Tapis

Carian terbaru saya
Tapis melalui:
Bajet
hingga
hingga
hingga
Jenis
Kemahiran
Bahasa
    Status Pekerjaan
    776 mould drawing tugasan ditemui, harga dalam USD

    Kami mencari 3D designer yang boleh membuat lakaran botol minuman secara 3D bagi tujuan penyediaan mould secara part time.

    $104 (Avg Bid)
    $104 Avg Bida
    8 bida

    ...printable STL file of the aorta (first milestone). Then a mould has to be developed which can be printed with a 3D printer. The challenge will be to design the mould so that the parts can be completely removed from and out of the silicon aorta without destroying the silicone aorta, and that the mould can be reused. I think the mold must consist of different

    $479 (Avg Bid)
    $479 Avg Bida
    35 bida

    ...printable STL file of the aorta (first milestone). Then a mould has to be developed which can be printed with a 3D printer. The challenge will be to design the mould so that the parts can be completely removed from and out of the silicon aorta without destroying the silicone aorta, and that the mould can be reused. I think the mold must consist of different

    $341 (Avg Bid)
    Ditampilkan Dijamin
    $341
    3 penyertaan

    i am developing a water gun to be used on bicyles and kick scooters. The concept is ready , as well as - very - roug...concept is ready , as well as - very - rough sketch with dimensions. i would now need a genuine designer to draw a nice drawing for this product, so that the injection factory can base itself on it to develop the injection mould.

    $130 (Avg Bid)
    $130 Avg Bida
    28 bida

    Design in 3D a plastic injection mould with hot runners for 4 cavities cups based in a supplied 2D drawing of the Cup. This must be a fully functional plastic injection mould 3d file based on agreed dimensions.

    $173 (Avg Bid)
    $173 Avg Bida
    44 bida

    i want a funky new design for a thermostat and the housing .I need an injection mould to be made for this .

    $474 (Avg Bid)
    $474 Avg Bida
    24 bida

    ...3D model designer that will create us a 3D model for the attached pictures. We need this ASAP and it very easy project. This 3D model will be used for making our plastic mould for mass production. You will see there is a small blade it's a x-acto # 2 size knife blade, see image attached, Dodel Dimension: Length: 14cm(140mm) inside diameter: 7

    $68 (Avg Bid)
    Segera
    $68 Avg Bida
    10 bida

    Convert .ai file into a 3D CAD Solidworks file ifs/stp file that a mould can be made from

    $134 (Avg Bid)
    $134 Avg Bida
    50 bida

    ...to have Good SEO and Good readability scores against yoast for targetted keywords. We require custom images like this: [log masuk untuk melihat URL] We require links from the blogs to go to other pages on the site for SEO. We then want someone to be in charge of social media management, this will be improving

    $225 (Avg Bid)
    $225 Avg Bida
    53 bida

    Meet these criterias: (JPG of the design will be sent to you once you are awarded) "Please note the 3D mould design sheet should be in IGES or SETP format. The mould design sheet should be appear all details specification of this model, such as thickness,model size(length,width,height),structure....etc...."

    $148 (Avg Bid)
    $148 Avg Bida
    59 bida

    3d mould design work on solidwork

    $10 / hr (Avg Bid)
    $10 / hr Avg Bida
    51 bida

    ...come later but make graphics in RGB. We’ll begin the graphics development with the product and its usage. In ‘3_Product Blue Print’ you’ll find a graphic representing the mould bottles in which the solution will be packaged. Included in this folder you’ll find photographs illustrating how the bottles will open. Do not take inspiration for shape from

    $331 (Avg Bid)
    $331 Avg Bida
    41 bida

    I need to make lipstick case look like a cocoa but abstract, have place to stick diamond. Look very luxury and can become a pendent like louboutin. <3 Hope to find good designer to make my dream comes true.

    $350 (Avg Bid)
    $350 Avg Bida
    5 bida

    ...purchase products that require silkscreen frame or mould Customers can go to their side where they get "My silkscreen frame & mould " in the account menu • Product on webpage o Login to see your different images o Select Type: silkscreen frame & mould o Can upload product • Inside " My silkscreen frame & mould " you can add...

