & let's create an efficient underground parking facility together!

@birspetech

Hi! I'm Aditi and this CFD project for your parking facility sounds like a prefecr fit. I'm really quick translating architectural sketches into 3D models and have heaps of experience with underground parking ventilation, optimising fan layouts and ensuring code compliance. I've got examples of similar work too! I can dive in immediately; would love a super quick chat to discuss.

@edwina245

Hello, I have completed CFD-based ventilation and smoke-control studies for enclosed parking and MEP spaces, including 3-D model cleanup, jet-fan airflow review, contaminant removal, and report-ready visuals. This project is a strong fit because it needs both practical CFD execution and clear layout decisions your contractor can use. I will convert your sketches into a clean simulation model, set up steady and transient cases, compare jet-fan options for coverage and power use, and refine the layout until airflow, smoke clearance, pressure, temperature, and contaminant results meet the target criteria. I will also document assumptions, convergence, code checks, energy calculations, final fan locations, specifications, and handover notes in a concise PDF with native files and drawings. Thanks for reading my proposal. Edwin

@stevenk518

Hi, I can help develop the full CFD study for your underground parking ventilation system, including 3D model preparation, airflow/smoke simulations, and optimized jet-fan placement. I have experience with CFD-based ventilation analysis, smoke extraction studies, and airflow optimization using Fluent/OpenFOAM workflows. The final delivery will include simulation files, compliance-focused reporting, airflow visualizations, and practical jet-fan layout recommendations with energy considerations. I can also provide a clean handover package for your MEP contractor, including geometry, fan specifications, and a walkthrough of the final model and results.

@andrasr69

Hi there, I noticed that you need a full CFD study and optimized jet-fan layout for an underground parking facility. I’ve completed fully coordinated ventilation and airflow simulation projects before with similar safety and performance constraints. As a skilled CFD and mechanical design engineer with 7+ years of experience, I specialize in Fluent, OpenFOAM, AutoCAD, and HVAC airflow analysis, delivering accurate simulations, smoke-control validation, and code-compliant ventilation reports. Best regard. Andres

@sarahmirza5060

Hello, I’m an aerospace engineer with experience in CFD, ventilation flow analysis, aerodynamic simulation, and engineering post processing using ANSYS Fluent and related tools. I have worked on external and internal flow studies involving airflow distribution, pressure losses, recirculation regions, and flow optimization for engineering systems. For your underground parking project, I can develop the 3D CFD geometry from the architectural sketches, perform ventilation and smoke extraction analysis, and optimize the jet fan configuration for both airflow performance and energy efficiency. The study can include steady and transient scenarios along with airflow, contaminant concentration, pressure, and temperature visualization. Deliverables can include native CFD files, geometry exports, compliance oriented reporting, optimized fan placement drawings, and technical summaries explaining design iterations and assumptions. My focus is on producing stable, traceable simulations that are practical for MEP implementation and code review rather than only visual CFD results. Looking forward to reviewing the sketches and project requirements.