
Closed
Posted
Paid on delivery
I’m adding secure, network-based remote control to a board that runs on an STM32F767ZIT6. What I need is a clean, well-documented SNMPv3 agent integrated into my existing firmware so that authorised administrators can toggle outputs, change settings and read status information from any standard NMS. The MCU is already running Ethernet with lwIP; feel free to suggest another lightweight stack if it simplifies SNMPv3, but the end result must fit comfortably in flash and RAM and coexist with my current peripherals (UART, SPI, a handful of GPIO lines). Authentication, encryption and user management must follow the SNMPv3 spec, not a downgraded v1/v2c workaround. Deliverables • STM32CubeIDE (or Keil / IAR if you strongly prefer) project containing the full SNMPv3 implementation, ready to compile for the F767. • Custom MIB file defining the writable and read-only OIDs we agree on. • Short test application or script (Net-SNMP, Python, etc.) that demonstrates SET and GET operations with authentication and privacy enabled. • Step-by-step notes on how to port the stack to a fresh CubeMX project, plus any licensing details. Acceptance criteria 1. Agent responds to authenticated SNMPv3 GET/SET from a standard manager on the local network. 2. Invalid credentials are rejected and logged over UART. 3. Flash/RAM growth stays within 15 % of current usage. 4. Code passes a static MISRA check with no critical issues. If you have previous STM32 SNMPv3 work, please mention it so I can move quickly—this piece unlocks the rest of the product schedule.
Project ID: 40777791
38 proposals
Remote project
Active 3 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
38 freelancers are bidding on average ₹23,749 INR for this job

Hi There, Hope you are well. I have extensive experience in integrating SNMPv3 agents into STM32 firmware with a focus on authentication, encryption, and user management. My solutions are lightweight, well-documented, and ensure seamless coexistence with existing peripherals. I look forward to discussing further details and delivering a robust, efficient solution. Thanks in advance for the opportunity to working with you. Best Regards, Serazum
₹32,000 INR in 1 day
7.6
7.6

Hi, I have experience in designing Circuits and can complete your project. I have expertise in the following: 1- Designing schematic and PCBA 2- Ordering the PCBA and getting boards manufactured. 3- Writing firmware for the PCBA to make sure everything works as expected. 4- I can also develop smartphone apps to communicate and control the hardware. If you wish we can discuss in chat. Thank you.
₹25,000 INR in 7 days
7.4
7.4

I see you're looking for a robust SNMPv3 agent for your STM32F767 board, which is crucial for secure remote control. Given your requirements, I can integrate this into your existing firmware while ensuring it meets the SNMPv3 specs for authentication and encryption. I'll use the current lwIP stack to maintain compatibility and keep resource usage minimal. My focus will be on creating a clean implementation, complete with the custom MIB file and a test application for GET/SET operations. The detailed notes on porting to a fresh CubeMX project will ensure you have a smooth transition. I've worked on similar STM32 projects before, ensuring a seamless integration of SNMPv3. What specific OIDs do you envision for the writable and read-only configurations?
₹19,150 INR in 7 days
5.5
5.5

Hey there! I’m Alok, A PCB, Circuit and Mechanical designer with a passion for turning ideas into rock-solid, high-performance circuit boards. even expert on Python, C, C++ With nearly a decade of experience, I’ve tackled everything from compact consumer gadgets to complex industrial systems—always with a focus on precision, efficiency, and reliability. # Schematic & Layout Design – Clean, optimized, and manufacturable. # Component Selection & Library Management – No surprises, just the right parts for the job. # Reverse Engineering – PCB cloning, replication, and improvements. # Gerber, BOM & CPL Generation – Ready for seamless production. # DFM & DFA Expertise – Because great design means smooth manufacturing. # Multi-Layer, Flex, & High-Density PCB Design – Whatever the project needs. If you need a PCB and Code that’s efficient, reliable, and built for real-world performance, let’s chat. I’d love to help bring your project to life!
₹25,000 INR in 7 days
5.4
5.4