    $496 (Avg Bid)
    $496 Avg Bida
    36 bida

    ...the most modern light weight hollow clay blocks. Types of products we deal in: • Traditional Bricks • Extruded Bricks • Cladding Bricks • Fly Ash • Rubber Mould Paver • Rubber Mould Tiles • Brick Clay • Block Clay We also customize bricks as per specific requirements. We believe we are an integral part of our society, close...

    $38153 (Avg Bid)
    $38153 Avg Bida
    4 bida

    Work for Mould design for Aluminium pressure die casting model, with detail Before that to start with, I have the part built already. It needs to be analysed first with any analysis software for temperature/strength at concentrated point for efficiency. As these are the products (housings) for LED Castings. CAD CAE, 3D Modeling and analysis knowledge

    $111 (Avg Bid)
    $111 Avg Bida
    15 bida
    Website Setup Tamat left

    Hello we are looking to creat...Each hosting their own wordpress theme that helps us mould (as layman as possible) the ocntent we wish to host. We're looking for someone who can help us setup the wordpress installation and subdomains optimally with the set themes under each domain - enabling our content creators to then upload/mould/edit as required.

    $359 (Avg Bid)
    $359 Avg Bida
    108 bida
    Modify logo Tamat left

    ...consulting business. I have a number of businesses which have Paragon in their name. One of them is Paragon Technology Resources. I would like to have a logo for it in the same mould as the logo of my business called Paragon Recruitment Services. Same colours ...Same shape....same everything ....just the words "Recruitment Services" replaced by the words

    $19 (Avg Bid)
    $19 Avg Bida
    66 bida

    I need to a 3d mold design for plastic toys.

    $158 (Avg Bid)
    $158 Avg Bida
    44 bida

    I need a very simple 3D model of a toy-car. I t has to be made considering that the CAD model (final format should be .igs or .stp) will be then used to make the mould for die-casting manufacturing, so paying attention to minimum radius and draft angles is also required. It is not for virtual reality, so no textures or rendering effects are required

    $24 (Avg Bid)
    $24 Avg Bida
    7 bida
    mould design Tamat left

    we want plastic injection moulds to be designed

    $80 (Avg Bid)
    $80 Avg Bida
    37 bida

    I need a logo designed. I would like a t shirt print made up. I want to mould together a picture and text I want the caption ‘CAN YOU HACK IT’ With the font shown... written over the picture shown

    $57 (Avg Bid)
    $57 Avg Bida
    29 bida

    ...Cad software starting top right and cutting from there. Then make the reverse with the mould, and an insert that is roughly 1/4" smaller all around to insert into the mould and centre. We should then set up that DXF file to cut the part inside the larger mould to not waste product or foam. We have roughly 300 shapes like this to do. There are

    $889 (Avg Bid)
    $889 Avg Bida
    14 bida

    ...Cad software starting top right and cutting from there. Then make the reverse with the mould, and an insert that is roughly 1/4" smaller all around to insert into the mould and centre. We should then set up that DXF file to cut the part inside the larger mould to not waste product or foam. We have roughly 300 shapes like this to do. There are

    $773 (Avg Bid)
    $773 Avg Bida
    6 bida
    Smartybox.com Tamat left

    Plastic mould designer wanted on project of a collapsible box. 4 moulds needed

    $308 (Avg Bid)
    $308 Avg Bida
    34 bida
    Trophy icon Box for white goat cheese Tamat left

    ...will add English version soon. The name of the cheese: “Andri-Peedo talu valgehallitusjuust kitsepiimast”, please also add the name in English “Andri-Peedo Farm’s White Mould Goat Cheese” Ingredients and nutrition information are also in attachment. Weight of the cheese: 120g Tootja: Andri-Peedo talu OÜ Nõmme Kimalasõ talu R&otild...