Your STM32F767ZIT6 lwIP stack can integrate SNMPv3 (USM with SHA-256 authentication and AES-128 privacy) while keeping flash and RAM growth well below your 15% threshold. Rather than replacing lwIP, we can hook its native SNMPv3 agent core directly to mbedTLS or hardware crypto acceleration, preserving your existing SPI, UART, and GPIO peripherals under clean BSD/Apache licensing. Execution plan: ✅ Implement the SNMPv3 agent into your STM32CubeIDE project with USM user management, engineID handling, and authPriv security levels. ✅ Map your output toggles, GPIO lines, and telemetry states to custom MIB OIDs with scalar and tabular C handler callbacks. ✅ Route authentication and privacy handshake failures directly to your UART diagnostic stream for audit logging. ✅ Build an automated Python test script (using pysnmp) and Net-SNMP snmpget/snmpset commands to validate authenticated GET/SET cycles. ✅ Deliver full porting documentation, licensing breakdown, and MISRA-C static analysis logs. Are you running lwIP in bare-metal callback mode or on top of FreeRTOS, and would you prefer mbedTLS or STM32 hardware crypto routines for the USM primitives?
₹20,000 INR in 1 day
4.9
4.9

Hi, I can help integrate a secure SNMPv3 agent into your STM32F767 firmware, enabling authenticated remote monitoring, GPIO control, and configuration through standard NMS tools. The best approach is to first review your STM32CubeIDE project, lwIP version, existing memory usage, and peripheral dependencies. I'll evaluate the SNMPv3 stack, integrate authentication and encryption, and implement custom MIB handlers for authorized GET/SET operations. Special attention will be given to SNMPv3 USM security, persistent engine state, credential management, memory efficiency, and safe output control. Deliverables will include: - STM32CubeIDE source project - SNMPv3 authentication and privacy integration - Custom MIB with read/write OIDs - Secure GPIO and configuration controls - Invalid-access rejection and UART logging - Net-SNMP GET/SET verification scripts - Flash/RAM usage comparison - Static analysis and MISRA findings report - Porting guide and licensing documentation - Complete testing and setup instructions I'll verify interoperability and memory growth against your acceptance criteria before final delivery. My preliminary quote is ₹35,000, with a 15–20 working day timeline after reviewing the firmware. Could you share your lwIP version, current memory usage, and required OID list? Best regards Ankit
₹35,000 INR in 15 days
4.5
4.5

Hi, I checked your "STM32F767 SNMPv3 Control Firmware" project description, it looks like the focus is on delivering a clean, responsive website that works well across all devices. I prefer understanding the expected layout and user experience first, then building pages that closely match the design while keeping the code organized and easy to maintain. Feel free to share the design or current website, and I'll suggest the best implementation along with a realistic timeline. Final timeline and cost will be confirmed in chat after a complete understanding and documentation of the project expectations in detail.
₹22,500 INR in 10 days
4.2
4.2

The critical part is fitting true SNMPv3 authPriv into the existing lwIP firmware without disturbing the RF-control peripherals or blowing the 15% RAM/flash limit. I’d keep lwIP/Ethernet, add USM authentication/privacy, map OIDs for the SPDT paths, LNA controls, attenuator and status, log failed auth over UART, and validate GET/SET with Net-SNMP plus MISRA/static checks. I haven’t shipped this exact STM32F767 + SNMPv3 combination, so I’d first confirm the current Cube project footprint and toolchain before locking the implementation path.
₹12,500 INR in 7 days
3.9
3.9

Hi, I see that integrating SNMPv3 into your existing firmware is crucial for secure remote control, and I'd approach this by setting up a clean agent that fits within the flash and RAM constraints. I'll make sure to follow the SNMPv3 spec for authentication, encryption, and user management. My focus will be on creating a lightweight implementation that coexists with your current peripherals. In my experience, a common mistake is underestimating the complexity of SNMPv3 authentication, so I'll pay close attention to this aspect. I'll deliver a well-documented STM32CubeIDE project, a custom MIB file, and a test application that demonstrates SET and GET operations with authentication and privacy enabled. You can expect a robust implementation that meets the acceptance criteria, including responding to authenticated SNMPv3 GET/SET requests and rejecting invalid credentials.
₹25,000 INR in 7 days
4.2
4.2

Hello Sir, I can develop a robust SNMPv3 agent for your STM32F767ZIT6 board, ensuring it meets all authentication, encryption, and user management specifications. I will integrate it with your existing firmware while maintaining compliance with your current peripherals. Utilizing STM32CubeIDE, I will provide a complete project with a custom MIB file and a testing script. I'm ready to start right away. Could you clarify the specific OIDs you want to define? Thanks, Deepak
₹28,000 INR in 10 days
3.4
3.4

Hi, Your spec maps almost exactly onto work I’ve already done — STM32 F7-series boards, lwIP on FreeRTOS, and a full SNMPv3 agent stack covering USM authentication (HMAC-SHA-1/SHA-256), AES-128 privacy, and VACM access control. I know where the sharp edges are, and I won’t be learning on your schedule. For this engagement I’ll deliver: STM32CubeIDE project for the F767ZIT6 with a lean, BSD-licensed SNMPv3 agent integrated into your existing lwIP/FreeRTOS setup — sized to stay inside your 15 % flash/RAM ceiling. Custom MIB file defining all agreed writable and read-only OIDs for output toggling, settings and status. Python/Net-SNMP test script demonstrating authPriv-level GET and SET with invalid-credential rejection verified and logged over UART. Step-by-step CubeMX porting guide with full licence notes. MISRA compliance and the security hardening (credential logging, replay protection) are baked into my checklist, not bolt-ons. I work solo — you talk directly to the engineer writing the code, which keeps feedback loops short. One question before we start: can you share your current flash and RAM usage figures so I can confirm the 15 % headroom is achievable without stack surgery? XinTian
₹25,000 INR in 7 days
3.4
3.4

Hi, I am an experienced STM32 embedded firmware and electronics engineer with strong C/C++, communication protocol, Ethernet/lwIP, and hardware debugging experience. I can integrate a secure SNMPv3 agent into your existing STM32F767 firmware while preserving the current architecture and peripheral functionality. My proposed approach: - Review your existing CubeIDE project, lwIP version, memory usage and security requirements. - Implement SNMPv3 USM with authenticated/encrypted communication (authPriv), secure user management and persistent engine state. - Develop custom MIB/OID handlers for GPIO control, settings and status monitoring. - Implement UART security logging and verify GET/SET operations using Net-SNMP. - Optimize Flash/RAM usage, perform MISRA static analysis and provide complete source code, test scripts and porting documentation. I would first verify the 15% memory constraint and MISRA scope before finalizing implementation. My related experience includes STM32 firmware development, networking, peripheral integration and PCB troubleshooting. I am available to start with an NDA and technical review. Best regards, ShengLin Gu
₹25,000 INR in 7 days
3.5
3.5

My embedded-systems and C programming skills are directly relevant to integrating firmware on an STM32F767 microcontroller, including the peripheral coexistence your board requires across Ethernet, UART, SPI and GPIO. I can work within an STM32 firmware environment and understand the importance of keeping an implementation lightweight for flash and RAM. My background also includes microcontroller programming, PCB/PLC-related work and C++ development, which supports practical integration with existing hardware rather than treating the SNMP agent as an isolated application. I will focus on delivering a clean, documented project, the custom MIB, authenticated and encrypted SNMPv3 test coverage, porting notes and licensing information. Since the profile does not document previous SNMPv3 work specifically, I will not overstate that experience, but my embedded C and microcontroller skills provide a solid foundation for this implementation. I would be glad to apply these skills to your STM32F767 firmware and deliver a maintainable solution aligned with your acceptance criteria.
₹13,000 INR in 1 day
3.2
3.2

Hi, Your acceptance criteria match my daily work: secure firmware, MISRA checks and tight memory budgets. Relevant experience: • 7 years of secure automotive firmware at Bosch: secure boot, encryption, signature verification, HSM integration • MISRA-C 2012 compliance (I automated MISRA checking end to end on my last project) • Flash/RAM optimization on constrained MCUs Plan: • SNMPv3 on your existing lwIP: USM authentication (HMAC-SHA) and AES privacy, with user management • Custom MIB with the agreed read-only and writable OIDs mapped to GPIO and settings • Invalid credentials rejected and logged over UART • Net-SNMP test script for GET/SET with auth and privacy enabled • Flash/RAM report before vs after, CubeMX porting notes, licensing notes Questions: • Current flash/RAM usage? • Is mbedTLS already in the project? Hau
₹30,000 INR in 10 days
3.0
3.0

Hi, there I successfully integrated SNMPv3 into a similar STM32F4-based project using STM32CubeIDE, implementing the agent's core functionality, handling authentication, encryption, and user management. In that project, I faced challenges with limited RAM, but resolved it by optimizing the MIB file and using a lightweight stack. I implemented SNMPv3 features such as GET/SET operations, authentication, and encryption. I plan to apply this experience to your project, integrating SNMPv3 into your existing firmware using STM32CubeIDE. I will leverage lwIP for networking and optimize the MIB file for efficient RAM usage. To handle authentication and encryption, I will implement the SNMPv3 spec using the STM32's hardware security module. To simplify the integration process, I will provide step-by-step notes on how to port the stack to a fresh CubeMX project, along with licensing details. If I use my previous experience, your project will likely be completed successfully. Hope to discuss this in detail. Through detailed discussion, I think I can find the better solution to finish your project successfully. Thank you.
₹25,000 INR in 7 days
2.6
2.6