    $175 (Avg Bid)
    Dijamin
    $175
    28 penyertaan

    ...sugar until well dissolved and cool. Break eggs into a deep dish, lightly whisked and add milk. Pour mixture into a mould previously caramelized with sugar and a little water and cover with tin foil so no steam escapes. Place mould in cooker with water up to approx. half its height. Close and cook for 4-5 minutes. GENERAL INDICATIONS Pressure

    $8 (Avg Bid)
    $8 Avg Bida
    1 bida

    ...Mother and create a 3D mould that can then be used to transfer the actual finger print to a clay mould to create a piece of jewlery as a keep sake for my family to remember our Mother, the image was take using Garda finger print ink and is in a flat surface, so a high Rest image will need to be take from the card and a CAD drawing created from that to

    $168 (Avg Bid)
    $168 Avg Bida
    67 bida

    ...components in the design are available. • All dimensions must be in mm. • The final design must be stl-file(s) ready for 3D plastic print for prototyping and later-on for mould injection. • PCB Size (30.9 x 67.6) mm EXCLUDING the battery, normally 2xAA batteries. • output should be similar to the attachment. Note: The Enclosure including the device

    $74 (Avg Bid)
    $74 Avg Bida
    43 bida

    Hi Looking for meachncial experienced designer who can develop industrial prototype plant having high temperature application machines and mould design. Experience needs in : MOULD DESIGN, MATERILS SELECTION, TEMPERATURE CONTROL, MODELING OF MACHINES FOR PLANT, MATERIAL TAKEOFF, POWER CONTROL, HYDRAULIC MACHINES

    $470 (Avg Bid)
    $470 Avg Bida
    34 bida

    To design a mould for the manufacture of a composite [log masuk untuk melihat URL] select the appropriate tools, feeds and speeds for the machining process. To use CAD/CAM tools to visualise the machining process and generate the toolpaths and NC code required to efficiently machinea mould

    $132 (Avg Bid)
    $132 Avg Bida
    6 bida

    Drawing and dimensions for small device made from plastic. This device will be placed in urinals and workers will urinate in the top of it. Urine colour will be assessed behind clear screen and drain away through holes in the bottom. A temperature sensitive sticker will be placed at the top to record urine temperature.

    $65 (Avg Bid)
    $65 Avg Bida
    32 bida

    To design a mould for the manufacture of a composite shell. To select the appropriate tools, feeds and speeds for the machining process. To use CAD/CAM tools to visualise the machining process and generate the toolpaths and NC code required to efficiently machine a mould. You are required to use CAD/CAM software (hyperMILL) to generate tool paths for

    $175 (Avg Bid)
    $175 Avg Bida
    15 bida

    Hi Product Designer/CAD/CAM, I noticed your profile and would like to offer you my project. We can di...project. We can discuss any details over chat. I am looking for a suitably capable and qualified person to run an FEA on an 8.0m diameter fiberglass dome that will be used as a mould for a 100mm concrete shell. Is that something you feel you can do?

    $50 / hr (Avg Bid)
    $50 / hr Avg Bida
    1 bida

    ...Engineers. It's an Iso 9001: 2015 certified Indian Company Manufactures Various Types of Injection molded Plastic products, plastic Mechanical or engineering Components & Injection Mould designing and production of Injection Moulded Plastic Items, We also Undertake OEM services. We are planning to expand scope of our business overseas by Exporting our Product

    $541 (Avg Bid)
    $541 Avg Bida
    9 bida

    I would like to hire on an individual who has the expertise to create a two part 3d model of the attached file. Both parts of the mould should fit together using the outlined matching points as well as be to the scale specified. The intention would be to print the finished model by way of a 3d printer. Thanks for your time and consideration.

    $146 (Avg Bid)
    $146 Avg Bida
    95 bida
    Design project Tamat left

    I am a pastry chef and would like to make 1 3D cake mold however I do not know how to use Rhino 5 or 3D max to draft out the mould .

    $78 (Avg Bid)
    $78 Avg Bida
    22 bida

    I need somebody to create a Dynamo script which...arrayed along the 2 curves with a step which could be pre-defined and modified at a later stage. I can provide the Mass model which is going to be used as the mould for the modelling exercise. The Mould has been modelled n Rhino. I want a script which I can use again if the shape changes later as well.