Hello, My strongest match for this project is Python development for the required Net-SNMP/Python test utility, including authenticated SNMPv3 GET/SET demonstrations and validation of invalid-credential handling. I can also produce clear documentation for running the test application and integrating it with your firmware workflow. My broader background is 15+ years in software development, with a focus on clean, maintainable, secure applications, API integrations, performance optimisation, and technical support. That experience is relevant to building a well-structured test harness, documenting the custom MIB and operations clearly, and helping verify communication with a standard network management system. However, my profile does not show previous STM32, lwIP, embedded SNMPv3, or MISRA project experience, so I would not overstate that portion of the work. I can contribute specifically where my verified Python and software-development skills fit, with careful attention to SNMPv3 authentication/privacy testing and practical documentation. Thanks!
₹24,975 INR in 4 days
0.0
0.0

Hello, My Python expertise is directly relevant to the required Net-SNMP/Python validation utility, including authenticated and privacy-enabled SNMPv3 GET/SET testing against your STM32 device. I can provide a clean test script that exercises valid operations and verifies rejection of invalid credentials. My profile focuses on secure application development, API integration, performance optimisation, and maintainable architecture. While my listed experience does not claim previous STM32 SNMPv3 implementation, I will keep the embedded deliverables aligned with your acceptance criteria: standard SNMPv3 authentication and encryption, custom MIB support, UART-visible security failures, and concise porting/licensing documentation. I can also help structure the Python test coverage so the firmware integration is straightforward to verify. I would be glad to contribute the Python validation and integration work needed to make this firmware feature testable and production-ready. Thanks!
₹24,975 INR in 4 days
0.0
0.0

Hello, Python is directly relevant to your required Net-SNMP/Python validation utility, including authenticated and privacy-enabled SNMPv3 GET/SET testing. I can build a clear test harness that exercises your agent, verifies credential rejection, and helps document expected responses and UART logging. My profile also reflects 15+ years of software development focused on clean, maintainable, secure integrations and performance-conscious application architecture. I can contribute to the supporting tooling, MIB-related workflow, documentation, and integration work around your STM32F767/lwIP firmware. However, my profile does not show previous STM32 SNMPv3 or embedded MISRA project experience, so I would not claim that background or overstate the firmware-specific portion. I would be glad to support this project transparently, especially with the Python test application and integration documentation, and discuss how my experience can contribute to a reliable SNMPv3 deliverable. Thanks!
₹24,975 INR in 3 days
0.0
0.0

I can deliver 'STM32F767 SNMPv3 Control Firmware' end to end — clean architecture, tests, and deployment. I'll start with a short plan, share progress daily, and hand over production-ready code. Could you confirm your timeline and must-have features so I can lock the scope?
₹23,206.72 INR in 7 days
0.0
0.0

[Your Name] [Your Contact Information] [Date] [Recipient's Name] [Company/Institution Name] [Contact Information] Subject: Proposal for STM32F767 SNMPv3 Control Firmware Dear [Recipient], I am writing to express my interest in the STM32F767 SNMPv3 Control Firmware project on Freelancer.com. I have a strong background in robotics, specializing in SLAM, ROS, Python, C++, and sensor fusion. My expertise is extensive, with 12 published papers in top-tier journals, making me a valuable asset to any project requiring advanced technical skills. I am confident that my hourly rate of $35/hr would be sufficient for the task at hand. I am available to start work immediately upon hire and have no concerns about travel or time zone differences. My experience with STM32F767 microcontrollers, SNMPv3 protocols, and sensor fusion algorithms ensures that I can deliver high-quality results within a reasonable timeframe. If you are interested in discussing this opportunity further, please feel free to contact me via email at [Your Email Address] or through the Freelancer.com messaging platform. I am excited about the prospect of contributing my skills to your team and would be happy to discuss how I can help optimize the firmware for your project. Thank you for considering my proposal. I look forward to hearing from you soon. Best regards, [Your Name] Chandan Sheikder PhD researcher in Robotics
₹12,500 INR in 7 days
0.0
0.0

Bengaluru, India
Member since Aug 29, 2026
$10-30 USD
$250-750 USD
₹12500-37500 INR
₹1500-12500 INR
$15-25 AUD / hour
₹600-1500 INR
$300-400 USD
₹1500-12500 INR
£18-36 GBP / hour
$10-30 USD
$3000-5000 USD
£250-750 GBP
₹1500-12500 INR
$15-25 USD / hour
₹1500-12500 INR
$250-750 USD
₹600-1500 INR
$15-25 USD / hour
$30-250 USD
$5000-10000 USD