    $47 (Avg Bid)
    $47 Avg Bida
    5 bida

    I have a number of anatomical models made from Z Brush and Cinema 4D. I am looking for someone to simply create moulds from these models so that I can print these moulds from an ultimaker 2 printer. All six organs will require moulds but each of the moulds will need to be made of a number of interlocking pieces so that, once the silicone that we will use to make the models from these moulds is d...

    $102 (Avg Bid)
    $102 Avg Bida
    11 bida

    Hi Looking for meachncial experienced designer who can develop industrial prototype plant having high temperature application machines and mould design. Experience needs in : MOULD DESIGN, MATERILS SELECTION, TEMPERATURE CONTROL, MODELING OF MACHINES FOR PLANT, MATERIAL TAKEOFF, POWER CONTROL, HYDRAULIC MACHINES

    $433 (Avg Bid)
    $433 Avg Bida
    63 bida

    I need a 2016 solidworks file redesigned for injection moulding. I need tabs put on it to screw and i need it split down the middle and the wall thickness cleaned up to a moulding standard. I have a step file for viewing and i need this done for chinese manufacturing

    $162 (Avg Bid)
    $162 Avg Bida
    58 bida
    Trophy icon Design project Tamat left

    I need some graphic design. We are a water and fire Restoration company We need some icons desiged for the following Water/Flood Restoration fire Restoration Mould remediation contents (house Contents) specialised Services Thank you

    $70 (Avg Bid)
    Dijamin
    $70
    18 penyertaan

    ...bigger quantities (because of shipping costs, logistic , etc.). with the help of our partners we are also able to provide following services: injection moulding injection mould design and manufacturing casting (aluminum, cast iron, cast steal) laser/plasma cutting welding product assembly and testing etc... terms of payment will be discussed

    $21 / hr (Avg Bid)
    $21 / hr Avg Bida
    6 bida

    I need cam work for my mould. Need to generate guide.

    $100 (Avg Bid)
    $100 Avg Bida
    24 bida

    Hello we are construction chemical industry and have various products. We need to create a logo for every product. Below are the products that we nee...Flooring System - Concrete Repair And Strengthening - Sealants - Ready Mix Plaster And Putty - Adhesive And Bonding Agent - Protective And Decorative Coating - Curing Compound And Mould Releasing Agent

    $59 (Avg Bid)
    $59 Avg Bida
    29 bida

    ...into consideration while designing:- [log masuk untuk melihat URL] design is to be made as per injection moulding standards [log masuk untuk melihat URL] design should be free of any unnecessary undercuts and should be mould manufacturing ready. The car will be split into several parts, which are:- [log masuk untuk melihat URL] Body [log masuk untuk melihat URL] [log masuk untuk meliha...

    $208 (Avg Bid)
    $208 Avg Bida
    22 bida
    Trophy icon Design the company logo Tamat left

    I need a logo designed. I need a logo designed. Need a logo for my company. We are into engineering works (die mould). The company name is Neeraj Mould. Please ensure you do a quick research about what Die Mould is before submitting entries. This will help me in quickly awarding the contest. The Font chosen should be professional fonts, and represent

    $10 (Avg Bid)
    Dijamin
    $10
    25 penyertaan

    need a original design and 3d model of a chocolate bar mould(with the complete lifetime copyrights given us), the bar should be 100 grams in weight, it should be rectangle, and should have our emblem/[log masuk untuk melihat URL] design on the bar is what that matters and uses your creative skills, normally bars have square shapes on them and we don't mind that but we would

    $55 (Avg Bid)
    Dijamin
    $55
    12 penyertaan

    Design me a mold for Character T of 1 mm thickness. The character dimensions are 50 mm wide and 75 mm long. Will provide the digram for character in required format. The mold should be modular so we can use the same mold assembly to make another characters in it. So this means on the mold, we make only one type of character at a time. The injection molding machine capacity is 300 ton. The charac...

    $60 (Avg Bid)
    $60 Avg Bida
    13 bida
    Trophy icon Design a Logo new product Tamat left

    Our product name is GMC this stands for Glass Mould Cleaning the process is via an automated laser system Attached are our current logos and we would ideally like them to be in the same colour ranges

    $189 (Avg Bid)
    Dijamin
    $189
    435 penyertaan